clMeshLtPktSize
CISCO-LWAPP-MESH-LINKTEST-MIB ·
.1.3.6.1.4.1.9.9.606.1.2.1.1.6
Object
column
r/w
bytes Unsigned32
This object represents the size of packets to be sent during link test.
Context
- MIB
- CISCO-LWAPP-MESH-LINKTEST-MIB
- OID
.1.3.6.1.4.1.9.9.606.1.2.1.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Units
- bytes
- Parent
- clMeshLtEntry
- Table
- clMeshLtTable
- Siblings
- 8
Syntax
bytes Unsigned32
Values & Constraints
Object Constraints
range: 1-1500
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| clMeshLtIndex This object uniquely identifies one particular
run of the linktest initiated between the two mesh
node neighbors identified by clMeshLtSrcMacAddress
and clMeshLtDestMacAddress. | column | Unsigned32 | .1.3.6.1.4.1.9.9.606.1.2.1.1.1 |
| clMeshLtSrcMacAddress This object represents the source mac address of AP
which initiates the link test to
'clMeshLtDestMacAddress' involved in the particular run
of linktest. This object must be set… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.9.9.606.1.2.1.1.2 |
| clMeshLtDestMacAddress This object represents the destination mac address of
AP involved in the particular run of linktest. This
object must be set to a valid value when setting
clMeshLtRowStatus to 'cr… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.9.9.606.1.2.1.1.3 |
| clMeshLtDataRate deprecated This object represents the data rate on backhaul link
at which link test will be performed. Depending on the
backhaul radio type, data rate will vary. if the
backhaul radio is 8… | column | Mbps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.606.1.2.1.1.4 |
| clMeshLtPktsPerSec This object represents the number of packets to be
sent per sec during link test. | column | packets Unsigned32 | .1.3.6.1.4.1.9.9.606.1.2.1.1.5 |
| clMeshLtDuration This object represents the duration, in seconds, of link
test to be performed. | column | seconds Unsigned32 | .1.3.6.1.4.1.9.9.606.1.2.1.1.7 |
| clMeshLtRowStatus This object is the status column used for creating
and deleting instances of the columnar objects in
this table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.606.1.2.1.1.8 |
| clMeshLtDataRateValue This object represents the data rate on backhaul link
at which link test will be performed. Depending on the
backhaul radio type, data rate will vary.
If the valu… | column | Enumeration | .1.3.6.1.4.1.9.9.606.1.2.1.1.9 |