clabWIFIClientStatsInterval
CLAB-WIFI-MIB ·
.1.3.6.1.4.1.4491.2.5.1.1.14.1.1
Object
column
Unsigned32
The Interval parameter indicate the measurements were accumulated. The interval of measurements is synchronized with the wall clock The total number of intervals is based on a 24 hour period. At an interval of 15 minutes 96 intervals (1..96) are defined, at 30 minutes, 48 intervals (1..48) and 24 intervals (1..24) for 1 hour measurement interval. Devices with no capable to report measurements per interval will report the value 0 for the interval attribute.
Context
- MIB
- CLAB-WIFI-MIB
- OID
.1.3.6.1.4.1.4491.2.5.1.1.14.1.1- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- clabWIFIClientStatsEntry
- Table
- clabWIFIClientStatsTable
- Siblings
- 19
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-0
range: 24-24
range: 48-48
range: 96-96
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| clabWIFIClientStatsDataFramesDuplicateReceived The DataFramesDuplicateReceived parameter indicates the total
number of duplicated frames received on this interface.
The value of this counter MAY be reset to zero when the
CPE… | column | frames SNMPv2-SMICounter64 | .1.3.6.1.4.1.4491.2.5.1.1.14.1.10 |
| clabWIFIClientStatsProbesReceived The ProbesReceived parameter indicates the Total number of
probes received. | column | probes SNMPv2-SMICounter32 | .1.3.6.1.4.1.4491.2.5.1.1.14.1.11 |
| clabWIFIClientStatsProbesRejected The ProbesRejected parameter indicates the total number of
probes rejected. | column | probes SNMPv2-SMICounter32 | .1.3.6.1.4.1.4491.2.5.1.1.14.1.12 |
| clabWIFIClientStatsRSSI The Received Signal Strength Indicator, RSSI, parameter is the
energy observed at the antenna receiver for a current
transmission. | column | dBm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4491.2.5.1.1.14.1.13 |
| clabWIFIClientStatsSNR The signal to Noise Ratio (SNR) parameter indicates the signal
strength received from a client compared to the noise received. | column | dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4491.2.5.1.1.14.1.14 |
| clabWIFIClientStatsDisassociations The Disassociations parameter indicates the total number of
client disassociations. | column | disassociations SNMPv2-SMICounter32 | .1.3.6.1.4.1.4491.2.5.1.1.14.1.15 |
| clabWIFIClientStatsAuthenticationFailures The AuthenticationFailures parameter indicates the total
number of authentication failures. | column | authenticationfailures SNMPv2-SMICounter32 | .1.3.6.1.4.1.4491.2.5.1.1.14.1.16 |
| clabWIFIClientStatsLastTimeAssociation The LastTimeAssociation parameter indicates the Last time
the client was associated. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.4491.2.5.1.1.14.1.17 |
| clabWIFIClientStatsLastTimeDisassociation The LastTimeDisassociation parameter indicates the last time
the client disassociate from the interface.
The all zeros value indicates the client is currently
associated. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.4491.2.5.1.1.14.1.18 |
| clabWIFIClientStatsThroughput This object indicates the throughput expressed in Kbps. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4491.2.5.1.1.14.1.19 |
| clabWIFIClientStatsId The Id key identifies a single client MAC Address. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4491.2.5.1.1.14.1.2 |
| clabWIFIClientStatsPktErrorRatePerSTA This object indicates the traffic quality (e.g., HTTP, TCP)
of a STA. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4491.2.5.1.1.14.1.20 |
| clabWIFIClientStatsDeviceMACAddress The DeviceMACAddress parameter indicates the MAC address of
an associated client device. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.4491.2.5.1.1.14.1.3 |
| clabWIFIClientStatsFramesSent The FramesSent parameter indicates the total number of frames
transmitted out of the interface.
For conventional 802.11 MAC (a,b,g) this counter corresponds
to the total of MSDU… | column | frames SNMPv2-SMICounter64 | .1.3.6.1.4.1.4491.2.5.1.1.14.1.4 |
| clabWIFIClientStatsDataFramesSentAck The DataFramesSentAck parameter indicates the total number of
MSDU frames marked as duplicates and non duplicates acknowledged.
The value of this counter MAY be reset to zero whe… | column | frames SNMPv2-SMICounter64 | .1.3.6.1.4.1.4491.2.5.1.1.14.1.5 |
| clabWIFIClientStatsDataFramesSentNoAck The DataFramesSentNoAck parameter indicates the total number of
MSDU frames retransmitted out of the interface
(i.e., marked as duplicate and non-duplicate) and not acknowledged… | column | frames SNMPv2-SMICounter64 | .1.3.6.1.4.1.4491.2.5.1.1.14.1.6 |
| clabWIFIClientStatsDataFramesLost The DataFramesLost parameter indicates the total number of
MSDU frames retransmitted out of the interface that where not
acknowledged and discarded for reaching max number of
r… | column | frames SNMPv2-SMICounter64 | .1.3.6.1.4.1.4491.2.5.1.1.14.1.7 |
| clabWIFIClientStatsFramesReceived The FramesReceived parameter indicates the total number of
frames received by the interface.
For conventional 802.11 MAC (a,b,g) this counter corresponds
to the total of MSDUs (… | column | frames SNMPv2-SMICounter64 | .1.3.6.1.4.1.4491.2.5.1.1.14.1.8 |
| clabWIFIClientStatsDataFramesReceived The DataFramesReceived parameter indicates the total number
of MSDU frames received and marked as non-duplicates.
The value of this counter MAY be reset to zero when the CPE
is… | column | frames SNMPv2-SMICounter64 | .1.3.6.1.4.1.4491.2.5.1.1.14.1.9 |