cseStaticExtRouterTable
CISCO-SWITCH-ENGINE-MIB ·
.1.3.6.1.4.1.9.9.97.1.2.5
Object
table
A table of external routers which are enabled for Layer 3 IP switching by the switching engine. This table may contain routers that have not yet been discovered by the device.
Context
- MIB
- CISCO-SWITCH-ENGINE-MIB
- OID
.1.3.6.1.4.1.9.9.97.1.2.5- Type
- table
- Status
- current
- Parent
- cseFlow
- Siblings
- 25
- Children
- 1
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cseFlowEstablishedAgingTime The adminstrative aging time for IP established flows.
The default value for this object is implementation specific.
If the cseFlowEstablishedAgingTime is not configured to the
ap… | scalar | seconds Integer32 | .1.3.6.1.4.1.9.9.97.1.2.1 |
| cseFlowSwitchControlTable A table used to control the L3 flow switching operation, per
protocol type. | table | - | .1.3.6.1.4.1.9.9.97.1.2.10 |
| cseFlowMcastMaxQueries Maximum number of query entries allowed to be outstanding
at any time, in the cseFlowMcastQueryTable. The typical value
for this object is 5. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.97.1.2.11 |
| cseFlowMcastQueryTable A control table used to query the switching engine by
specifying retrieval criteria for IP multicast L3 flows.
Each row instance in the table represents a query with
its parameter… | table | - | .1.3.6.1.4.1.9.9.97.1.2.12 |
| cseFlowMcastResultTable A table containing current IP multicast flow information
corresponding to all the completed queries set up in
the cseFlowMcastQueryTable, that were initiated on the switch
engine(… | table | - | .1.3.6.1.4.1.9.9.97.1.2.13 |
| cseFlowMcastSwitchStatus The current status of the global IP multicast flow switching
capability. When enabled, the switch engine will be able to
install multicast flow entries in its L3 forwarding table… | scalar | ControlStatus | .1.3.6.1.4.1.9.9.97.1.2.14 |
| cseFlowIPXEstablishedAgingTime The administrative aging time for established IPX flows. The
default value for this object is implementation specific.
The corresponding operational object is
cseFlowOperIPXAgingT… | scalar | seconds Integer32 | .1.3.6.1.4.1.9.9.97.1.2.15 |
| cseStaticIpxExtRouterTable A table of external routers which are enabled for
Layer 3 IPX switching by the switching engine.
This table may contain routers
that have not yet been discovered by the device. | table | - | .1.3.6.1.4.1.9.9.97.1.2.16 |
| cseFlowOperEstablishedAgingTime The operational aging time for IP established flows. | scalar | seconds Integer32 | .1.3.6.1.4.1.9.9.97.1.2.17 |
| cseFlowOperFastAgingTime The operational fast aging time for the established flow
entries, that have less number of packets than the value set
in the cseFlowOperFastAgePktThreshold,switched within this
t… | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.97.1.2.18 |
| cseFlowOperFastAgePktThreshold The operational packet threshold for the
cseFlowOperFastAgingTime. | scalar | packets SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.97.1.2.19 |
| cseFlowFastAgingTime The administrative fast aging time for the established flow
entries, that have less number of packets than the value set in
the cseFlowFastAgePktThreshold, switched within this t… | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.97.1.2.2 |
| cseFlowOperIPXAgingTime The operational aging time for established IPX flows. | scalar | seconds Integer32 | .1.3.6.1.4.1.9.9.97.1.2.20 |
| cseBridgedFlowStatsCtrlTable A table controls the reporting of intra-vlan statistics
for bridged flow per vlan. When a vlan is created in
a device supporting this table, a corresponding entry
of this table wi… | table | - | .1.3.6.1.4.1.9.9.97.1.2.21 |
| cseFlowIPFlowMask Indicates the flow mask for IP flows.
If dstOnly(1) is used, it enables flows based on Layer 3
destination addresses only.
If srcDst(2) is used, it enables f… | scalar | Enumeration | .1.3.6.1.4.1.9.9.97.1.2.22 |
| cseFlowIPXFlowMask Indicates the flow mask for IPX flows.
If dstOnly(1) is used, it enables flows based on Layer 3
destination addresses only.
If srcDst(2) is used, it enables … | scalar | Enumeration | .1.3.6.1.4.1.9.9.97.1.2.23 |
| cseFlowLongAgingTime The administrative long aging time for the established
flow entries. Setting to value of 0 turns off long aging. | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.97.1.2.24 |
| cseFlowExcludeTable A table controls the flow creation based on protocol
and port number. If a packet matches the protocol and
port number specified in this table entries, a flow
entry will not be es… | table | - | .1.3.6.1.4.1.9.9.97.1.2.25 |
| cseFlowStatsTable A table containing flow statistics information on each switching
engine. | table | - | .1.3.6.1.4.1.9.9.97.1.2.26 |
| cseFlowFastAgePktThreshold The administrative packet threshold setting for the
cseFlowFastAgingTime. The default for Fast Aging Packet
Threshold is 0, i.e. no packets switched within the time
set in cseFlow… | scalar | packets SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.97.1.2.3 |
| cseRouterTable A table containing information about all routers that are
discovered by the switch, including internal and external
routers. | table | - | .1.3.6.1.4.1.9.9.97.1.2.4 |
| cseRouterVlanTable The table listing the MAC address used by routers on
particular VLANs. | table | - | .1.3.6.1.4.1.9.9.97.1.2.6 |
| cseFlowMaxQueries Maximum number of query entries allowed to be outstanding at
any time, in the cseFlowQueryTable. The typical value for
this object is 5. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.97.1.2.7 |
| cseFlowQueryTable A control table used to query the switching engine by
specifying retrieval criteria for L3 flows.
The resulting data for each instance of a query in this
table is returned in the … | table | - | .1.3.6.1.4.1.9.9.97.1.2.8 |
| cseFlowDataTable A table containing L3 flow information corresponding to all
the completed queries setup in the cseFlowQueryTable, that were
initiated on the switch engine(s). | table | - | .1.3.6.1.4.1.9.9.97.1.2.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cseStaticExtRouterEntry A conceptual row in the cseStaticExtRouterTable for
enabling an external router to be installed in the switch's
router table. The entry is created and deleted by using
cseStaticR… | row | - | .1.3.6.1.4.1.9.9.97.1.2.5.1 |