cmqVoIPCallActiveTxVadEnabled
CISCO-MEDIA-QUALITY-MIB ·
.1.3.6.1.4.1.9.9.769.1.1.1.1.46
Object
column
SNMPv2-TCTruthValue
This flag indicates whether VAD (Voice Activation Detector) is enabled or disabled. A value of 'true' indicates enabled and a value of 'false' indicates disabled. Default is disabled.
Context
- MIB
- CISCO-MEDIA-QUALITY-MIB
- OID
.1.3.6.1.4.1.9.9.769.1.1.1.1.46- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cmqVoIPCallActiveEntry
- Table
- cmqVoIPCallActiveTable
- Siblings
- 49
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cmqVoIPCallActiveConnectionId The global connection identifier for the active VoIP leg of the
call. | column | CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcGUid | .1.3.6.1.4.1.9.9.769.1.1.1.1.1 |
| cmqVoIPCallActiveRxPktLossConcealDur The sum of error predictive concealment and bad protocol
concealment in milliseconds. | column | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.769.1.1.1.1.10 |
| cmqVoIPCallActiveRxPktCntExpected The expected number of packets to be received. | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.769.1.1.1.1.11 |
| cmqVoIPCallActiveRxPktCntNotArrived The expected number of packets minus the number of received
packets. | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.769.1.1.1.1.12 |
| cmqVoIPCallActiveRxPktCntComfortNoise The number of received comfort noise packets for the
call leg. | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.769.1.1.1.1.13 |
| cmqVoIPCallActiveRxPktCntUnusableLate The number of received voice packets that arrived too late to
playout with CODEC (Coder/Decoder) during the call. | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.769.1.1.1.1.14 |
| cmqVoIPCallActiveRxPktCntDiscarded The sum of the number of late packets and the number of bad
protocol packets. | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.769.1.1.1.1.15 |
| cmqVoIPCallActiveRxPktCntEffLoss The total number of never-arrived packets and the number of
discarded packets. | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.769.1.1.1.1.16 |
| cmqVoIPCallActiveRxUnimpairedSecOK The cumulative number of seconds during which there was no
concealment and is considered as OK seconds. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.769.1.1.1.1.17 |
| cmqVoIPCallActiveRxConcealSec The cumulative number of seconds during which there was some
concealment. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.769.1.1.1.1.18 |
| cmqVoIPCallActiveRxSevConcealSec The total number of seconds that are severely concealed from
the start of the voice stream. A severly concealed second has
more than 50ms of concealment. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.769.1.1.1.1.19 |
| cmqVoIPCallActiveCallReferenceId The call reference ID associates the video call entry and voice
call entry of the same endpoint. An audio-only call with a call
reference ID of zero will not have a video call en… | column | CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcCallReferenceIdOrZero | .1.3.6.1.4.1.9.9.769.1.1.1.1.2 |
| cmqVoIPCallActiveRxJBufMode The jitter buffer mode configured for the endpoint.
adaptive (1): an adaptive size algorithm for jitter buffer,
fixed (2): a fixed size algorithm for jitter buffer,
unknown (3):… | column | Enumeration | .1.3.6.1.4.1.9.9.769.1.1.1.1.20 |
| cmqVoIPCallActiveRxJBufNomDelay The nominal jitter buffer playout delay in milliseconds
configured for the endpoint. | column | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.769.1.1.1.1.21 |
| cmqVoIPCallActiveRxJBufDlyNow The playout delay buffer in milliseconds to accommodate
interarrival jitter. The interarrival jitter is the network
arrival jitter between consecutive frames measured at the
recei… | column | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.769.1.1.1.1.22 |
| cmqVoIPCallActiveRxJBufLowWater The minimum jitter buffer playout delay in milliseconds
configured for the endpoint. | column | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.769.1.1.1.1.23 |
| cmqVoIPCallActiveRxJBuffHiWater The maximum jitter buffer playout delay in milliseconds
configured for the endpoint. | column | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.769.1.1.1.1.24 |
| cmqVoIPCallActive3550JShortTermAvg The instantaneous RFC3550 playout delay buffer in milliseconds
to accommodate packet jitter. | column | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.769.1.1.1.1.25 |
| cmqVoIPCallActive3550JCallAvg The long-term average of multiple RFC3550 playout delay buffer
in milliseconds to accommodate packet jitter. | column | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.769.1.1.1.1.26 |
| cmqVoIPCallActiveRxSignalLvl The instantaneous input signal level to the telephony
interface (TDM to IP network) that is used by the call leg. | column | 0.1 dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.769.1.1.1.1.27 |
| cmqVoIPCallActiveRxPred107Rscore The R-factor based MOS Listening Quality, which is listening
quality minus clarity only, with no delay component. A value of
0 indicates an invalid score and a positive value indi… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.769.1.1.1.1.28 |
| cmqVoIPCallActiveRxPred107RMosListen The MOS Listening Quality Estimate is computed on a running
basis with a new value every 10 seconds of received speech. A
value of 0 indicates an invalid score and a positive valu… | column | percent SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.769.1.1.1.1.29 |
| cmqVoIPCallActiveRxCodecId The codec type of the endpoint for the established
voice path. | column | CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcCoderTypeRate | .1.3.6.1.4.1.9.9.769.1.1.1.1.3 |
| cmqVoIPCallActiveRxPred107RScoreConv The R-factor based MOS Conversation Quality, which is based on
loss plus absolute delay. A value of 0 indicates an invalid
score and a positive value indicates a valid score. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.769.1.1.1.1.30 |
| cmqVoIPCallActiveRxPred107RMosConv Th MOS Conversation Quality Estimate is computed on a running
basis with a new value every 10 seconds of received speech. A
value of 0 indicates an invalid score and a positive va… | column | percent SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.769.1.1.1.1.31 |
| cmqVoIPCallActiveRxPred107CodecIeBase The base Ie score is a factor to calculate IeEff value. It is
obtained from G.113 table according to the codec type and is
defined in kilobits per second. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.769.1.1.1.1.32 |
| cmqVoIPCallActiveRxPred107CodecBPL The bpl is a factor to calculate IeEff value. It is obtained
from G.113 table according to the codec type and is defined in
kilobits per second. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.769.1.1.1.1.33 |
| cmqVoIPCallActiveRxPred107DefaultR0 R0 is a factor based on signal-to-noise ratio which also
includes loudness ratings. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.769.1.1.1.1.34 |
| cmqVoIPCallActiveRxPred107IeEff Ie-eff is one of the components to contribute to MOS R-factor
calculations, where R-factor is based on ITU-T G.107. Ie is a
component which depends on the real-time packet loss, w… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.769.1.1.1.1.35 |
| cmqVoIPCallActiveRxPred107Idd Idd is one of the components to contribute to MOS R-factor
calculations, where R-factor is based on ITU-T G.107. Idd is a
delay impairment factor which depends on the real-time ro… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.769.1.1.1.1.36 |
| cmqVoIPCallActiveRxPredMosLqoAvg The statistical average MOS score of all the previous
instantaneous values. A value of 0 indicates an invalid score
and a positive value indicates a valid score. | column | percent SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.769.1.1.1.1.37 |
| cmqVoIPCallActiveRxPredMosLqoRecent The most recent MOS score with K-factor input based on frame
loss and codec. A value of 0 indicates an invalid score and a
positive value indicates a valid score. | column | percent SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.769.1.1.1.1.38 |
| cmqVoIPCallActiveRxPredMosLqoBaseline The maximum or codec zero-impairment baseline MOS score of all
the previous instantaneous values. A value of 0 indicates an
invalid score and a positive value indicates a valid sc… | column | percent SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.769.1.1.1.1.39 |
| cmqVoIPCallActiveRxSevConcealRatioPct The ratio of severely concealed seconds to the sum of
unimpaired seconds and concealed seconds. | column | percent SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.769.1.1.1.1.4 |
| cmqVoIPCallActiveRxPredMosLqoMin The statistical minimum MOS score of all the previous
instantaneous values. A value of 0 indicates an invalid score
and a positive value indicates a valid score. | column | percent SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.769.1.1.1.1.40 |
| cmqVoIPCallActiveRxPredMosLqoNumWin A window in 8 seconds of frame loss data required to calculate
the MOS estimate. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.769.1.1.1.1.41 |
| cmqVoIPCallActiveRxPredMosLqoBursts The MOS score calculated with K-factor input of consecutive
frame loss events, or error bursts. A value of 0 indicates an
invalid score and a positive value indicates a valid scor… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.769.1.1.1.1.42 |
| cmqVoIPCallActiveRxPredMosLqoFrLoss The average frame loss count since call start. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.769.1.1.1.1.43 |
| cmqVoIPCallActiveRxPredMosLqoVerID The MOS K-factor version ID, e.g. CVTQ v0.95 | column | OctetString | .1.3.6.1.4.1.9.9.769.1.1.1.1.44 |
| cmqVoIPCallActiveTxCodecId The codec type of the endpoint for the established
voice path. | column | CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcCoderTypeRate | .1.3.6.1.4.1.9.9.769.1.1.1.1.45 |
| cmqVoIPCallActiveTxTmrCallDur Duration of transmit path open from this peer to voice gateway
for the call leg. | column | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.769.1.1.1.1.47 |
| cmqVoIPCallActiveTxTmrActSpeechDur Duration of speech transmitted from this peer to voice gateway
for the call leg. | column | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.769.1.1.1.1.48 |
| cmqVoIPCallActiveTxSignalLvl The instantaneous output signal level from the telephony
interface (TDM to IP network) that is used by the call leg. | column | 0.1 dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.769.1.1.1.1.49 |
| cmqVoIPCallActiveRxCallConcealRatioPct The ratio of the recent concealment time to recent talk-mode
time interval. The talk-mode interval is 3 seconds. | column | percent SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.769.1.1.1.1.5 |
| cmqVoIPCallActiveTxNoiseFloor The instantaneous noise floor level estimate if VAD is
enabled. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.769.1.1.1.1.50 |
| cmqVoIPCallActiveRxPktLossRatioPct The ratio of total effective received packet loss to the number
of RTP packets expected. | column | percent SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.769.1.1.1.1.6 |
| cmqVoIPCallActiveRxRoundTripTime The round-trip delay is the sum of measured network delay plus
transmit and receive endpoint processing delays. | column | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.769.1.1.1.1.7 |
| cmqVoIPCallActiveRxCallDur Duration of receive path open from this peer to voice gateway
for the call leg. | column | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.769.1.1.1.1.8 |
| cmqVoIPCallActiveRxVoiceDur Duration of speech received from this peer to voice gateway for
the call leg. | column | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.769.1.1.1.1.9 |