ctsxSxpConnConfigPassword
CISCO-TRUSTSEC-SXP-MIB ·
.1.3.6.1.4.1.9.9.720.1.2.1.1.10
Object
This object is used to specify the password for this
connection.
The type of encryption used to configure this password
is determined by ctsxSxpConnConfigPasswordType.
When read, this object will always return a zero length string.
A non zero length password must be specified for this object if
the value of ctsxSxpConnConfigPasswordType is other than 'none'
or 'other'.
A value for this object may not be specified if the value of
ctsxSxpConnPasswordUsed is other than 'connectionSpecific'.
The purpose of this object is to only allow configuration of
the password. The ctsxSxpConnViewPassword object is used to
display the password.
Context
- MIB
- CISCO-TRUSTSEC-SXP-MIB
- OID
.1.3.6.1.4.1.9.9.720.1.2.1.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ctsxSxpConnectionEntry
- Table
- ctsxSxpConnectionTable
- Siblings
- 27
Syntax
CISCO-TRUSTSEC-TC-MIBCtsPassword
- Source
- CISCO-TRUSTSEC-TC-MIBCtsPassword
- Base type
OctetString
Values & Constraints
Type Constraints
range: 0..256
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ctsxSxpConnVrfName The name of the Virtual Routing and Forwarding (VRF) table
associated with this SXP connection.
A zero length string implies that connection will be setup
in the de… | column | CISCO-TCCiscoVrfName | .1.3.6.1.4.1.9.9.720.1.2.1.1.1 |
| ctsxSxpConnViewPasswordType This object indicates the type of encryption in use
for ctsxSxpConnViewPassword. | column | CISCO-TRUSTSEC-TC-MIBCtsPasswordEncryptionType | .1.3.6.1.4.1.9.9.720.1.2.1.1.11 |
| ctsxSxpConnViewPassword This object indicates the password associated with this
connection.
The type of encryption used to display this password is
determined by the object ctsxSxpConnVie… | column | CISCO-TRUSTSEC-TC-MIBCtsPassword | .1.3.6.1.4.1.9.9.720.1.2.1.1.12 |
| ctsxSxpConnModeLocation This object specifies if ctsxSxpConnMode is applicable
for local or the peer device.
A value of 'local' indicates that ctsxSxpConnMode applies to
the local device … | column | Enumeration | .1.3.6.1.4.1.9.9.720.1.2.1.1.13 |
| ctsxSxpConnMode This object specifies the device mode of this SXP connection.
A value of 'speaker' indicates that device will acts as
the speaker in this SXP connection.
… | column | Enumeration | .1.3.6.1.4.1.9.9.720.1.2.1.1.14 |
| ctsxSxpConnInstance This object indicates the instance number associated
with this SXP connection.
The instance number is used to identify stale SGT
mappings which need to be removed f… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.720.1.2.1.1.15 |
| ctsxSxpConnStatusLastChange The amount of time elapsed since change in status of this SXP
connection. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.720.1.2.1.1.16 |
| ctsxSxpConnStatus This object indicates the status of this SXP connection.
When the corresponding instance value of ctsxSxpConnMode
is 'both', this object indicates the status of 'sp… | column | CISCO-TRUSTSEC-TC-MIBCtsSxpConnectionStatus | .1.3.6.1.4.1.9.9.720.1.2.1.1.17 |
| ctsxSxpVrfId The numerical identifier associated with ctsxSxpConnVrfName. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.720.1.2.1.1.18 |
| ctsxSxpConnStorageType The storage type of this conceptual row. | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.9.9.720.1.2.1.1.19 |
| ctsxSxpConnPeerAddrType The type of Internet address of the peer SXP device. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.720.1.2.1.1.2 |
| ctsxSxpConnRowStatus The status of this conceptual row.
Once a row becomes active, only the value in
ctsxSxpConnModeLocation, ctsxSxpConnMode
ctsxSxpConnSpeakerMinHoldTime, ctsxSxpConnL… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.720.1.2.1.1.20 |
| ctsxSxpConnVersion The version of SXP protocol in use for this connection.
'unknown' - Version of SXP protocol for this connection
is unknown.
'one' - Connection is using version 1… | column | Enumeration | .1.3.6.1.4.1.9.9.720.1.2.1.1.21 |
| ctsxSxpConnSpeakerMinHoldTime This object specifies the minimum hold-time for this SXP
connection when the device is acting as 'speaker'.
Setting the object to zero indicates that the global val… | column | seconds Unsigned32 | .1.3.6.1.4.1.9.9.720.1.2.1.1.22 |
| ctsxSxpConnListenerMinHoldTime This object specifies the minimum hold-time for this SXP
connection when the device is acting as 'listener'.
Value of this object must be lesser than
ctsxSxpConnLis… | column | seconds Unsigned32 | .1.3.6.1.4.1.9.9.720.1.2.1.1.23 |
| ctsxSxpConnListenerMaxHoldTime This object specifies the maximum hold-time for this SXP
connection when the device is acting as 'listener'.
Value of this object must be greater than
ctsxSxpConnLi… | column | seconds Unsigned32 | .1.3.6.1.4.1.9.9.720.1.2.1.1.24 |
| ctsxSxpConnHoldTime This object indicates the hold-time in use for this
SXP connection.
A value of 0 indicates that hold-time functionality has been
disabled for this connection.
… | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.720.1.2.1.1.25 |
| ctsxSxpConnCapability This object indicates the capability of SXP connection. | column | Bits | .1.3.6.1.4.1.9.9.720.1.2.1.1.26 |
| ctsxSxpConnBiDirListenerStatus This object indicates the status of 'listener'
for this Bi-directional SXP connection.
Value of this object should be ignored if the corresponding
instance value of… | column | CISCO-TRUSTSEC-TC-MIBCtsSxpConnectionStatus | .1.3.6.1.4.1.9.9.720.1.2.1.1.27 |
| ctsxSxpConnBiDirListenerHoldTime This object indicates the hold-time in use by the listener
for this Bi-directional SXP connection.
Value of this object should be ignored if the corresponding
insta… | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.720.1.2.1.1.28 |
| ctsxSxpConnPeerAddr The Internet address of the SXP peer device. The type of this
address is determined by the value of ctsxSxpConnPeerAddrType
object. | column | OctetString | .1.3.6.1.4.1.9.9.720.1.2.1.1.3 |
| ctsxSxpConnSourceAddrType The type of source Internet address that is configured
for this SXP connection. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.720.1.2.1.1.4 |
| ctsxSxpConnSourceAddr The source Internet address configured for this SXP connection.
The type of this address is determined by the value
of ctsxSxpConnSourceAddrType object.
When specif… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.720.1.2.1.1.5 |
| ctsxSxpConnOperSourceAddrType The type of source Internet address that is in
in use for this SXP connection. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.720.1.2.1.1.6 |
| ctsxSxpConnOperSourceAddr The source Internet address that is in use for
this SXP connection.
The type of this address is determined by the value
of ctsxSxpConnSourceAddrType object. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.720.1.2.1.1.7 |
| ctsxSxpConnPasswordUsed This object specifies the type of password to be used for this
SXP connection.
'none' - No password required for the SXP connection.
'default' - … | column | Enumeration | .1.3.6.1.4.1.9.9.720.1.2.1.1.8 |
| ctsxSxpConnConfigPasswordType This object specifies the type of encryption used
to configure ctsxSxpConnConfigPassword string.
When read, this object will always return 'other'.
… | column | CISCO-TRUSTSEC-TC-MIBCtsPasswordEncryptionType | .1.3.6.1.4.1.9.9.720.1.2.1.1.9 |