cseFlowSwitchControlTable

CISCO-SWITCH-ENGINE-MIB · .1.3.6.1.4.1.9.9.97.1.2.10

Object

table

A table used to control the L3 flow switching operation, per
protocol type.

Context

MIB: CISCO-SWITCH-ENGINE-MIB
OID: .1.3.6.1.4.1.9.9.97.1.2.10
Type: table
Status: current
Parent: cseFlow
Siblings: 25
Children: 1

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
cseFlowEstablishedAgingTime The adminstrative aging time for IP established flows. The default value for this object is implementation specific. If the cseFlowEstablishedAgingTime is not configured to the ap…	scalar	seconds Integer32	`.1.3.6.1.4.1.9.9.97.1.2.1`
cseFlowMcastMaxQueries Maximum number of query entries allowed to be outstanding at any time, in the cseFlowMcastQueryTable. The typical value for this object is 5.	scalar	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.9.9.97.1.2.11`
cseFlowMcastQueryTable A control table used to query the switching engine by specifying retrieval criteria for IP multicast L3 flows. Each row instance in the table represents a query with its parameter…	table	-	`.1.3.6.1.4.1.9.9.97.1.2.12`
cseFlowMcastResultTable A table containing current IP multicast flow information corresponding to all the completed queries set up in the cseFlowMcastQueryTable, that were initiated on the switch engine(…	table	-	`.1.3.6.1.4.1.9.9.97.1.2.13`
cseFlowMcastSwitchStatus The current status of the global IP multicast flow switching capability. When enabled, the switch engine will be able to install multicast flow entries in its L3 forwarding table…	scalar	ControlStatus	`.1.3.6.1.4.1.9.9.97.1.2.14`
cseFlowIPXEstablishedAgingTime The administrative aging time for established IPX flows. The default value for this object is implementation specific. The corresponding operational object is cseFlowOperIPXAgingT…	scalar	seconds Integer32	`.1.3.6.1.4.1.9.9.97.1.2.15`
cseStaticIpxExtRouterTable A table of external routers which are enabled for Layer 3 IPX switching by the switching engine. This table may contain routers that have not yet been discovered by the device.	table	-	`.1.3.6.1.4.1.9.9.97.1.2.16`
cseFlowOperEstablishedAgingTime The operational aging time for IP established flows.	scalar	seconds Integer32	`.1.3.6.1.4.1.9.9.97.1.2.17`
cseFlowOperFastAgingTime The operational fast aging time for the established flow entries, that have less number of packets than the value set in the cseFlowOperFastAgePktThreshold,switched within this t…	scalar	seconds SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.9.9.97.1.2.18`
cseFlowOperFastAgePktThreshold The operational packet threshold for the cseFlowOperFastAgingTime.	scalar	packets SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.9.9.97.1.2.19`
cseFlowFastAgingTime The administrative fast aging time for the established flow entries, that have less number of packets than the value set in the cseFlowFastAgePktThreshold, switched within this t…	scalar	seconds SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.9.9.97.1.2.2`
cseFlowOperIPXAgingTime The operational aging time for established IPX flows.	scalar	seconds Integer32	`.1.3.6.1.4.1.9.9.97.1.2.20`
cseBridgedFlowStatsCtrlTable A table controls the reporting of intra-vlan statistics for bridged flow per vlan. When a vlan is created in a device supporting this table, a corresponding entry of this table wi…	table	-	`.1.3.6.1.4.1.9.9.97.1.2.21`
cseFlowIPFlowMask Indicates the flow mask for IP flows. If dstOnly(1) is used, it enables flows based on Layer 3 destination addresses only. If srcDst(2) is used, it enables f…	scalar	Enumeration	`.1.3.6.1.4.1.9.9.97.1.2.22`
cseFlowIPXFlowMask Indicates the flow mask for IPX flows. If dstOnly(1) is used, it enables flows based on Layer 3 destination addresses only. If srcDst(2) is used, it enables …	scalar	Enumeration	`.1.3.6.1.4.1.9.9.97.1.2.23`
cseFlowLongAgingTime The administrative long aging time for the established flow entries. Setting to value of 0 turns off long aging.	scalar	seconds SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.9.9.97.1.2.24`
cseFlowExcludeTable A table controls the flow creation based on protocol and port number. If a packet matches the protocol and port number specified in this table entries, a flow entry will not be es…	table	-	`.1.3.6.1.4.1.9.9.97.1.2.25`
cseFlowStatsTable A table containing flow statistics information on each switching engine.	table	-	`.1.3.6.1.4.1.9.9.97.1.2.26`
cseFlowFastAgePktThreshold The administrative packet threshold setting for the cseFlowFastAgingTime. The default for Fast Aging Packet Threshold is 0, i.e. no packets switched within the time set in cseFlow…	scalar	packets SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.9.9.97.1.2.3`
cseRouterTable A table containing information about all routers that are discovered by the switch, including internal and external routers.	table	-	`.1.3.6.1.4.1.9.9.97.1.2.4`
cseStaticExtRouterTable A table of external routers which are enabled for Layer 3 IP switching by the switching engine. This table may contain routers that have not yet been discovered by the device.	table	-	`.1.3.6.1.4.1.9.9.97.1.2.5`
cseRouterVlanTable The table listing the MAC address used by routers on particular VLANs.	table	-	`.1.3.6.1.4.1.9.9.97.1.2.6`
cseFlowMaxQueries Maximum number of query entries allowed to be outstanding at any time, in the cseFlowQueryTable. The typical value for this object is 5.	scalar	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.9.9.97.1.2.7`
cseFlowQueryTable A control table used to query the switching engine by specifying retrieval criteria for L3 flows. The resulting data for each instance of a query in this table is returned in the …	table	-	`.1.3.6.1.4.1.9.9.97.1.2.8`
cseFlowDataTable A table containing L3 flow information corresponding to all the completed queries setup in the cseFlowQueryTable, that were initiated on the switch engine(s).	table	-	`.1.3.6.1.4.1.9.9.97.1.2.9`

Child Objects