rlCdpTlvPowerRequestTable

CISCOSB-CDP-MIB · .1.3.6.1.4.1.9.6.1.101.137.21
MIB view Table view

Object

table 
The (conceptual) table contains the local advertised requested power levels
in Power Requested TLV.
indexed by rlCdpTlvPowerRequestEntry.

Context

MIB
CISCOSB-CDP-MIB
OID
.1.3.6.1.4.1.9.6.1.101.137.21
Type
table
Status
current
Parent
rlCdp
Siblings
22
Children
1

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
rlCdpVersionAdvertised
Specifies the verison of sent CDP packets
scalarRlCdpVersionTypes.1.3.6.1.4.1.9.6.1.101.137.1
rlCdpLogMismatchVoiceVlanEnable
Enable logging messages when detecting mishmatch between advertised and received voice VLAN. To enable logging on specific interface set the corresponing bit.
scalarQ-BRIDGE-MIBPortList.1.3.6.1.4.1.9.6.1.101.137.10
rlCdpLogMismatchNativeVlanEnable
Enable logging messages when detecting mishmatch between advertised and received native VLAN. To enable loging on specific interface set the corresponing bit.
scalarQ-BRIDGE-MIBPortList.1.3.6.1.4.1.9.6.1.101.137.11
rlCdpSecondaryCacheTable
The (conceptual) table contains partial information from cdpCache table. indexed by rlCdpSecondaryCacheEntry.
table-.1.3.6.1.4.1.9.6.1.101.137.12
rlCdpGlobalLogMismatchDuplexEnable
Globally enable/disable logging messages when detecting mishmatch between advertised and received duplex mode.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.9.6.1.101.137.13
rlCdpGlobalLogMismatchVoiceVlanEnable
Globally enable/disable logging messages when detecting mishmatch between advertised and received voice VLAN.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.9.6.1.101.137.14
rlCdpGlobalLogMismatchNativeVlanEnable
Globally enable/disable logging messages when detecting mishmatch between advertised and received native VLAN.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.9.6.1.101.137.15
rlCdpTlvTable
The (conceptual) table contains the local advertised information. indexed by rlCdpTlvEntry.
table-.1.3.6.1.4.1.9.6.1.101.137.16
rlCdpAdvertiseApplianceTlv
By setting the MIB to True Appliance VLAN-ID TLV may be advertised. A value of False will prevent this TLV from being advertised.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.9.6.1.101.137.17
rlCdpValidateMandatoryTlvs
By setting the MIB to true all mandatory TLVs 0x0001-0x0006 will be validated. Incoming CDP frames without any of the TLVs will be dropped. A value of false indicates that only th…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.9.6.1.101.137.18
rlCdpInterfaceCountersTable
This table contains all CDP counter values, indexed by interface id.
table-.1.3.6.1.4.1.9.6.1.101.137.19
rlCdpSourceInterface
Specifices the CDP source-interface, which the IP address advertised into TLV is accoding to this source-interface instead of the outgoing interface. value of 0 indicates no sourc…
scalarIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.9.6.1.101.137.2
rlCdpInterfaceCountersClear
By setting the scalar to a interface id , all error and traffic counters of this interface are set to zero. To clear the counters for ALL interfaces set the scalar to 0x0FFFFFFF
scalarIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.9.6.1.101.137.20
rlCdpSecondaryCacheAddressTable
The (conceptual) table containing the list of network-layer addresses of a neighbor interface, as reported in the Address TLV of the most recently received CDP message and stored …
table-.1.3.6.1.4.1.9.6.1.101.137.22
rlCdpSecondaryCacheRequestedPowerTable
The (conceptual) table containing the list of requested power levels by a remote device, as reported in the Power Requested TLV of the most recently received CDP message and store…
table-.1.3.6.1.4.1.9.6.1.101.137.23
rlCdpLogMismatchDuplexEnable
Enable logging messages when detecting mishmatch between advertised and received duplex mode. To enable loging on specific interface set the corresponing bit.
scalarQ-BRIDGE-MIBPortList.1.3.6.1.4.1.9.6.1.101.137.3
rlCdpCountersTable
This table contains all cdp counter values, indexed by conter name
table-.1.3.6.1.4.1.9.6.1.101.137.4
rlCdpCountersClear
By setting the MIB to True, all error and traffic counters are set to zero.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.9.6.1.101.137.5
rlCdpCacheClear
By setting the MIB to True, all entries from the cdp cache table is deleted.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.9.6.1.101.137.6
rlCdpVoiceVlanId obsolete
voice vlan Id, used as the Appliance Vlan-Id TLV
scalarInteger32.1.3.6.1.4.1.9.6.1.101.137.7
rlCdpCacheTable
The (conceptual) table contains externtion for the cdpCache table. indexed by cdpCacheEntry.
table-.1.3.6.1.4.1.9.6.1.101.137.8
rlCdpPduAction
Defines CDP packets handling when CDP is globally disabled.
scalarRlCdpPduActionTypes.1.3.6.1.4.1.9.6.1.101.137.9
Child Objects
ObjectTypeSyntaxOID
rlCdpTlvPowerRequestEntry
An entry (conceptual row) in the rlCdpTlvPowerRequestTable, containing locally requested power levels advertised by CDP on one interface. Entries are available only when CDP is gl…
row-.1.3.6.1.4.1.9.6.1.101.137.21.1