vismRtpPktPeriod

CISCO-WAN-RTP-CONN-MIB · .1.3.6.1.4.1.351.150.20.1.1.1.1.9

Object

column r/w Enumeration

This object gives the packetization period for a
particular codec in milli secs.
   for  G.711a  allowed values are  10 & 20
   for  G.711u  allowed values are 10 & 20
   for  G.726 at rate 32 kbps allowed values
        are 10 ,20 30 & 40
   for  G.729a   allowed values are 10, 20 ,30 & 40
   for  G.729ab  allowed values are 10, 20, 30 & 40
   for  clear channel allowed values are 10 and 20
   for  G.726 at rate 16 kbps allowed values
        are 10 ,20 30 & 40   
   for  G.726 at rate 24 kbps allowed values
        are 10 ,20 30 & 40
   for  G.726 at rate 40 kbps allowed values
        are 10 ,20 30 & 40
   for  G.723 family allowed values are
        30 & 60. Default is 30.
   for  Lossless allowed values are 10 and 20

Context

MIB: CISCO-WAN-RTP-CONN-MIB
OID: .1.3.6.1.4.1.351.150.20.1.1.1.1.9
Type: column
Access: readwrite
Status: current
Parent: vismRtpConnGrpEntry
Table: vismRtpConnGrpTable
Siblings: 20

Syntax

Enumeration

Values & Constraints

Enumerated Values

`10`	tenms
`20`	twentyms
`30`	thirtyms
`40`	fourtyms
`60`	sixtyms

Related Objects

Sibling Objects

Object	Type	Syntax	OID
vismRtpConnNum This is the connection number in vismRtpConnGrpTable.	column	Integer32	`.1.3.6.1.4.1.351.150.20.1.1.1.1.1`
vismRtpVadTimer This attribute defines the hangover time for VAD (Voice Activity Detection) in milliseconds. Once the voice inactivity is detected, the gateway will wait for this duration before …	column	Integer32	`.1.3.6.1.4.1.351.150.20.1.1.1.1.10`
vismRtpEcanEnable This attribute defines whether Echo Cancellation has to be enabled on this connection. If it is set to 'true(1)', echo cancellation is enabled. If it is set to 'false(2)', echo ca…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.351.150.20.1.1.1.1.11`
vismRtpTriRedundancy This object tells whether the packets need to be sent in triplicates or not. If it is set to 'true(1)' the packets will be sent three times else will only be sent once (this is us…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.351.150.20.1.1.1.1.12`
vismRtpDtmfTransport This attribute defines whether the DTMF (Dual Tone Multi Frequency) digits need to be transported to the other end-point.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.351.150.20.1.1.1.1.13`
vismRtpCasTransport This attribute defines whether the CAS(Channel Associated Signaling) bits need to be transported to the other endpoint. In the case of switching application, the CAS bits are bac…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.351.150.20.1.1.1.1.14`
vismRtpVad This attribute defines whether the VAD has to be applied on this channel, upon detection of silence. For algorithms that do not have VAD standards, Cisco-proprietary VAD can be ap…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.351.150.20.1.1.1.1.15`
vismRtpICSEnable This attribute is used to enable or disable the ICS(Idle Channel Suppression) for a connection. This can be specified while adding the connection and cannot be modified. …	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.351.150.20.1.1.1.1.16`
vismRtpConnAlarmState This attribute shows the alarm state of this connection. It is set to 'failed' if the connection is in alarm else will be set to 'active'.	column	Enumeration	`.1.3.6.1.4.1.351.150.20.1.1.1.1.17`
vismRtpRowStatus This object is used to create, modify or delete an entry. An entry can be created using the 'createAndGo' option. Before creating a RTP connection, the endpoint sho…	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.351.150.20.1.1.1.1.18`
vismRtpLcn This object is used to indicate the RTP related LCN (Logical channel number). Only the primary PVC (Permanent virtual circuit) is used for this object.	column	Integer32	`.1.3.6.1.4.1.351.150.20.1.1.1.1.19`
vismRtpEndptNum This object defines the endpoint number to which the RTP connection associated. It is the same as mgEndpointNumber object in mgEndpointTable(defined in CISCO-WAN-MG-MIB MIB).	column	Integer32	`.1.3.6.1.4.1.351.150.20.1.1.1.1.2`
vismRtpFailReason This object is used to indicate the RTP failure reason. 'self' : fail because of non-PVC alarm. 'highLevel' : fail because of PVC alarm. 'both' : fail because of both PV…	column	Enumeration	`.1.3.6.1.4.1.351.150.20.1.1.1.1.20`
vismRtpPayloadType This object specifies the payload type to be used, when adding connection(s) in VoIP Trunking. IANA (Internet assigned number Authority) values (0..95) are static p…	column	Integer32	`.1.3.6.1.4.1.351.150.20.1.1.1.1.21`
vismRtpLocPort This object determines the static local RTP port (UDP) that this connection is using. Only even numbers are allowed as odd numbers are used for RTCP(Real-time transport control pr…	column	Integer32	`.1.3.6.1.4.1.351.150.20.1.1.1.1.3`
vismRtpRmtIp This object determines the remote VISM's IP address. For every RTP connection the remote port and remote IP pair needs to be unique.	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.351.150.20.1.1.1.1.4`
vismRtpRmtPort This object determines the static remote RTP port (UDP) that this connection is using. Only even numbers are allowed as odd numbers are used for RTCP port. The combination of remo…	column	Integer32	`.1.3.6.1.4.1.351.150.20.1.1.1.1.5`
vismRtpConnMode This object defines the packet transfer mode on the connection. 'sendOnly' - indicate send packet only. 'rcvOnly' - indicate receive packet only. 'sendAndRcv' - indicate send an…	column	Enumeration	`.1.3.6.1.4.1.351.150.20.1.1.1.1.6`
vismRtpBearerTos This object is used to provision the bitmask used for the Type Of Service (TOS) octet for cells carrying VoIP bearer (RTP) traffic. The first 3 bits denotes the precedence while t…	column	Integer32	`.1.3.6.1.4.1.351.150.20.1.1.1.1.7`
vismRtpCodecType This object is used to define what codec is used to transport voice packets on a RTP connection. 1 represents G.711u 2 represents G.711a 3 represents G.726 at rate 32 kb…	column	Enumeration	`.1.3.6.1.4.1.351.150.20.1.1.1.1.8`