pktcEUERSTNfBCallOverrideNotifyRejected
CL-PKTC-EUE-RST-MIB ·
.1.3.6.1.4.1.4491.2.2.8.2.1.2.1.2.1.18
Object
This MIB Object specifies a control mechanism to override the
NOTIFY Rejected Event behavior.
The value 'true' instructs the UE to follow the behavior of
receiving a reg event NOTIFY with the associated event
attribute element 'deactivated' for the case where the
event attribute is set to 'rejected'. In other words,
if this attribute is set to 'true' the UE public identities
associated with this operator will e.g., de-register and start
registration when the reg event attribute is set to 'rejected'.
The value 'false' indicates the UE follows the standard
procedures defined in the PacketCable IMS Delta Specification
24.229 for the 'rejected' attribute of the reg event.
Context
- MIB
- CL-PKTC-EUE-RST-MIB
- OID
.1.3.6.1.4.1.4491.2.2.8.2.1.2.1.2.1.18- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- pktcEUERSTNfBasicCallEntry
- Table
- pktcEUERSTNfBasicCallTable
- Siblings
- 17
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pktcEUERSTNfBCallByeDelay This MIB Object specifies the Bye Delay in seconds. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4491.2.2.8.2.1.2.1.2.1.1 |
| pktcEUERSTNfBCallPermSeqTimer3 This MIB Object specifies the Permanent Sequence timer 3
in seconds. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4491.2.2.8.2.1.2.1.2.1.10 |
| pktcEUERSTNfBCallLORTimer This MIB Object specifies the Lockout Reset timer in seconds. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4491.2.2.8.2.1.2.1.2.1.11 |
| pktcEUERSTNfBCallNEMDSCPValueMedia This MIB Object specifies the Non-Emergency DSCP Value
for network packets carrying the Media (RTP) information. | column | Unsigned32 | .1.3.6.1.4.1.4491.2.2.8.2.1.2.1.2.1.12 |
| pktcEUERSTNfBCallNEMDSCPValueSig This MIB Object specifies the Non-Emergency DSCP Value
for network packets carrying the signaling information. | column | Unsigned32 | .1.3.6.1.4.1.4491.2.2.8.2.1.2.1.2.1.13 |
| pktcEUERSTNfBCallStatus The status of this conceptual row.
There is no restriction on the ability to change values in this
row while the row is active.
A created row can be set to active only after all … | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.4491.2.2.8.2.1.2.1.2.1.14 |
| pktcEUERSTNFBCallOrigModLongIntDig This MIB Object specifies the Origination Mode Long Interdigit
Timer in seconds. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4491.2.2.8.2.1.2.1.2.1.15 |
| pktcEUERSTNfBCallPermSeqTone4 This MIB Object specifies the Permanent Sequence tone 4. | column | URI-TC-MIBUri | .1.3.6.1.4.1.4491.2.2.8.2.1.2.1.2.1.16 |
| pktcEUERSTNfBCallPermSeqTimer4 This MIB Object specifies the Permanent Sequence timer 4
in seconds. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4491.2.2.8.2.1.2.1.2.1.17 |
| pktcEUERSTNfBCallOrigDTTimer This MIB Object specifies the Origination Mode
Dial Tone Timer in seconds. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4491.2.2.8.2.1.2.1.2.1.2 |
| pktcEUERSTNfBCallTermOHErrSig This MIB Object specifies the Termination Mode Off-Hook
error signal. | column | URI-TC-MIBUri | .1.3.6.1.4.1.4491.2.2.8.2.1.2.1.2.1.3 |
| pktcEUERSTNfBCallTermErrSigTimer This MIB Object specifies the Termination Mode error signal
timer in seconds. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4491.2.2.8.2.1.2.1.2.1.4 |
| pktcEUERSTNfBCallPermSeqTone1 This MIB Object specifies the Permanent Sequence tone 1. | column | URI-TC-MIBUri | .1.3.6.1.4.1.4491.2.2.8.2.1.2.1.2.1.5 |
| pktcEUERSTNfBCallPermSeqTimer1 This MIB Object specifies the Permanent Sequence timer 1
in seconds. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4491.2.2.8.2.1.2.1.2.1.6 |
| pktcEUERSTNfBCallPermSeqTone2 This MIB Object specifies the Permanent Sequence tone 2. | column | URI-TC-MIBUri | .1.3.6.1.4.1.4491.2.2.8.2.1.2.1.2.1.7 |
| pktcEUERSTNfBCallPermSeqTimer2 This MIB Object specifies the Permanent Sequence timer 2
in seconds. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4491.2.2.8.2.1.2.1.2.1.8 |
| pktcEUERSTNfBCallPermSeqTone3 This MIB Object specifies the Permanent Sequence tone 3. | column | URI-TC-MIBUri | .1.3.6.1.4.1.4491.2.2.8.2.1.2.1.2.1.9 |