rldot1dStpLastChanged
CISCOSB-BRIDGEMIBOBJECTS-MIB ·
.1.3.6.1.4.1.9.6.1.101.57.2.12
Object
scalar
SNMPv2-SMITimeTicks
The last time any object in this table was changed by SNMP or other local management means.
Context
- MIB
- CISCOSB-BRIDGEMIBOBJECTS-MIB
- OID
.1.3.6.1.4.1.9.6.1.101.57.2.12- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- rldot1dStp
- Siblings
- 26
Syntax
SNMPv2-SMITimeTicks
- Source
- SNMPv2-SMITimeTicks
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rldot1dStpMibVersion MIB's version, the current version is 2. | scalar | Integer32 | .1.3.6.1.4.1.9.6.1.101.57.2.1 |
| rldot1dStpMonitorTime Factor of hello-time during which a port is monotored to determine if it is stable. | scalar | Integer32 | .1.3.6.1.4.1.9.6.1.101.57.2.10 |
| rldot1dStpBpduCount The number of bpdu that need to received for the link to be considered stable. | scalar | Integer32 | .1.3.6.1.4.1.9.6.1.101.57.2.11 |
| rldot1dStpPortTable A table that contains extended pair port specific information. | table | - | .1.3.6.1.4.1.9.6.1.101.57.2.13 |
| rldot1dStpPortsEnable Enable / Disable spanning tree on ports by default . | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.6.1.101.57.2.14 |
| rldot1dStpTaggedFlooding flooding can be done in tagged bpdu . | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.6.1.101.57.2.15 |
| rldot1dStpPortBelongToVlanDefault The default value of rldot1dStpPortMustBelongToVlan . | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.6.1.101.57.2.16 |
| rldot1dStpEnableByDefault The default value of rldot1dStpEnable . | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.6.1.101.57.2.17 |
| rldot1dStpPortToDefault To order port/s to revert to default setings . | scalar | Integer32 | .1.3.6.1.4.1.9.6.1.101.57.2.18 |
| rldot1dStpSupportedType The type of stp supported by the device. | scalar | Enumeration | .1.3.6.1.4.1.9.6.1.101.57.2.19 |
| rldot1dStpType Specifies whether the device supports Spanning Tree per device,
or per group. | scalar | Enumeration | .1.3.6.1.4.1.9.6.1.101.57.2.2 |
| rldot1dStpEdgeportSupportInStp If EdgePort is supported in stpCompatible mode . | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.6.1.101.57.2.20 |
| rldot1dStpFilterBpdu Specified if the device should filter BPDUs when STP is disabled. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.6.1.101.57.2.21 |
| rldot1dStpFloodBpduMethod Specified flooding method:
1 - classic - untagged to all stp disabled ports
2 - bridging -normal bridging. | scalar | Enumeration | .1.3.6.1.4.1.9.6.1.101.57.2.22 |
| rldot1dStpSeparatedBridges | node | - | .1.3.6.1.4.1.9.6.1.101.57.2.23 |
| rldot1dStpPortBpduGuardTable A table that contains for each port whether it is bpdu guard . | table | - | .1.3.6.1.4.1.9.6.1.101.57.2.24 |
| rldot1dStpLoopbackGuardEnable Define if STP loopback guard feature is globally enabled. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.6.1.101.57.2.25 |
| rldot1dStpDisabledPortStateTable Define stp port state for each stp disabled interface.
This is auxiliary MIB emulates stp enabled port behaviour in ASIC for stp disabled port.
The MIB contains only stp disabled … | table | - | .1.3.6.1.4.1.9.6.1.101.57.2.26 |
| rldot1dStpClearPortCounters Clear the number of bpdu sent and recieved on specific port,
if Value of 0 is specified then clear counters action is applied to all ports,
this object behaviors is write-only, wh… | scalar | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.9.6.1.101.57.2.27 |
| rldot1dStpEnable Enable / Disable spanning tree. When working in per vlan mode
enable / disable STP per all vlans. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.6.1.101.57.2.3 |
| rldot1dStpPortMustBelongToVlan Specifies whether a port must belong to a VLAN in order
to participate in the STP. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.6.1.101.57.2.4 |
| rldot1dStpExtendedPortNumberFormat Specifies whether the STP uses the extended port fnumber format. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.6.1.101.57.2.5 |
| rldot1dStpVlanTable A table that contains vlan-specific information
for the Spanning Tree Protocol. | table | - | .1.3.6.1.4.1.9.6.1.101.57.2.6 |
| rldot1dStpVlanPortTable A table that contains pair <vlan, port> specific information
for the Spanning Tree Protocol. | table | - | .1.3.6.1.4.1.9.6.1.101.57.2.7 |
| rldot1dStpTrapVariable | node | - | .1.3.6.1.4.1.9.6.1.101.57.2.8 |
| rldot1dStpTypeAfterReset New mode of spaning tree supported by the device after the next reset. | scalar | Enumeration | .1.3.6.1.4.1.9.6.1.101.57.2.9 |