cnpdThresholdConfigInterval
CISCO-NBAR-PROTOCOL-DISCOVERY-MIB ·
.1.3.6.1.4.1.9.9.244.1.5.1.1.3
Object
column
r/w
seconds Unsigned32
The interval in seconds over which the data is sampled and compared with cnpdThresholdConfigRising and cnpdThresholdConfigFalling thresholds.
Context
- MIB
- CISCO-NBAR-PROTOCOL-DISCOVERY-MIB
- OID
.1.3.6.1.4.1.9.9.244.1.5.1.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Units
- seconds
- Parent
- cnpdThresholdConfigEntry
- Table
- cnpdThresholdConfigTable
- Siblings
- 10
Syntax
seconds Unsigned32
Values & Constraints
Object Constraints
range: 1-1000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cnpdThresholdConfigIndex A monotonically increasing integer which
uniquely identifies an entry in the
cnpdThresholdConfigTable. | column | Unsigned32 | .1.3.6.1.4.1.9.9.244.1.5.1.1.1 |
| cnpdThresholdConfigFalling This is the threshold object which the management
station sets to determine if it gets breached. It
indicates the statistic being sampled was
falling.
When curre… | column | Unsigned32 | .1.3.6.1.4.1.9.9.244.1.5.1.1.10 |
| cnpdThresholdConfigStatus This object is used to create or delete
the row entry in cnpdThresholdConfigTable.
When creating a row entry the management station
is required to specify a valu… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.244.1.5.1.1.12 |
| cnpdThresholdConfigIfIndex This object allows the management station to
select the interface, which Protocol Discovery is
running on, to be used to create this
cnpdThresholdConfigTable entry. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.9.9.244.1.5.1.1.2 |
| cnpdThresholdConfigSampleType The method of sampling the selected statistic and
calculating the value to be compared against
cnpdThresholdConfigRising or
cnpdThresholdConfigFalling thresholds.
… | column | Enumeration | .1.3.6.1.4.1.9.9.244.1.5.1.1.4 |
| cnpdThresholdConfigProtocol The application or protocol which the
management station wishes to configure a
threshold on.
This object is an index into the
SupportedProtocolsTable where details… | column | Unsigned32 | .1.3.6.1.4.1.9.9.244.1.5.1.1.5 |
| cnpdThresholdConfigProtocolAny If set to 'true' - this threshold is configured
to check for any protocol which meets the threshold
criteria. This means that multiple protocols can
generate ThresholdHistoryTable… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.244.1.5.1.1.6 |
| cnpdThresholdConfigStatsSelect This object allows the management station to
select the statistic used to base the threshold
on.
For example a cnpdThresholdConfigStatsSelect of
bitRateSum means cn… | column | CiscoPdDataType | .1.3.6.1.4.1.9.9.244.1.5.1.1.7 |
| cnpdThresholdConfigStartup This controls the type of notification that is
sent when this threshold entry is first enabled.
Because there is no previous sampling history,
choosing one of the… | column | Enumeration | .1.3.6.1.4.1.9.9.244.1.5.1.1.8 |
| cnpdThresholdConfigRising This is the threshold object which the managment
station sets to determine if it gets breached. It
indicates the statistic being sampled was
rising.
When the curre… | column | Unsigned32 | .1.3.6.1.4.1.9.9.244.1.5.1.1.9 |