cslbxVirtualMaxConns
CISCO-SLB-EXT-MIB ·
.1.3.6.1.4.1.9.9.254.1.8.1.1.9
Object
column
r/w
Unsigned32
The maximum number of connections can be concurrently opened to this virtual server. The value of zero indicates that there is no upper limit of connections to this virtual server.
Context
- MIB
- CISCO-SLB-EXT-MIB
- OID
.1.3.6.1.4.1.9.9.254.1.8.1.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cslbxVirtualServerTableEntry
- Table
- cslbxVirtualServerTable
- Siblings
- 15
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cslbxVirtualAdvertiseOption The advertise option for the virtual IP address.
This value and the cslbxVirtualAdvertise value will
determine whether and when to add the virtual IP
address into the static route… | column | SlbIpAdvertise | .1.3.6.1.4.1.9.9.254.1.8.1.1.1 |
| cslbxVirtualOwnerName The name of the associated Owner. | column | SlbObjectNameString | .1.3.6.1.4.1.9.9.254.1.8.1.1.10 |
| cslbxVirtualFlowMode The direction of the traffic flowing through the
SLB device. | column | SlbDirectionalMode | .1.3.6.1.4.1.9.9.254.1.8.1.1.11 |
| cslbxVirtualSSLStickyOffset The number of bytes offset into the SSL session ID
where the sticky data started. | column | bytes Unsigned32 | .1.3.6.1.4.1.9.9.254.1.8.1.1.12 |
| cslbxVirtualSSLStickyLength The number of bytes of SSL session ID to be used as
sticky data. | column | bytes Unsigned32 | .1.3.6.1.4.1.9.9.254.1.8.1.1.13 |
| cslbxVirtualReverseStickyGroup The group number of the sticky group to be used when
inserting reverse sticky entry. The value of zero
indicates that reverse sticky is not enabled. | column | Unsigned32 | .1.3.6.1.4.1.9.9.254.1.8.1.1.14 |
| cslbxVirtualBackupFarmName The backup server farm to be used in case the primary
server farm has no active server. | column | SlbObjectNameString | .1.3.6.1.4.1.9.9.254.1.8.1.1.15 |
| cslbxVirtualBkFarmStickyEnabled The current setting for enabling sticky option on
the backup server farm. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.254.1.8.1.1.16 |
| cslbxVirtualVlanId The VLAN ID associated with the virtual server.
Only traffic from this VLAN may match the
virtual server. By default (value of zero), a
virtual server may match traffic from any V… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.254.1.8.1.1.2 |
| cslbxVirtualReplicationMode Specifies which information will be replicated
from the active device to a standby device in a
fault tolerant configuration. | column | SlbReplicationMode | .1.3.6.1.4.1.9.9.254.1.8.1.1.3 |
| cslbxVirtualPendingTimer The length of time before a connection in the
pending state gets torn down. | column | seconds SNMPv2-TCTimeInterval | .1.3.6.1.4.1.9.9.254.1.8.1.1.4 |
| cslbxVirtualL7MaxParseLength The maximum number of characters to be parsed for
Layer 7 (application level) specific information.
If HTTP processing is required on an HTTP request
or response with HTTP header … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.254.1.8.1.1.5 |
| cslbxVirtualHttpPersistenceSlb The setting for load balancing each request in a
HTTP 1.1 persistence connection. If set to 'true',
the SLB device may direct successive HTTP requests
in the same TCP connection … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.254.1.8.1.1.6 |
| cslbxVirtualURLHashBeginString The sub-string within the URL string at which to
start the hashing operation. The hash result
will be used in the server farm with predictor
'urlHash'. An empty string indicates… | column | SlbRegularExpression | .1.3.6.1.4.1.9.9.254.1.8.1.1.7 |
| cslbxVirtualURLHashEndString The sub-string within the URL string at which to
end the hashing operation. The hash result
will be used in the server farm with predictor
'urlHash'. An empty string indicates h… | column | SlbRegularExpression | .1.3.6.1.4.1.9.9.254.1.8.1.1.8 |