clabWIFIClientStatsFramesSent
CLAB-WIFI-MIB ·
.1.3.6.1.4.1.4491.2.5.1.1.14.1.4
Object
The FramesSent parameter indicates the total number of frames transmitted out of the interface. For conventional 802.11 MAC (a,b,g) this counter corresponds to the total of MSDUs (MAC Service Data Unit) being transmitted. For High Throughput transmissions this corresponds to the A-MSDU (Aggregation MSDU) The value of this counter MAY be reset to zero when the CPE is rebooted.
Context
- MIB
- CLAB-WIFI-MIB
- OID
.1.3.6.1.4.1.4491.2.5.1.1.14.1.4- Type
- column
- Access
- readonly
- Status
- current
- Units
- frames
- Parent
- clabWIFIClientStatsEntry
- Table
- clabWIFIClientStatsTable
- Siblings
- 19
Syntax
frames SNMPv2-SMICounter64
- Source
- SNMPv2-SMICounter64
- Base type
Unsigned64
Values & Constraints
Type Constraints
range: 0..18446744073709551615
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| clabWIFIClientStatsInterval The Interval parameter indicate the measurements were
accumulated.
The interval of measurements is synchronized with the
wall clock
The total number of intervals is based on a 2… | column | Unsigned32 | .1.3.6.1.4.1.4491.2.5.1.1.14.1.1 |
| clabWIFIClientStatsDataFramesDuplicateReceived The DataFramesDuplicateReceived parameter indicates the total
number of duplicated frames received on this interface.
The value of this counter MAY be reset to zero when the
CPE… | column | frames SNMPv2-SMICounter64 | .1.3.6.1.4.1.4491.2.5.1.1.14.1.10 |
| clabWIFIClientStatsProbesReceived The ProbesReceived parameter indicates the Total number of
probes received. | column | probes SNMPv2-SMICounter32 | .1.3.6.1.4.1.4491.2.5.1.1.14.1.11 |
| clabWIFIClientStatsProbesRejected The ProbesRejected parameter indicates the total number of
probes rejected. | column | probes SNMPv2-SMICounter32 | .1.3.6.1.4.1.4491.2.5.1.1.14.1.12 |
| clabWIFIClientStatsRSSI The Received Signal Strength Indicator, RSSI, parameter is the
energy observed at the antenna receiver for a current
transmission. | column | dBm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4491.2.5.1.1.14.1.13 |
| clabWIFIClientStatsSNR The signal to Noise Ratio (SNR) parameter indicates the signal
strength received from a client compared to the noise received. | column | dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4491.2.5.1.1.14.1.14 |
| clabWIFIClientStatsDisassociations The Disassociations parameter indicates the total number of
client disassociations. | column | disassociations SNMPv2-SMICounter32 | .1.3.6.1.4.1.4491.2.5.1.1.14.1.15 |
| clabWIFIClientStatsAuthenticationFailures The AuthenticationFailures parameter indicates the total
number of authentication failures. | column | authenticationfailures SNMPv2-SMICounter32 | .1.3.6.1.4.1.4491.2.5.1.1.14.1.16 |
| clabWIFIClientStatsLastTimeAssociation The LastTimeAssociation parameter indicates the Last time
the client was associated. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.4491.2.5.1.1.14.1.17 |
| clabWIFIClientStatsLastTimeDisassociation The LastTimeDisassociation parameter indicates the last time
the client disassociate from the interface.
The all zeros value indicates the client is currently
associated. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.4491.2.5.1.1.14.1.18 |
| clabWIFIClientStatsThroughput This object indicates the throughput expressed in Kbps. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4491.2.5.1.1.14.1.19 |
| clabWIFIClientStatsId The Id key identifies a single client MAC Address. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4491.2.5.1.1.14.1.2 |
| clabWIFIClientStatsPktErrorRatePerSTA This object indicates the traffic quality (e.g., HTTP, TCP)
of a STA. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4491.2.5.1.1.14.1.20 |
| clabWIFIClientStatsDeviceMACAddress The DeviceMACAddress parameter indicates the MAC address of
an associated client device. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.4491.2.5.1.1.14.1.3 |
| clabWIFIClientStatsDataFramesSentAck The DataFramesSentAck parameter indicates the total number of
MSDU frames marked as duplicates and non duplicates acknowledged.
The value of this counter MAY be reset to zero whe… | column | frames SNMPv2-SMICounter64 | .1.3.6.1.4.1.4491.2.5.1.1.14.1.5 |
| clabWIFIClientStatsDataFramesSentNoAck The DataFramesSentNoAck parameter indicates the total number of
MSDU frames retransmitted out of the interface
(i.e., marked as duplicate and non-duplicate) and not acknowledged… | column | frames SNMPv2-SMICounter64 | .1.3.6.1.4.1.4491.2.5.1.1.14.1.6 |
| clabWIFIClientStatsDataFramesLost The DataFramesLost parameter indicates the total number of
MSDU frames retransmitted out of the interface that where not
acknowledged and discarded for reaching max number of
r… | column | frames SNMPv2-SMICounter64 | .1.3.6.1.4.1.4491.2.5.1.1.14.1.7 |
| clabWIFIClientStatsFramesReceived The FramesReceived parameter indicates the total number of
frames received by the interface.
For conventional 802.11 MAC (a,b,g) this counter corresponds
to the total of MSDUs (… | column | frames SNMPv2-SMICounter64 | .1.3.6.1.4.1.4491.2.5.1.1.14.1.8 |
| clabWIFIClientStatsDataFramesReceived The DataFramesReceived parameter indicates the total number
of MSDU frames received and marked as non-duplicates.
The value of this counter MAY be reset to zero when the CPE
is… | column | frames SNMPv2-SMICounter64 | .1.3.6.1.4.1.4491.2.5.1.1.14.1.9 |