clabWIFIClientStatsFramesReceived

CLAB-WIFI-MIB · .1.3.6.1.4.1.4491.2.5.1.1.14.1.8

Object

column frames SNMPv2-SMICounter64

The FramesReceived parameter indicates the total number of 
frames received by the interface.
For conventional 802.11 MAC (a,b,g) this counter corresponds 
to the total of MSDUs (MAC Service Data Unit) being transmitted.
For High Throughput transmissions (n) this corresponds to 
A-MSDUs (Aggregation MSDU) and MSDUs.
The value of this counter MAY be reset to zero when the 
CPE is rebooted.

Context

MIB: CLAB-WIFI-MIB
OID: .1.3.6.1.4.1.4491.2.5.1.1.14.1.8
Type: column
Access: readonly
Status: current
Units: frames
Parent: clabWIFIClientStatsEntry
Table: clabWIFIClientStatsTable
Siblings: 19

Syntax

frames SNMPv2-SMICounter64

Source: SNMPv2-SMICounter64
Base type: Unsigned64

Values & Constraints

Type Constraints

range: 0..18446744073709551615

Related Objects

Sibling Objects

Object	Type	Syntax	OID
clabWIFIClientStatsInterval The Interval parameter indicate the measurements were accumulated. The interval of measurements is synchronized with the wall clock The total number of intervals is based on a 2…	column	Unsigned32	`.1.3.6.1.4.1.4491.2.5.1.1.14.1.1`
clabWIFIClientStatsDataFramesDuplicateReceived The DataFramesDuplicateReceived parameter indicates the total number of duplicated frames received on this interface. The value of this counter MAY be reset to zero when the CPE…	column	frames SNMPv2-SMICounter64	`.1.3.6.1.4.1.4491.2.5.1.1.14.1.10`
clabWIFIClientStatsProbesReceived The ProbesReceived parameter indicates the Total number of probes received.	column	probes SNMPv2-SMICounter32	`.1.3.6.1.4.1.4491.2.5.1.1.14.1.11`
clabWIFIClientStatsProbesRejected The ProbesRejected parameter indicates the total number of probes rejected.	column	probes SNMPv2-SMICounter32	`.1.3.6.1.4.1.4491.2.5.1.1.14.1.12`
clabWIFIClientStatsRSSI The Received Signal Strength Indicator, RSSI, parameter is the energy observed at the antenna receiver for a current transmission.	column	dBm SNMPv2-SMIInteger32	`.1.3.6.1.4.1.4491.2.5.1.1.14.1.13`
clabWIFIClientStatsSNR The signal to Noise Ratio (SNR) parameter indicates the signal strength received from a client compared to the noise received.	column	dB SNMPv2-SMIInteger32	`.1.3.6.1.4.1.4491.2.5.1.1.14.1.14`
clabWIFIClientStatsDisassociations The Disassociations parameter indicates the total number of client disassociations.	column	disassociations SNMPv2-SMICounter32	`.1.3.6.1.4.1.4491.2.5.1.1.14.1.15`
clabWIFIClientStatsAuthenticationFailures The AuthenticationFailures parameter indicates the total number of authentication failures.	column	authenticationfailures SNMPv2-SMICounter32	`.1.3.6.1.4.1.4491.2.5.1.1.14.1.16`
clabWIFIClientStatsLastTimeAssociation The LastTimeAssociation parameter indicates the Last time the client was associated.	column	SNMPv2-TCDateAndTime	`.1.3.6.1.4.1.4491.2.5.1.1.14.1.17`
clabWIFIClientStatsLastTimeDisassociation The LastTimeDisassociation parameter indicates the last time the client disassociate from the interface. The all zeros value indicates the client is currently associated.	column	SNMPv2-TCDateAndTime	`.1.3.6.1.4.1.4491.2.5.1.1.14.1.18`
clabWIFIClientStatsThroughput This object indicates the throughput expressed in Kbps.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.4491.2.5.1.1.14.1.19`
clabWIFIClientStatsId The Id key identifies a single client MAC Address.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.4491.2.5.1.1.14.1.2`
clabWIFIClientStatsPktErrorRatePerSTA This object indicates the traffic quality (e.g., HTTP, TCP) of a STA.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.4491.2.5.1.1.14.1.20`
clabWIFIClientStatsDeviceMACAddress The DeviceMACAddress parameter indicates the MAC address of an associated client device.	column	SNMPv2-TCMacAddress	`.1.3.6.1.4.1.4491.2.5.1.1.14.1.3`
clabWIFIClientStatsFramesSent The FramesSent parameter indicates the total number of frames transmitted out of the interface. For conventional 802.11 MAC (a,b,g) this counter corresponds to the total of MSDU…	column	frames SNMPv2-SMICounter64	`.1.3.6.1.4.1.4491.2.5.1.1.14.1.4`
clabWIFIClientStatsDataFramesSentAck The DataFramesSentAck parameter indicates the total number of MSDU frames marked as duplicates and non duplicates acknowledged. The value of this counter MAY be reset to zero whe…	column	frames SNMPv2-SMICounter64	`.1.3.6.1.4.1.4491.2.5.1.1.14.1.5`
clabWIFIClientStatsDataFramesSentNoAck The DataFramesSentNoAck parameter indicates the total number of MSDU frames retransmitted out of the interface (i.e., marked as duplicate and non-duplicate) and not acknowledged…	column	frames SNMPv2-SMICounter64	`.1.3.6.1.4.1.4491.2.5.1.1.14.1.6`
clabWIFIClientStatsDataFramesLost The DataFramesLost parameter indicates the total number of MSDU frames retransmitted out of the interface that where not acknowledged and discarded for reaching max number of r…	column	frames SNMPv2-SMICounter64	`.1.3.6.1.4.1.4491.2.5.1.1.14.1.7`
clabWIFIClientStatsDataFramesReceived The DataFramesReceived parameter indicates the total number of MSDU frames received and marked as non-duplicates. The value of this counter MAY be reset to zero when the CPE is…	column	frames SNMPv2-SMICounter64	`.1.3.6.1.4.1.4491.2.5.1.1.14.1.9`

Indexes