rlCdpLogMismatchVoiceVlanEnable

CISCOSB-CDP-MIB · .1.3.6.1.4.1.9.6.1.101.137.10
MIB view Table view

Object

scalar r/w Q-BRIDGE-MIBPortList 
Enable logging messages when detecting mishmatch between
advertised and received voice VLAN.
To enable logging on specific interface set the corresponing bit.

Context

MIB
CISCOSB-CDP-MIB
OID
.1.3.6.1.4.1.9.6.1.101.137.10
Type
scalar
Access
readwrite
Status
current
Parent
rlCdp
Siblings
22

Syntax

Q-BRIDGE-MIBPortList
Source
Q-BRIDGE-MIBPortList
Base type
OctetString

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
rlCdpVersionAdvertised
Specifies the verison of sent CDP packets
scalarRlCdpVersionTypes.1.3.6.1.4.1.9.6.1.101.137.1
rlCdpLogMismatchNativeVlanEnable
Enable logging messages when detecting mishmatch between advertised and received native VLAN. To enable loging on specific interface set the corresponing bit.
scalarQ-BRIDGE-MIBPortList.1.3.6.1.4.1.9.6.1.101.137.11
rlCdpSecondaryCacheTable
The (conceptual) table contains partial information from cdpCache table. indexed by rlCdpSecondaryCacheEntry.
table-.1.3.6.1.4.1.9.6.1.101.137.12
rlCdpGlobalLogMismatchDuplexEnable
Globally enable/disable logging messages when detecting mishmatch between advertised and received duplex mode.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.9.6.1.101.137.13
rlCdpGlobalLogMismatchVoiceVlanEnable
Globally enable/disable logging messages when detecting mishmatch between advertised and received voice VLAN.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.9.6.1.101.137.14
rlCdpGlobalLogMismatchNativeVlanEnable
Globally enable/disable logging messages when detecting mishmatch between advertised and received native VLAN.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.9.6.1.101.137.15
rlCdpTlvTable
The (conceptual) table contains the local advertised information. indexed by rlCdpTlvEntry.
table-.1.3.6.1.4.1.9.6.1.101.137.16
rlCdpAdvertiseApplianceTlv
By setting the MIB to True Appliance VLAN-ID TLV may be advertised. A value of False will prevent this TLV from being advertised.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.9.6.1.101.137.17
rlCdpValidateMandatoryTlvs
By setting the MIB to true all mandatory TLVs 0x0001-0x0006 will be validated. Incoming CDP frames without any of the TLVs will be dropped. A value of false indicates that only th…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.9.6.1.101.137.18
rlCdpInterfaceCountersTable
This table contains all CDP counter values, indexed by interface id.
table-.1.3.6.1.4.1.9.6.1.101.137.19
rlCdpSourceInterface
Specifices the CDP source-interface, which the IP address advertised into TLV is accoding to this source-interface instead of the outgoing interface. value of 0 indicates no sourc…
scalarIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.9.6.1.101.137.2
rlCdpInterfaceCountersClear
By setting the scalar to a interface id , all error and traffic counters of this interface are set to zero. To clear the counters for ALL interfaces set the scalar to 0x0FFFFFFF
scalarIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.9.6.1.101.137.20
rlCdpTlvPowerRequestTable
The (conceptual) table contains the local advertised requested power levels in Power Requested TLV. indexed by rlCdpTlvPowerRequestEntry.
table-.1.3.6.1.4.1.9.6.1.101.137.21
rlCdpSecondaryCacheAddressTable
The (conceptual) table containing the list of network-layer addresses of a neighbor interface, as reported in the Address TLV of the most recently received CDP message and stored …
table-.1.3.6.1.4.1.9.6.1.101.137.22
rlCdpSecondaryCacheRequestedPowerTable
The (conceptual) table containing the list of requested power levels by a remote device, as reported in the Power Requested TLV of the most recently received CDP message and store…
table-.1.3.6.1.4.1.9.6.1.101.137.23
rlCdpLogMismatchDuplexEnable
Enable logging messages when detecting mishmatch between advertised and received duplex mode. To enable loging on specific interface set the corresponing bit.
scalarQ-BRIDGE-MIBPortList.1.3.6.1.4.1.9.6.1.101.137.3
rlCdpCountersTable
This table contains all cdp counter values, indexed by conter name
table-.1.3.6.1.4.1.9.6.1.101.137.4
rlCdpCountersClear
By setting the MIB to True, all error and traffic counters are set to zero.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.9.6.1.101.137.5
rlCdpCacheClear
By setting the MIB to True, all entries from the cdp cache table is deleted.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.9.6.1.101.137.6
rlCdpVoiceVlanId obsolete
voice vlan Id, used as the Appliance Vlan-Id TLV
scalarInteger32.1.3.6.1.4.1.9.6.1.101.137.7
rlCdpCacheTable
The (conceptual) table contains externtion for the cdpCache table. indexed by cdpCacheEntry.
table-.1.3.6.1.4.1.9.6.1.101.137.8
rlCdpPduAction
Defines CDP packets handling when CDP is globally disabled.
scalarRlCdpPduActionTypes.1.3.6.1.4.1.9.6.1.101.137.9