rldot1xTimeoutSilencePeriod

CISCOSB-DOT1X-MIB · .1.3.6.1.4.1.9.6.1.101.95.10.1.9
MIB view Table view

Object

column r/w Integer32 
Set the number of seconds that if an authorized client did not send traffic during this period,
then the client is changed to unauthrized.
The configuration is applied only to Web-Based authentication.

Context

MIB
CISCOSB-DOT1X-MIB
OID
.1.3.6.1.4.1.9.6.1.101.95.10.1.9
Type
column
Access
readwrite
Status
current
Parent
rldot1xAuthenticationPortEntry
Table
rldot1xAuthenticationPortTable
Siblings
11

Syntax

Integer32

Values & Constraints

Object Constraints
range: 0-65535

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
rldot1xAuthenticationPortMethod
The value of the 802.1x-based, mac-based and web-based authentication.
columnEnumeration.1.3.6.1.4.1.9.6.1.101.95.10.1.1
rldot1xNumOfAuthorizedHosts
Number of authorized host in multi-sessions mode.
columnInteger32.1.3.6.1.4.1.9.6.1.101.95.10.1.10
rldot1xAuthenticationOpenEnabled
Open access allows clients or devices to gain network access before authentication is performed. In the mode the switch performs failure replies received from a Radius server as s…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.6.1.101.95.10.1.11
rldot1xAuthenticationOperatingControlMode
Operational control mode of 802.1x.
columnEnumeration.1.3.6.1.4.1.9.6.1.101.95.10.1.12
rldot1xRadiusAttrVlanIdEnabled
Defines if treat VLAN ID that received from Radius attributes in Radius-Accept message.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.6.1.101.95.10.1.2
rldot1xRadiusAttAclNameEnabled
Defines if treat ACL Names that received from Radius attributes in Radius-Accept message.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.6.1.101.95.10.1.3
rldot1xTimeBasedName
Specifies a time range. When the Time Range is not in effect the port state would be Unauthorized.
columnOctetString.1.3.6.1.4.1.9.6.1.101.95.10.1.4
rldot1xTimeBasedActive
Specifies if time range is active now or not.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.6.1.101.95.10.1.5
rldot1xRadiusAttrVlanIdentifier
In case that value is not 0, This field will define the VLAN ID in case that it is not received from Radius attributes in Radius-Accept message.
columnQ-BRIDGE-MIBVlanIndex.1.3.6.1.4.1.9.6.1.101.95.10.1.6
rldot1xMaxHosts
Maximum number of authenticated hosts allowed on the interface. A value of 0 means no limitation.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.9.6.1.101.95.10.1.7
rldot1xMaxLoginAttempts
Maximum number of allowedlogin attempts on the interface. A value of 0 means the infinite number of attemtps. The configuration is applied only to Web-Based authentication.
columnInteger32.1.3.6.1.4.1.9.6.1.101.95.10.1.8