cseFlowQueryDestination
CISCO-SWITCH-ENGINE-MIB ·
.1.3.6.1.4.1.9.9.97.1.2.8.1.6
Object
column
r/w
FlowAddressComponent
The destination network address and port (if applicable). The value of this object cannot be modified when the corresponding instance of cseFlowQueryStatus is 'active'.
Context
- MIB
- CISCO-SWITCH-ENGINE-MIB
- OID
.1.3.6.1.4.1.9.9.97.1.2.8.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cseFlowQueryEntry
- Table
- cseFlowQueryTable
- Siblings
- 17
Syntax
FlowAddressComponent
- Source
- FlowAddressComponent
- Base type
OctetString
Values & Constraints
Type Constraints
range: 6
range: 10
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cseFlowQueryIndex An arbitrary integer which uniquely identifies the control
query among all those specified for the switching engine
indicated by entPhysicalIndex. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.97.1.2.8.1.1 |
| cseFlowQueryResultingRows The result status of the query. Possible values are:
-1 - Either the query has not been initiated or
the agent is busy processing this q… | column | Integer32 | .1.3.6.1.4.1.9.9.97.1.2.8.1.10 |
| cseFlowQueryResultTotalPkts The aggregate number of total packets switched by the system on
all the flows matching this query. This is a snapshot value and
is valid only when the corresponding instance of
c… | column | CiscoGauge64 | .1.3.6.1.4.1.9.9.97.1.2.8.1.11 |
| cseFlowQueryResultTotalOctets The aggregate number of total octets switched by the system on
all the flows matching this query. This is a snapshot value
and is valid only when the corresponding instance of
cs… | column | CiscoGauge64 | .1.3.6.1.4.1.9.9.97.1.2.8.1.12 |
| cseFlowQueryResultAvgDuration The average duration of the flows matching this query. This is
a snapshot value and is valid only when the corresponding
instance of cseFlowQueryResultingRows is greater
than or … | column | SNMPv2-TCTimeInterval | .1.3.6.1.4.1.9.9.97.1.2.8.1.13 |
| cseFlowQueryResultAvgIdle The elapsed time since the flows were last used, averaged over
all flows matching this query. This is a snapshot value
and is valid only when the corresponding instance of
cseFlo… | column | SNMPv2-TCTimeInterval | .1.3.6.1.4.1.9.9.97.1.2.8.1.14 |
| cseFlowQueryStatus The status object used to manage rows in this table.
When set to active(1), the query is initiated.
Once initiated, the value may
not be modified until the value of cseFlowQuery… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.97.1.2.8.1.15 |
| cseFlowQueryCreateTime Time when this query was created. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.9.97.1.2.8.1.16 |
| cseFlowQueryTotalFlows The total number of L3 flows matching the query criterion. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.97.1.2.8.1.17 |
| cseFlowQuerySkipNFlows The number of searched flows to be skipped before storing
any L3 flows in cseFlowDataTable.
This object can be used along with cseFloQueryTotalFlows
object to skip … | column | Integer32 | .1.3.6.1.4.1.9.9.97.1.2.8.1.18 |
| cseFlowQueryMask Setting each value causes the appropriate action:
'dstOnly' - causes the creation of rows in the
cseFlowDataTable corresponding to the current L3 flow
information … | column | Enumeration | .1.3.6.1.4.1.9.9.97.1.2.8.1.2 |
| cseFlowQueryTransport The IP transport protocol type specified for this query. Ignored
for IPX flow queries. The value of this object cannot be
modified when the corresponding instance of cseFlowQuery… | column | Bits | .1.3.6.1.4.1.9.9.97.1.2.8.1.3 |
| cseFlowQuerySource The source network address and port (if applicable). The
value of this object cannot be modified when the
corresponding instance of
cseFlowQueryStatus is 'active'. | column | FlowAddressComponent | .1.3.6.1.4.1.9.9.97.1.2.8.1.4 |
| cseFlowQuerySourceMask The source address mask to be applied to the corresponding
instance of cseFlowQuerySource. The value of this object
cannot be modified when the corresponding instance of
cseFlow… | column | FlowAddressComponent | .1.3.6.1.4.1.9.9.97.1.2.8.1.5 |
| cseFlowQueryDestinationMask The destination address mask to be applied to the corresponding
instance of cseFlowQueryDestination. The value of this object
cannot be modified when the corresponding instance o… | column | FlowAddressComponent | .1.3.6.1.4.1.9.9.97.1.2.8.1.7 |
| cseFlowQueryRouterIndex Index of the router for which the flows are available.
An 'all-zero' IP address indicates that the query is for
any router. The value of this object cannot be modified
when the c… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.9.97.1.2.8.1.8 |
| cseFlowQueryOwner The manager entity that configured this entry and is therefore
using the resources assigned to it. | column | IF-MIBOwnerString | .1.3.6.1.4.1.9.9.97.1.2.8.1.9 |