bearerAal2ExtAISCnts
CISCO-VISM-ATM-TRUNK-MIB ·
.1.3.6.1.4.1.351.110.5.5.9.1.1.11
Object
column
SNMPv2-SMICounter32
This object contains the number of external AIS
(Alarm Indication Signal) AAL2 Type3 packets received.
External AIS - is associated with a maintenance alarm
detected on a defective maintenance span, that is
transmitted in the direction of the defect as a substitute
for normal signal. The purpose is to show the downstream
entities that a defect has been identified and to prevent
other maintenance alrams consequent to this first defect.
External AIS bit stream is represented by an all 1's
signal.
Context
- MIB
- CISCO-VISM-ATM-TRUNK-MIB
- OID
.1.3.6.1.4.1.351.110.5.5.9.1.1.11- Type
- column
- Access
- readonly
- Status
- current
- Parent
- bearerConnEntry
- Table
- bearerConnTable
- Siblings
- 24
Syntax
SNMPv2-SMICounter32
- Source
- SNMPv2-SMICounter32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| bearerEndptNum This attribute defines the index for the Bearer
Connection Table. This refers to the same value
as the index to the mgEndpointTable ie. mgEndpointNumber.
This is define in CISCO… | column | Integer32 | .1.3.6.1.4.1.351.110.5.5.9.1.1.1 |
| bearerLatency This attribute defines the latency (a.k.a end-to-end average
transmission delay for a voice packet). | column | milliseconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.351.110.5.5.9.1.1.10 |
| bearerAal2ExtRAICnts This object contains the number of external RAI
(Remote Alarm Indication) AAL2 Type3 packets received.
External RAI - is a signal that is transmitted
upstream from… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.351.110.5.5.9.1.1.12 |
| bearerAal2ConnAISCnts This object contains the number of external Conn
AIS AAL2 Type2 packets received.
External Conn AIS - is transmitted in the downstream
direction from the AAL Typ… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.351.110.5.5.9.1.1.13 |
| bearerAal2ConnRDICnts This object contains the number of external Conn
RDI(Remote Defect Indication) AAL2 Type2 packets
received.
External Conn RDI - is a signal transmitted upstream … | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.351.110.5.5.9.1.1.14 |
| bearerCntClrButton This object is used to clear bearerSentPkts, bearerRcvdPkts,
bearerSentOctets, and bearerRcvdOctets. | column | Enumeration | .1.3.6.1.4.1.351.110.5.5.9.1.1.15 |
| bearerPeakXmtCellRate Peak transmit ATM cell rate is the ATM cells
required to transmit peak AAL2 packets on a
CID per second since midnight as per system time;
the peak cell rate gets cleared every… | column | cells-per-second Unsigned32 | .1.3.6.1.4.1.351.110.5.5.9.1.1.16 |
| bearerCurrentXmtCellRate Current transmit ATM cell rate is the ATM cells
required to transmit current AAL2 packets on a
CID per second. | column | cells-per-second Unsigned32 | .1.3.6.1.4.1.351.110.5.5.9.1.1.17 |
| bearerPeakRcvCellRate Peak receive ATM cell rate is the ATM cells
required to receive peak AAL2 packets on a
CID per second since midnight as per system time;
the peak cell rate gets cleared every 2… | column | cells-per-second Unsigned32 | .1.3.6.1.4.1.351.110.5.5.9.1.1.18 |
| bearerCurrentRcvCellRate Current receive ATM cell rate is the ATM cells
required to receive current AAL2 packets on a
CID per second. | column | cells-per-second Unsigned32 | .1.3.6.1.4.1.351.110.5.5.9.1.1.19 |
| bearerCid This attribute defines the CID associated with this
bearer connection. This refers to the same value as
vismAal2CidNum in the vismAal2CidCnfTable. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.351.110.5.5.9.1.1.2 |
| bearerCurrentExtAISRcvCnts This object contains the count of external
AIS AAL2 (Type 2) received on this
bearerEndptNum since its creation. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.351.110.5.5.9.1.1.20 |
| bearerCurrentExtRAIRcvCnts This object contains the number of external
RAI AAL2 (Type 2) received in this bearerEndptNum
since its creation. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.351.110.5.5.9.1.1.21 |
| bearerCurrentConnAISCnts This object contains count of external Connection
AIS AAL2 (Type 2) received in this bearerEndptNum
since its creation. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.351.110.5.5.9.1.1.22 |
| bearerCurrentConnRDICnts This object contains the count of external Connection
RDI (Remote Defect Indication) AAL2 (Type 2) received
in this bearerEndptNum since its creation. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.351.110.5.5.9.1.1.23 |
| bearerCurrentExtAISXmtCnts This object contains the count of external AIS
AAL2 (Type 2) transmitted in this bearerEndptNum
since its creation. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.351.110.5.5.9.1.1.24 |
| bearerCurrentExtRAIXmtCnts This object contains the count of external
RAI AAL2 (Type 2) transmitted in this bearerEndptNum
since its creation. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.351.110.5.5.9.1.1.25 |
| bearerLcn This attribute defines the PVC or LCN(Logical Channel Number)
number to which this bearer connection is associated with.
This refers to the same value as in vismCnfChanNum in
vis… | column | Integer32 | .1.3.6.1.4.1.351.110.5.5.9.1.1.3 |
| bearerSentPkts This attribute defines the count of packets sent towards the
network since this connection setup. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.351.110.5.5.9.1.1.4 |
| bearerRcvdPkts This attribute defines the count of packets received from the
network since this connection setup. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.351.110.5.5.9.1.1.5 |
| bearerSentOctets This attribute defines the count of bytes sent towards the
network since this connection setup. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.351.110.5.5.9.1.1.6 |
| bearerRcvdOctets This attribute defines the count of bytes received from the
network since this connection setup. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.351.110.5.5.9.1.1.7 |
| bearerLostPkts This attribute defines the count of packets lost in the
egress direction (from the network). This is a computed
number based on the expected number of packets and the
actual numbe… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.351.110.5.5.9.1.1.8 |
| bearerJitter This attribute defines the jitter (a.k.a interarrival jitter)
This value is determined by the DSP(Digital Signal
Processing) and obtained by the HOST processor
upon querying the … | column | milliseconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.351.110.5.5.9.1.1.9 |