ctsxSxpRetryPeriod
CISCO-TRUSTSEC-SXP-MIB ·
.1.3.6.1.4.1.9.9.720.1.1.8
Object
This object specifies the amount of time after which the device
will make the retry attempt for the SXP connections that are not
setup successfully.
A value of zero for this object indicates that the device will
never try to establish connections that were not setup
successfully.
Context
- MIB
- CISCO-TRUSTSEC-SXP-MIB
- OID
.1.3.6.1.4.1.9.9.720.1.1.8- Type
- scalar
- Access
- readwrite
- Status
- current
- Units
- seconds
- Parent
- ctsxSxpGlobalObjects
- Siblings
- 20
Syntax
seconds SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ctsxSxpEnable This object specifies if the SXP (Security Group Tag Exchange
Protocol) functionality is enabled on the device. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.720.1.1.1 |
| ctsxSxpBindingChangesLogEnable This object specifies if the system will generate system
logging messages for SXP binding changes.
A value of 'false' will prevent system from generating
logging messa… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.720.1.1.10 |
| ctsxSgtMapExpansionLimit This object specifies the maximum number of SGT
mapping entries that can be expanded on the system.
Value of zero for this object indicates that SGT mapping
expansion f… | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.720.1.1.11 |
| ctsxSgtMapExpansionCount This object indicates the number of SGT mapping
entries currently expanded on the system. | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.720.1.1.12 |
| ctsxSxpAdminNodeId This object specifies the administrative SXP node ID for
this system.
Setting this object to a non-zero value will clear the values
in ctsxSxpNodeIdInterface and ctsxSx… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.720.1.1.13 |
| ctsxSxpNodeIdInterface This object specifies the interface to be used to select
SXP node ID.
Setting this object to a non-zero value will clear the values
in ctsxSxpAdminNodeId and ctsxSxpNod… | scalar | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.9.9.720.1.1.14 |
| ctsxSxpNodeIdIpAddrType This object specifies the type of Internet address to be
used to select the SXP node ID. | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.720.1.1.15 |
| ctsxSxpNodeIdIpAddr This object specifies the Internet address to be used to
select the SXP node ID.
The type of this address is determined by
ctsxSxpOperNodeIdIpAddrType object.
… | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.720.1.1.16 |
| ctsxSxpOperNodeId This object indicates the operational SXP node ID of
the system. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.720.1.1.17 |
| ctsxSxpSpeakerMinHoldTime This object specifies the global minimum hold-time for SXP
connections in 'speaker' mode. | scalar | seconds Unsigned32 | .1.3.6.1.4.1.9.9.720.1.1.18 |
| ctsxSxpListenerMinHoldTime This object specifies the global minimum hold-time for
SXP connections in 'listener' mode.
Value of this object must be lesser than
ctsxSxpListenerMaxHoldTime. | scalar | seconds Unsigned32 | .1.3.6.1.4.1.9.9.720.1.1.19 |
| ctsxSxpConfigDefaultPasswordType This object specifies the type of encryption used
to configure ctsxSxpConfigDefaultPassword string.
When read, this object will always return 'other'.
Value … | scalar | CISCO-TRUSTSEC-TC-MIBCtsPasswordEncryptionType | .1.3.6.1.4.1.9.9.720.1.1.2 |
| ctsxSxpListenerMaxHoldTime This object specifies the global maximum hold-time for
SXP connections in 'listener' mode.
Value of this object must be greater than
ctsxSxpListenerMinHoldTime. | scalar | seconds Unsigned32 | .1.3.6.1.4.1.9.9.720.1.1.20 |
| ctsxSxpVersionSupport The highest version of SXP protocol that this device supports.
'unknown' - The SXP protocol version capability for the
device is unknown.
'one' … | scalar | Enumeration | .1.3.6.1.4.1.9.9.720.1.1.21 |
| ctsxSxpConfigDefaultPassword This object specifies the default password for SXP
connections.
The type of encryption used to configure this password
is determined by ctsxSxpConfigDefaultPasswordTyp… | scalar | CISCO-TRUSTSEC-TC-MIBCtsPassword | .1.3.6.1.4.1.9.9.720.1.1.3 |
| ctsxSxpViewDefaultPasswordType This object indicates the type of encryption in use
for ctsxSxpViewDefaultPassword. | scalar | CISCO-TRUSTSEC-TC-MIBCtsPasswordEncryptionType | .1.3.6.1.4.1.9.9.720.1.1.4 |
| ctsxSxpViewDefaultPassword This object indicates the default password for SXP connections.
The type of encryption used to display this password is
determined by the object ctsxSxpViewDefaultPass… | scalar | CISCO-TRUSTSEC-TC-MIBCtsPassword | .1.3.6.1.4.1.9.9.720.1.1.5 |
| ctsxSxpDefaultSourceAddrType The type of Internet address of the default source address
for SXP connections. | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.720.1.1.6 |
| ctsxSxpDefaultSourceAddr The Internet address to be used as default source address for
SXP connections. The type of this address is determined by the
ctsxSxpDefaultSourceAddrType object.
This a… | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.720.1.1.7 |
| ctsxSxpReconPeriod This object specifies the amount of time after which system
will initiate removal of SGT mappings for a reconciled
connection.
A value of zero for this object indicates… | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.720.1.1.9 |