cLWlanPolicyUserIdleThreshold
CISCO-LWAPP-WLAN-POLICY-MIB ·
.1.3.6.1.4.1.9.9.853.1.2.1.1.37
Object
column
r/w
bytes Unsigned32
This object specifies a threshold triggered timeout where if a client has not sent a threshold quota of data within the specified user idle timeout, the client is considered to be inactive and is deauthenticated. If the data sent by the client is more than the threshold quota specified within the user idle timeout, the client is considered to be active and the controller refreshes for another timeout period. If the threshold quota is exhausted within the timeout period, the timeout period is refreshed.
Context
- MIB
- CISCO-LWAPP-WLAN-POLICY-MIB
- OID
.1.3.6.1.4.1.9.9.853.1.2.1.1.37- Type
- column
- Access
- readwrite
- Status
- current
- Units
- bytes
- Parent
- cLWlanPolicyConfigEntry
- Table
- cLWlanPolicyConfigTable
- Siblings
- 70
Syntax
bytes Unsigned32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cLWlanWlanPolicyName This object specifies one instance of a WLAN policy on the
controller. | column | OctetString | .1.3.6.1.4.1.9.9.853.1.2.1.1.1 |
| cLWlanPolicyAssocCentral This object indicates the behavior of the REAP when
handling the (re-)association management frames from
associated to it through the WLAN policy identified by
policy profile name… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.853.1.2.1.1.10 |
| cLWlanPolicyIPv4AclName This object specifies the IPV4 ACL Name for wlan. | column | OctetString | .1.3.6.1.4.1.9.9.853.1.2.1.1.11 |
| cLWlanPolicyIPv6AclName This object specifies the IPV6 ACL Name for wlan. | column | OctetString | .1.3.6.1.4.1.9.9.853.1.2.1.1.12 |
| cLWlanPolicyL2AclName This object specifies the name of the L2ACL applied to this
WLAN. If it is required to remove the ACL name for a WLAN,
it should be set to 'none'. | column | OctetString | .1.3.6.1.4.1.9.9.853.1.2.1.1.13 |
| cLWlanPolicySessionTimeout This object specifies the session timeout to be applied on
client using a Policy. | column | seconds Unsigned32 | .1.3.6.1.4.1.9.9.853.1.2.1.1.14 |
| cLWlanPolicyUserIdleTimeout This object specifies the timeout value of user for a
WLAN. | column | seconds Unsigned32 | .1.3.6.1.4.1.9.9.853.1.2.1.1.15 |
| cLWlanPolicyClientExclTimeout This object specifies the client exclusiontimeout
value of user for a WLAN.
Modifying the timeout to zero (0) means the client will be
excluded indefinitely until it is manually … | column | seconds Unsigned32 | .1.3.6.1.4.1.9.9.853.1.2.1.1.16 |
| cLWlanPolicyNativeProfiling This object specfies to enable or disable client device
classification.
A value of 'true' indicates native profiling is enabled.
A value of 'false' indicates native profiling is… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.853.1.2.1.1.17 |
| cLWlanPolicySubscriberPolicyName This object specifies a native profiling classification
policy configured on the Wireless LAN Controller. | column | OctetString | .1.3.6.1.4.1.9.9.853.1.2.1.1.18 |
| cLWlanPolicyHttpDeviceProfiling This object specfies the client local profiling on a wlan.
A value of 'true' indicates http device profiling is
enabled.
A value of 'false' indicate http device pr… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.853.1.2.1.1.19 |
| cLWlanPlcyRowStatus This object specifies the status column for this row and
used to create, modify and delete specific instances of
rows in this table.
This table supports modification of writable … | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.853.1.2.1.1.2 |
| cLWlanPolicyDHCPDeviceProfiling This object specfies the client dhcp profiling on a wlan.
A value of 'true' indicates dhcp device profiling is
enabled.
A value of 'false' indicates dhcp device pr… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.853.1.2.1.1.20 |
| cLWlanPolicyNetflowIPv4InputMonitorName deprecated This object specifies the input IPv4 Netflow Monitor name
assigned to this WLAN.
An empty string specifies no flow monitor is being
associated to WLAN policy profile. An empty f… | column | OctetString | .1.3.6.1.4.1.9.9.853.1.2.1.1.21 |
| cLWlanPolicyNetflowIPv4OutputMonitorName deprecated This object specifies the output IPv4 Netflow Monitor name
assigned to this WLAN.
An empty string specifies no flow monitor is being
associated to WLAN policy profile. An empty fl… | column | OctetString | .1.3.6.1.4.1.9.9.853.1.2.1.1.22 |
| cLWlanPolicyNetflowIPv6InputMonitorName deprecated This object specifies the input IPv6 Netflow Monitor name
assigned to this WLAN.
An empty string specifies no flow monitor is being
associated to WLAN policy profile.
An empty f… | column | OctetString | .1.3.6.1.4.1.9.9.853.1.2.1.1.23 |
| cLWlanPolicyNetflowIPv6OutputMonitorName deprecated This object specifies the output IPv6 Netflow Monitor name
assigned to this WLAN.
An empty string specifies no flow monitor is being
associated to WLAN policy profile.
An empty … | column | OctetString | .1.3.6.1.4.1.9.9.853.1.2.1.1.24 |
| cLWlanPolicyQosPerSSIDInput This object specifies the per ssid ingress service name. | column | OctetString | .1.3.6.1.4.1.9.9.853.1.2.1.1.25 |
| cLWlanPolicyQosPerSSIDOutput This object specifies the per ssid egress service name. | column | OctetString | .1.3.6.1.4.1.9.9.853.1.2.1.1.26 |
| cLWlanPolicyQosPerBSSIDInput This object specifies the per client ingress service name. | column | OctetString | .1.3.6.1.4.1.9.9.853.1.2.1.1.27 |
| cLWlanPolicyQosPerBSSIDOutput This object specifies the per client egress service name. | column | OctetString | .1.3.6.1.4.1.9.9.853.1.2.1.1.28 |
| cLWlanPolicyBlacklistTimeout This object specifies the timeout for blacklisted Mobile
Stations after which the mobile station will be
automatically de-authenticated.
Mobile Station are blacklisted by MAC add… | column | seconds Unsigned32 | .1.3.6.1.4.1.9.9.853.1.2.1.1.29 |
| cLWlanPolicyDescription This object specifies the description associated
to this WLAN policy.This can be any user defined
string. | column | OctetString | .1.3.6.1.4.1.9.9.853.1.2.1.1.3 |
| cLWlanPolicyBlacklistingCapability This object specifies that one can enable or disable the
client backlisting feature for a WLAN.
A value of 'true' indicates that the clients can be blacklisted
by… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.853.1.2.1.1.30 |
| cLWlanPolicyDhcpRequired This object specifies the DHCP requirement for all clients
on this WLAN. | column | Enumeration | .1.3.6.1.4.1.9.9.853.1.2.1.1.31 |
| cLWlanPolicyDhcpServerIpAddress This object specifies the IP Address of the DHCP Server.
Make it 0.0.0.0 or 0:0:0:0:0:0:0:0 to disable DHCP Relay.
Any value other than 0.0.0.0 or 0:0:0:0:0:0:0:0 it will be
assum… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.9.853.1.2.1.1.32 |
| cLWlanPolicyAaaOverride This object specifies to set when aaa override is enabled.
A value of 'true' indicates aaa override is enabled.
A value of 'false' indicates aaa override is disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.853.1.2.1.1.33 |
| cLWlanPolicyNac This object specifies to enabling/disabling NAC. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.853.1.2.1.1.34 |
| cLWlanPolicyStatus This object specifies whether the policy profile is
shutdown or active.
A value of 'true' indicates Wlan policy is active.
A value of 'false' indicates Wlan policy is shutdown. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.853.1.2.1.1.35 |
| cLWlanPolicyRadiusHttpProfiling This object specifies the Radius http profiling. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.853.1.2.1.1.36 |
| cLWlanPolicyQosFastlane This object specifies the user to enable or disable Auto
Qos mode in wireless policy profile.
disable - Disable of AutoQos Wireless Enterprise Policy.
enterprise - Enable AutoQo… | column | Enumeration | .1.3.6.1.4.1.9.9.853.1.2.1.1.38 |
| cLWlanPolicyDHCPOption82Ascii This object specifies the DHCP Option82 Ascii option.
A value of 'true' enable DHCP 82 Ascii option.
A value of 'false' disable DHCP 82 Ascii option. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.853.1.2.1.1.39 |
| cLWlanPolicyInterfaceName This object represents the interface attached to the
wireless lan. | column | OctetString | .1.3.6.1.4.1.9.9.853.1.2.1.1.4 |
| cLWlanPolicyDHCPOption82Rid This object specifies the DHCP Option82 Rid option.
A value of 'true' enable DHCP 82 option RID.
A value of 'false' disable DHCP 82 option RID. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.853.1.2.1.1.40 |
| cLWlanPolicyDHCPOption82Enable This object specifies the DHCP Option82 state.
A value of 'true' enable DHCP 82 option .
A value of 'false' disable DHCP 82 option. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.853.1.2.1.1.41 |
| cLWlanPolicyDHCPOption82Apmac This object specifies the DHCP Option82 format Ap mac
option.
A value of 'true' enable DHCP 82 option based on AP radio
mac.
A value of 'false' disable DHCP 82 option based on A… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.853.1.2.1.1.42 |
| cLWlanPolicyDHCPOption82Apethmac This object specifies the DHCP Option82 format Ap ethmac
option.
A value of 'true' enable DHCP 82 option based on AP eth
mac.
A value of 'false' disable DHCP 82 option based on AP… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.853.1.2.1.1.43 |
| cLWlanPolicyDHCPOption82Apname This object specifies the DHCP Option82 format Ap name
option.
A value of 'true' enable DHCP 82 option based on AP name.
A value of 'false' disable DHCP 82 option based on AP
nam… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.853.1.2.1.1.44 |
| cLWlanPolicyDHCPOption82Policytag This object specifies the DHCP Option82 format Policy tag
option
A value of 'true' enable DHCP 82 option based on policy
tag.
A value of 'false' disable DHCP 82 option based on po… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.853.1.2.1.1.45 |
| cLWlanPolicyDHCPOption82Aplocation This specifies represents the DHCP Option82 format Ap
location option
A value of 'true' enable DHCP 82 option based on Ap
Location.
A value of 'false' disable DHCP 82 option base… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.853.1.2.1.1.46 |
| cLWlanPolicyDHCPOption82Vlanid This object specifies the DHCP Option82 format Vlan_id
option.
A value of 'true' enable DHCP 82 option based on vlanid
A value of 'false' disable DHCP 82 option based on vlanid. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.853.1.2.1.1.47 |
| cLWlanPolicyDHCPOption82Ssid This object specifies the DHCP Option82 format SSID option.
A value of 'true' enable DHCP 82 option based on ssid.
A value of 'false' disable DHCP 82 option based on ssid.
Folowi… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.853.1.2.1.1.48 |
| cLWlanPolicySplitMacAcl This object specifies the ACL name for the split tunnel. | column | OctetString | .1.3.6.1.4.1.9.9.853.1.2.1.1.49 |
| cLWlanPolicyCentralSwitchMode This object allows the user to enable or disable Central
switching for wlan.
A value of 'true' indicates Central Switching is enabled
and Local Switching is disabled.
A value o… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.853.1.2.1.1.5 |
| cLWlanPolicyVlanCentralSwitching This object specifies whether switching will be local or
central when the flag is set.
A value of 'true' enable vlan based central switching.
A value of 'false' disable vlan bas… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.853.1.2.1.1.50 |
| cLWlanPolicyPassiveClient This object specifies whether passive-client support
is enabled or not on a policy. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.853.1.2.1.1.54 |
| cLWlanPolicyNBARProtocolDiscovery This object allows the user to enable or disable NBAR
Protocol discovery for a wlan.
A value of 'true' indicates NBAR protocol discovery is
active,
A value of 'false' indicates … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.853.1.2.1.1.55 |
| cLWlanPolicyStaticIPMobility This object specifies whether static ip mobility support
is enabled or not on a policy. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.853.1.2.1.1.56 |
| clWlanPolicyMobilityAnchor This object specifies the user to enable or disable mobility
anchor for a policy profile.
A value of 'true' indicates mobility anchor is active.
A Value of 'false' indicates mobil… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.853.1.2.1.1.57 |
| cLWlanPolicyBroadcastTagging This object specifies to set when broadcast tagging is
enabled.
A value of 'true' indicates broadcast tagging is enabled.
A value of 'false' indicates broadcast tagging is disable… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.853.1.2.1.1.58 |
| cLWlanPolicyWgbVlan This object specifies to enabling/disabling Client VLAN.
A value of 'true' indicates Client Vlan is enabled.
A value of 'false' indicates Client Vlan is disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.853.1.2.1.1.59 |
| cLWlanPolicyCentralAuthMode This object allows the user to enable or disable central
authentication for the wlan.
A value of 'true' indicates central authentication is
enabled.
A value of 'false' indicates… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.853.1.2.1.1.6 |
| cLWlanPolicyReanchorClassmap This object specifies the classmap containing the real-time
protocols, identified by AVC, to monitor to decide whether
a wireless client has to be reanchored to its foreign WLC. | column | OctetString | .1.3.6.1.4.1.9.9.853.1.2.1.1.60 |
| cLWlanUmbrellaParamMapName This object specifies a the umbrella parameter map name
configured on the Wireless LAN Controller. | column | OctetString | .1.3.6.1.4.1.9.9.853.1.2.1.1.61 |
| cLWlanPolicyAccountingList This object specifies the Accounting List for Policy Profile. | column | OctetString | .1.3.6.1.4.1.9.9.853.1.2.1.1.62 |
| cLWlanPolicyAAAPolicyName This object specifies the Wireless AAA Policy Name | column | OctetString | .1.3.6.1.4.1.9.9.853.1.2.1.1.63 |
| cLWlanPolicyQosCallSnooping This object specifies if QoS call snooping is enabled
A value of 'true' indicates call snoop is enabled.
A value of 'false' indicates call snoop is disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.853.1.2.1.1.64 |
| cLWlanPolicyDefaultSgt This object specifies the default security group tag. | column | Unsigned32 | .1.3.6.1.4.1.9.9.853.1.2.1.1.65 |
| cLWlanPolicyInlineTagging This object specifies whether inline tagging flag is
enabled on a particular policy profile.
A value of 'true' indicates inline tagging is enabled.
A value of 'false' indicates i… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.853.1.2.1.1.66 |
| cLWlanPolicySgaclEnforcement This object specifies the security group access control lists
enforcement for a policy profile | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.853.1.2.1.1.67 |
| cLWlanPolicyMdnsPolicy This object specifies the mDNS service policy
configured under WLAN policy. | column | OctetString | .1.3.6.1.4.1.9.9.853.1.2.1.1.68 |
| cLWlanPolicyHotspotAnqpServer This object specifies the Hotspot 2.0 ANQP Server | column | OctetString | .1.3.6.1.4.1.9.9.853.1.2.1.1.69 |
| cLWlanPolicyDhcpCentral This object indicates the behavior of the Access Point
when switching the data frames of the clients
associated to it through the WLAN policy identified
by policy profile name.
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.853.1.2.1.1.7 |
| cLWlanPolicyNacType deprecated This object specifies the type of NAC configured
radius - Identity Service Engine NAC configured
xwf - Express Wi-Fi NAC configured. | column | Enumeration | .1.3.6.1.4.1.9.9.853.1.2.1.1.70 |
| cLWlanPolicyARPProxy This object specifies whether ARP proxy is enabled on a
particular policy profile.
A value of 'true' indicates ARP proxy is enabled.
A value of 'false' indicates ARP proxy is dis… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.853.1.2.1.1.71 |
| cLWlanPolicyIPv6proxy This object specifies the type of IPV6 proxy mode configured
noproxy - no ipv6 proxy configured
dadproxy - DAD proxy is configured.
fullproxy - DAD and ND proxy is configure… | column | Enumeration | .1.3.6.1.4.1.9.9.853.1.2.1.1.72 |
| cLWlanPolicyMulticastFilter This object specifies whether multicast filter is enabled on a
particular policy profile.
A value of 'true' indicates multicast filter is enabled.
A value of 'false' indicates mul… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.853.1.2.1.1.73 |
| cLWlanPolicyQBSSLoad This object specifies whether QBSSload is enabled on a
particular policy profile.
A value of 'true' indicates QBSSload is enabled.
A value of 'false' indicates QBSSload is disable… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.853.1.2.1.1.74 |
| cLWlanPolicyL3Access This object specifies whether Layer-3 access is enabled on a
particular policy profile.
A value of 'true' indicates Layer-3 Access is enabled.
A value of 'false' indicates Layer-3… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.853.1.2.1.1.75 |
| cLWlanPolicyNatPatEnabled This object specifies whether Network Address Translation
(NAT) and Port Address Translation (PAT) are enabled on
this WLAN.
This can be enabled only when cLReapWlanDhcpCentral i… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.853.1.2.1.1.9 |