clMeshLtSrcMacAddress

CISCO-LWAPP-MESH-LINKTEST-MIB · .1.3.6.1.4.1.9.9.606.1.2.1.1.2
MIB view Table view

Object

column r/w SNMPv2-TCMacAddress 
This object represents the source mac address of AP
which initiates the link test to 
'clMeshLtDestMacAddress' involved in the particular run 
of linktest. This object must be set to a valid value 
when setting clMeshLtRowStatus to 'createAndGo' to 
initiate a run of linktest.

Context

MIB
CISCO-LWAPP-MESH-LINKTEST-MIB
OID
.1.3.6.1.4.1.9.9.606.1.2.1.1.2
Type
column
Access
readwrite
Status
current
Parent
clMeshLtEntry
Table
clMeshLtTable
Siblings
8

Syntax

SNMPv2-TCMacAddress
Source
SNMPv2-TCMacAddress
Base type
OctetString

Values & Constraints

Type Constraints
range: 6

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
clMeshLtIndex
This object uniquely identifies one particular run of the linktest initiated between the two mesh node neighbors identified by clMeshLtSrcMacAddress and clMeshLtDestMacAddress.
columnUnsigned32.1.3.6.1.4.1.9.9.606.1.2.1.1.1
clMeshLtDestMacAddress
This object represents the destination mac address of AP involved in the particular run of linktest. This object must be set to a valid value when setting clMeshLtRowStatus to 'cr…
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.9.9.606.1.2.1.1.3
clMeshLtDataRate deprecated
This object represents the data rate on backhaul link at which link test will be performed. Depending on the backhaul radio type, data rate will vary. if the backhaul radio is 8…
columnMbps SNMPv2-SMIUnsigned32.1.3.6.1.4.1.9.9.606.1.2.1.1.4
clMeshLtPktsPerSec
This object represents the number of packets to be sent per sec during link test.
columnpackets Unsigned32.1.3.6.1.4.1.9.9.606.1.2.1.1.5
clMeshLtPktSize
This object represents the size of packets to be sent during link test.
columnbytes Unsigned32.1.3.6.1.4.1.9.9.606.1.2.1.1.6
clMeshLtDuration
This object represents the duration, in seconds, of link test to be performed.
columnseconds Unsigned32.1.3.6.1.4.1.9.9.606.1.2.1.1.7
clMeshLtRowStatus
This object is the status column used for creating and deleting instances of the columnar objects in this table.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.9.9.606.1.2.1.1.8
clMeshLtDataRateValue
This object represents the data rate on backhaul link at which link test will be performed. Depending on the backhaul radio type, data rate will vary. If the valu…
columnEnumeration.1.3.6.1.4.1.9.9.606.1.2.1.1.9