cldcDOT11ClientReasonCode

CISCO-LWAPP-DOT11-CLIENT-MIB · .1.3.6.1.4.1.9.9.599.1.2.3
MIB view Table view

Object

scalar Enumeration 
This object represents the reason code for failure of
client association. 
A value of 'unspecified' represents that the reason for failure is 
not specified.
A value 'previousAuthNotValid' represents that the reason for 
failure is previous authentication was not valid.
A value of 'deauthenticationLeaving' represents that the reason for
failure is leaving due to deauthentication.
A value of 'disassociationDueToInactivity' represents that the
reason for failure is disassociation due to inactivity.
A value of 'disassociationAPBusy' represents that the reason for 
failure is disassociation since AP was busy.
A value of 'class2FrameFromNonAuthStation' represents that the 
reason for failure is class 2 frame from non authenticated 
station.
A value of 'class2FrameFromNonAssStation' represents that the reason
for failure is class 2 frame from non associated station.
A value of 'disassociationStaHasLeft' represents that the reason for
failure is station has left due to disassociation.
A value of 'staReqAssociationWithoutAuth' represents that the reason 
for failure is station send association request without 
authentication.
A value of 'invalidInformationElement' represents that the reason 
for failure is invalid information element.
A value of 'groupCipherInvalid' represents that the reason for
failure is invalid group Cipher.
A value of 'unicastCipherInvalid' represents that the reason for 
failure is invalid unicast cipher.
A value of 'akmpInvalid' represents that the reason for failure is 
invalid key management protocol.
A value of 'unsupportedRsnVersion' represents that the reason for 
failure is unsupported RSN version.
A value of invalidRsnIeCapabilities' represents that the reason for 
failure is invalid RSN IE capabilities.
A value of 'cipherSuiteRejected' represents that the reason for 
failure is cipher suite not valid.
A value of 'missingReasonCode' represents that the reason for 
failure is reason code is missing.
A value of 'maxAssociatedClientsReached' represents that the reason 
for failure is maximum allowed associated client number has
reached.
A value of 'maxAssociatedClientsReachedOnRadio' represents that the
reason for failure is maximum allowed associated client number
has reached on radio.
A value of 'maxAssociatedClientsReachedOnWlan' represents that the
reason for failure is maximum allowed associated client 
number has reached on wlan.
A value of 'unSpecifiedQosFailure' represents that the reason for 
failure is QoS not supported.
A value of 'qosPolicyMismatch' represents that the reason for 
failure is mismatch on QOS policy.
A value of 'inSufficientBandwidth' represents that the reason for 
failure is insufficient bandwidth.
A value of 'inValidQosParams' represents that the reason for failure
is invalid QOS parameters.

Context

MIB
CISCO-LWAPP-DOT11-CLIENT-MIB
OID
.1.3.6.1.4.1.9.9.599.1.2.3
Type
scalar
Access
notifyonly
Status
current
Parent
cldcNotifObjects
Siblings
45

Syntax

Enumeration

Values & Constraints

Enumerated Values
1unspecified
2previousAuthNotValid
3deauthenticationLeaving
4disassociationDueToInactivity
5disassociationAPBusy
6class2FrameFromNonAuthStation
7class2FrameFromNonAssStation
8disassociationStaHasLeft
9staReqAssociationWithoutAuth
40invalidInformationElement
41groupCipherInvalid
42unicastCipherInvalid
43akmpInvalid
44unsupportedRsnVersion
45invalidRsnIeCapabilities
46cipherSuiteRejected
99missingReasonCode
101maxAssociatedClientsReached
105maxAssociatedClientsReachedOnRadio
106maxAssociatedClientsReachedOnWlan
200unSpecifiedQosFailure
201qosPolicyMismatch
202inSufficientBandwidth
203inValidQosParams

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cldcClientRSSI
This object represents the average RSSI for the mobile station.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.9.9.599.1.2.1
cldcClientEapType
This object represents EAP policy type used by the mobile station during association. A value of 'eapTls' represents the EAP policy type as EAP-TLS. A value of 'ttls' represents t…
scalarEnumeration.1.3.6.1.4.1.9.9.599.1.2.10
cldcClientAID
This object represents the AID allocated for the mobile station
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.9.9.599.1.2.11
cldcClientAuthenticationAlgorithm
This object represents the authentication algorithm of mobile station used for authentication. A value of 'openSystem' represents that the client used open system algorithm to get…
scalarEnumeration.1.3.6.1.4.1.9.9.599.1.2.12
cldcClientWepState
This object represents the WEP state of the mobile station. A value of 'enable' represents WEP state is enabled. A value of 'disable' represents WEP state is disbaled.
scalarEnumeration.1.3.6.1.4.1.9.9.599.1.2.13
cldcClientEncryptionCipher
This object represents encryption cipher selected for encryption of mobile station traffic. A value of 'ccmpAes' represents the encryption used is CCMP AES. A value of 'tkipMic' r…
scalarEnumeration.1.3.6.1.4.1.9.9.599.1.2.14
cldcClientPortNumber
This object represents the port number of this airespace switch on which the traffic of the mobile station is coming through.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.9.9.599.1.2.15
cldcClientAnchorAddressType
This object represents mobility anchor address type.
scalarINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.9.9.599.1.2.16
cldcClientAnchorAddress
This object represent anchor IP address. If the mobility status of the mobile station is anchor then it will have peer Ip address and will have anchor IP if the role is foreign
scalarINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.9.9.599.1.2.17
cldcClientEssIndex
This object represents the ESS index of the WLAN(SSID) that is being used by mobile station to connect to AP
scalarUnsigned32.1.3.6.1.4.1.9.9.599.1.2.18
cldcClientCcxVersion
This object represents the Cisco Compatible Extensions (CCX) version the client is using for communication with the AP. A value of 'notSupported' represents CCX version is not su…
scalarEnumeration.1.3.6.1.4.1.9.9.599.1.2.19
cldcClientSNR
This object represents the average SNR for the mobile station.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.9.9.599.1.2.2
cldcClientE2eVersion
This object represents the End-2-End Version the client is using for communication with the AP. A value of 'notSupported' represents end-2-end version is not supported. A value o…
scalarEnumeration.1.3.6.1.4.1.9.9.599.1.2.20
cldcClientInterface
This object represents the name of the interface of the mobile client on which traffic sent to the switch.
scalarOctetString.1.3.6.1.4.1.9.9.599.1.2.21
cldcClientMobilityStatus
This object represents the mobility role of the mobile station. A value of 'unassociated' represents mobility role is not associated. A value of 'local' represents mobility role …
scalarEnumeration.1.3.6.1.4.1.9.9.599.1.2.22
cldcClientStatusCode
This object represents status code of the mobile station
scalarInteger32.1.3.6.1.4.1.9.9.599.1.2.23
cldcClientDeleteAction
This object represents the action to deauthenticate the mobile station. A value of 'default' represents the state as default. A value of 'delete' represents the state as delete.
scalarEnumeration.1.3.6.1.4.1.9.9.599.1.2.24
cldcClientSecurityPolicyStatus
This object represents the security policy state of the mobile station. A value of 'completed' represents the mobile station has completed the security policy checks. A value of…
scalarEnumeration.1.3.6.1.4.1.9.9.599.1.2.25
cldcClientTrapEventTime
This object represents the trap event time of the client.
scalarSNMPv2-SMITimeTicks.1.3.6.1.4.1.9.9.599.1.2.26
cldcClientPolicyManagerState
This object represents the current policy enforcement manager state of the client in controller.
scalarSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.9.9.599.1.2.27
cldcClientAssocTime
This object represents the time at which client associated
scalarSNMPv2-TCTimeStamp.1.3.6.1.4.1.9.9.599.1.2.28
cldcClientPmipDataValid
This object represents whether client has valid PMIP data.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.599.1.2.29
cldcClientMobilityExtDataValid
This object represents new mobility status.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.599.1.2.30
cldcClientPolicyErrors
This object represents the number of policy errors for mobile station
scalarSNMPv2-SMICounter64.1.3.6.1.4.1.9.9.599.1.2.31
cldcClientSessionId
This object represents the session to which the client is associated.
scalarSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.9.9.599.1.2.32
cldcClientPmipNai
This object represents the name of the profile, the client is associated to.
scalarSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.9.9.599.1.2.33
cldcClientPmipState
This object indicates the state of the PMIP client: null: binding doesn't exist init: binding created, Retx timer running for PBU, binding not yet accepted from LMA, T…
scalarSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.9.9.599.1.2.34
cldcClientPmipInterface
This object indicates the interface to which the client is associated.
scalarOctetString.1.3.6.1.4.1.9.9.599.1.2.35
cldcClientPmipHomeAddrType
This object indicates the type of the Client's Home address made available through cldcClientPmipHomeAddress.
scalarINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.9.9.599.1.2.36
cldcClientPmipHomeAddr
This object indicates the Home Address of the client.
scalarINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.9.9.599.1.2.37
cldcClientPmipAtt
This object indicates the access technology type by which the client is currently attached. A value of 'reserved' indicates this value is reserved for future use. A value of 'logi…
scalarEnumeration.1.3.6.1.4.1.9.9.599.1.2.38
cldcClientPmipLocalLinkId
This object indicates the local link identifier of the client.
scalarSNMPv2-TCMacAddress.1.3.6.1.4.1.9.9.599.1.2.39
cldcDOT11ClientTxDataPackets
This object represents the number of data packets sent by this mobile station
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.9.9.599.1.2.4
cldcClientPmipLmaName
This object indicates the LMA to which the client is connected.
scalarSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.9.9.599.1.2.40
cldcClientPmipLifeTime
This object indicates the duration of the PMIP client association.
scalarSNMPv2-SMITimeTicks.1.3.6.1.4.1.9.9.599.1.2.41
cldcClientPmipDomainName
This object indicates the domain to which the PMIP client is associated.
scalarSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.9.9.599.1.2.42
cldcClientPmipUpKey
This object indicates the upstream key of the PMIP client.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.9.9.599.1.2.43
cldcClientPmipDownKey
This object indicates the downstream key of the PMIP client.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.9.9.599.1.2.44
cldcMaxClientsCount
This object represents the number of clients joined to the controller when ciscoLwappDot11ClientMaxClientsReached is sent.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.9.9.599.1.2.45
cldcMaxThresholdReachedClear
This object represents whether ciscoLwappDot11ClientMaxClientsReached is raise or clear. A value of 'true' indicates that this event is cleared A value of 'false' indicates that …
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.599.1.2.46
cldcDOT11ClientTxDataBytes
This object represents the number of data bytes sent by this mobile station
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.9.9.599.1.2.5
cldcDOT11ClientRxDataPackets
This object represents the number of data packets sent for this mobile station
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.9.9.599.1.2.6
cldcDOT11ClientRxDataBytes
This object represents the number of data bytes sent for this mobile station
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.9.9.599.1.2.7
cldcClientVlanId
This object represents VLAN ID of the interface to which the client is associated.
scalarInteger32.1.3.6.1.4.1.9.9.599.1.2.8
cldcClientPolicyType
This object represents security policy type on which the mobile station is associated. A value of 'dot1x' represents the policy type as dot1x. A value of 'wpa1' represents the pol…
scalarEnumeration.1.3.6.1.4.1.9.9.599.1.2.9