cnpdThresholdConfigRising
CISCO-NBAR-PROTOCOL-DISCOVERY-MIB ·
.1.3.6.1.4.1.9.9.244.1.5.1.1.9
Object
column
r/w
Unsigned32
This is the threshold object which the managment
station sets to determine if it gets breached. It
indicates the statistic being sampled was
rising.
When the current sample is greater than or
equal to this object, and the value at the last
sampling interval was less than this object (in
other words the value is rising), an entry in the
cnpdThresholdHistoryTable will be created.
After a rising event is generated, another such
event will not be generated until the sampled value
falls below this threshold and reaches the
cnpdThresholdConfigFalling value.
This ensures that samples which are taken
after a cnpdThresholdConfigRising threshold event
has been created, do not create further thresholds
and therefore notifications, until the
cnpdThresholdConfigFalling threshold has been met.
Thus a very short cnpdThresholdConfigInterval can be
chosen without risk of multiple notifications for
the same threshold breach condition.
Context
- MIB
- CISCO-NBAR-PROTOCOL-DISCOVERY-MIB
- OID
.1.3.6.1.4.1.9.9.244.1.5.1.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cnpdThresholdConfigEntry
- Table
- cnpdThresholdConfigTable
- Siblings
- 10
Syntax
Unsigned32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cnpdThresholdConfigIndex A monotonically increasing integer which
uniquely identifies an entry in the
cnpdThresholdConfigTable. | column | Unsigned32 | .1.3.6.1.4.1.9.9.244.1.5.1.1.1 |
| cnpdThresholdConfigFalling This is the threshold object which the management
station sets to determine if it gets breached. It
indicates the statistic being sampled was
falling.
When curre… | column | Unsigned32 | .1.3.6.1.4.1.9.9.244.1.5.1.1.10 |
| cnpdThresholdConfigStatus This object is used to create or delete
the row entry in cnpdThresholdConfigTable.
When creating a row entry the management station
is required to specify a valu… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.244.1.5.1.1.12 |
| cnpdThresholdConfigIfIndex This object allows the management station to
select the interface, which Protocol Discovery is
running on, to be used to create this
cnpdThresholdConfigTable entry. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.9.9.244.1.5.1.1.2 |
| cnpdThresholdConfigInterval The interval in seconds over which the data is
sampled and compared with cnpdThresholdConfigRising
and cnpdThresholdConfigFalling thresholds. | column | seconds Unsigned32 | .1.3.6.1.4.1.9.9.244.1.5.1.1.3 |
| cnpdThresholdConfigSampleType The method of sampling the selected statistic and
calculating the value to be compared against
cnpdThresholdConfigRising or
cnpdThresholdConfigFalling thresholds.
… | column | Enumeration | .1.3.6.1.4.1.9.9.244.1.5.1.1.4 |
| cnpdThresholdConfigProtocol The application or protocol which the
management station wishes to configure a
threshold on.
This object is an index into the
SupportedProtocolsTable where details… | column | Unsigned32 | .1.3.6.1.4.1.9.9.244.1.5.1.1.5 |
| cnpdThresholdConfigProtocolAny If set to 'true' - this threshold is configured
to check for any protocol which meets the threshold
criteria. This means that multiple protocols can
generate ThresholdHistoryTable… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.244.1.5.1.1.6 |
| cnpdThresholdConfigStatsSelect This object allows the management station to
select the statistic used to base the threshold
on.
For example a cnpdThresholdConfigStatsSelect of
bitRateSum means cn… | column | CiscoPdDataType | .1.3.6.1.4.1.9.9.244.1.5.1.1.7 |
| cnpdThresholdConfigStartup This controls the type of notification that is
sent when this threshold entry is first enabled.
Because there is no previous sampling history,
choosing one of the… | column | Enumeration | .1.3.6.1.4.1.9.9.244.1.5.1.1.8 |