rlCdpTlvAddress2
CISCOSB-CDP-MIB ·
.1.3.6.1.4.1.9.6.1.101.137.16.1.7
Object
column
INET-ADDRESS-MIBInetAddress
The (first) network-layer address of the device as will be advertised in the Address TLV of subsequent CDP messages. For example, if the corresponding instance of rlCdpTlvAddress2Type had the value 'ipv6(2)', then this object would be an IPv6-address.
Context
- MIB
- CISCOSB-CDP-MIB
- OID
.1.3.6.1.4.1.9.6.1.101.137.16.1.7- Type
- column
- Access
- readonly
- Status
- current
- Parent
- rlCdpTlvEntry
- Table
- rlCdpTlvTable
- Siblings
- 27
Syntax
INET-ADDRESS-MIBInetAddress
- Source
- INET-ADDRESS-MIBInetAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rlCdpTlvIfIndex The ifIndex value of the local interface.
A value of zero is used to access TLVs which do not
changed between interfaces. | column | Unsigned32 | .1.3.6.1.4.1.9.6.1.101.137.16.1.1 |
| rlCdpTlvPortId The Port-ID string as will be advertised in subsequent CDP messages from
this interface. This will typically be the value of the ifName
object (e.g., 'Ethernet0'). | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.9.6.1.101.137.16.1.10 |
| rlCdpTlvCapabilities The Device's Functional Capabilities as will be advertised in
subsequent CDP messages. For latest set of specific
values, see the latest version of the CDP specification. | column | OctetString | .1.3.6.1.4.1.9.6.1.101.137.16.1.11 |
| rlCdpTlvVersion The Version string as will be advertised in subsequent CDP messages. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.9.6.1.101.137.16.1.12 |
| rlCdpTlvPlatform The Device's Hardware Platform as will be advertised in subsequent
CDP messages. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.9.6.1.101.137.16.1.13 |
| rlCdpTlvNativeVLAN The local device's interface's native VLAN, as will be
advertised in subsequent CDP messages. | column | Unsigned32 | .1.3.6.1.4.1.9.6.1.101.137.16.1.14 |
| rlCdpTlvDuplex The local device's interface's duplex mode, as will be advertised
in subsequent CDP messages. | column | Enumeration | .1.3.6.1.4.1.9.6.1.101.137.16.1.15 |
| rlCdpTlvApplianceID The local device's Appliance ID, as will be advertised in subsequent
CDP messages. A value of zero denotes no Appliance VLAN-ID TLV will be
advertised in subsequent CDP messages. | column | Unsigned32 | .1.3.6.1.4.1.9.6.1.101.137.16.1.16 |
| rlCdpTlvApplianceVlanID The local device's VoIP VLAN ID, as will be advertised in subsequent
CDP messages. A value of zero denotes no Appliance VLAN-ID TLV will be
advertised in subsequent CDP messages. | column | Unsigned32 | .1.3.6.1.4.1.9.6.1.101.137.16.1.17 |
| rlCdpTlvExtendedTrust The local device's interface's extended trust mode, as will be advertised
in subsequent CDP messages. A value of zero indicates the absence of extended
trust. | column | Enumeration | .1.3.6.1.4.1.9.6.1.101.137.16.1.18 |
| rlCdpTlvCosForUntrustedPorts The COS value with which all packets received on an
untrusted port should be marked by a simple switching device
which cannot itself classify individual packets.
This TLV only has… | column | Unsigned32 | .1.3.6.1.4.1.9.6.1.101.137.16.1.19 |
| rlCdpTlvDeviceIdFormat An indication of the format of Device-Id contained in the
corresponding instance of rlCdpTlvDeviceId.
serialNumber(1) indicates that the value of rlCdpTlvDeviceId
o… | column | Enumeration | .1.3.6.1.4.1.9.6.1.101.137.16.1.2 |
| rlCdpTlvPowerAvailableRequestId The Power Available TLV Request-ID field echoes the Request-ID field
last received in a Power Requested TLV. It is 0 if no Power Requested TLV
has been received since the interfa… | column | Unsigned32 | .1.3.6.1.4.1.9.6.1.101.137.16.1.20 |
| rlCdpTlvPowerAvailablePowerManagementId The Power Available TLV Power-Management-ID field. | column | Unsigned32 | .1.3.6.1.4.1.9.6.1.101.137.16.1.21 |
| rlCdpTlvPowerAvailable The Power Available TLV Available-Power field indicates the
number of milliwatts of power available to powered devices at the
time this object is instatiated.
A value of 0xFFFFFF… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.6.1.101.137.16.1.22 |
| rlCdpTlvPowerAvailableManagementPowerLevel The Power Available TLV Management-Power-Level field indicates the
number of milliwatts representing the supplier's request to the powered
device for its Power Consumption TLV. A … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.6.1.101.137.16.1.23 |
| rlCdpTlvSysName The sysName MIB as will be advertised in subsequent CDP messages. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.9.6.1.101.137.16.1.24 |
| rlCdpTlvPowerConsumption The value of Power Consumption TLV indicates the maximum amount of
power, in milliwatts, expected to be obtained and consumed from
the interface over which the CDP packet is sent.… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.6.1.101.137.16.1.25 |
| rlCdpTlvPowerRequestedRequestId The Power Requested TLV Request-ID field.
A value of zero indicates that the Power Requested TLV is not advertised. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.6.1.101.137.16.1.26 |
| rlCdpTlvPowerRequestedPowerManagementId The Power Requested TLV Power-Management-ID field echoes the Management-
Power-ID field in the last received Power Available TLV, or to 0,
if no Power Available TLV has been rece… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.6.1.101.137.16.1.27 |
| rlCdpTlvSparePairPoECapabilities The capabilities advertised in the Spare-Pair POE TLV.
The bit 'supported(0)' indicates that the device supports Spare Pair POE.
The bit 'detectionClassificationRequired(1)' indic… | column | Bits | .1.3.6.1.4.1.9.6.1.101.137.16.1.28 |
| rlCdpTlvDeviceId The Device-ID string as will be advertised in subsequent CDP
messages. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.9.6.1.101.137.16.1.3 |
| rlCdpTlvAddress1Type The Inet address type of rlCdpTlvAddress1 | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.6.1.101.137.16.1.4 |
| rlCdpTlvAddress1 The (first) network-layer address of the device
as will be advertised in the Address TLV of subsequent
CDP messages. For example, if the corresponding instance of
rlCdpTlvAddress… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.6.1.101.137.16.1.5 |
| rlCdpTlvAddress2Type The Inet address type of rlCdpTlvAddress2 | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.6.1.101.137.16.1.6 |
| rlCdpTlvAddress3Type The Inet address type of rlCdpTlvAddress3 | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.6.1.101.137.16.1.8 |
| rlCdpTlvAddress3 The (first) network-layer address of the device
as will be advertised in the Address TLV of subsequent
CDP messages. For example, if the corresponding instance of
rlCdpTlvAddress… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.6.1.101.137.16.1.9 |