cldccOperParamsKeyMgmtMethod
CISCO-LWAPP-DOT11-CLIENT-CCXV5-REPORTING-MIB ·
.1.3.6.1.4.1.9.9.599.3.4.1.2.1.1.25
Object
column
CISCO-LWAPP-DOT11-CLIENT-CCX-TC-MIBCiscoLwappDot11ClientKeyMgmtMethod
This object indicates the key management method currently used by the client.
Context
- MIB
- CISCO-LWAPP-DOT11-CLIENT-CCXV5-REPORTING-MIB
- OID
.1.3.6.1.4.1.9.9.599.3.4.1.2.1.1.25- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cldccOperParamsEntry
- Table
- cldccOperParamsTable
- Siblings
- 23
Syntax
CISCO-LWAPP-DOT11-CLIENT-CCX-TC-MIBCiscoLwappDot11ClientKeyMgmtMethod
- Source
- CISCO-LWAPP-DOT11-CLIENT-CCX-TC-MIBCiscoLwappDot11ClientKeyMgmtMethod
- Base type
Enumeration
Values & Constraints
Type Values
0 | none |
1 | staticWep |
2 | dynamicWep |
3 | wpa |
4 | wpaCckm |
5 | wpa2 |
6 | wpa2Cckm |
7 | cckm |
255 | unknown |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cldccOperParamsStatus This object specifies the status of current request.
To trigger a request to the client to get the operational
information, this attribute is set to initiate(1). Once
the request … | column | CISCO-LWAPP-DOT11-CLIENT-CCX-TC-MIBCiscoLwappDot11ClientReqStatus | .1.3.6.1.4.1.9.9.599.3.4.1.2.1.1.1 |
| cldccOperParamsOSId This object indicates the operating system using the
wireless network adaptor. | column | OctetString | .1.3.6.1.4.1.9.9.599.3.4.1.2.1.1.10 |
| cldccOperParamsOSVersion This object indicates the version of operating
system using the wireless network adaptor. | column | OctetString | .1.3.6.1.4.1.9.9.599.3.4.1.2.1.1.11 |
| cldccOperParamsIpAddressMode This object indicates how the ip address was
assigned to the client.
static(0) - represents the address is assigned
statically.
dhcp (1) - represents the address is assigned
via… | column | Enumeration | .1.3.6.1.4.1.9.9.599.3.4.1.2.1.1.12 |
| cldccOperParamsIpv4Address This object indicates the ipv4 address
assigned to the client. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.9.599.3.4.1.2.1.1.13 |
| cldccOperParamsIpv4SubnetMask This object indicates the ipv4 subnet mask
assigned to the client. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.9.599.3.4.1.2.1.1.14 |
| cldccOperParamsIpv6Address This object indicates the IPv6 address
assigned to the client. | column | OctetString | .1.3.6.1.4.1.9.9.599.3.4.1.2.1.1.15 |
| cldccOperParamsIpv6SubnetMask This object indicates the mask for the ip address
assigned to the client. | column | OctetString | .1.3.6.1.4.1.9.9.599.3.4.1.2.1.1.16 |
| cldccOperParamsDefaultGateway This object indicates the default gateway chosen
for the client. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.9.599.3.4.1.2.1.1.17 |
| cldccOperParamsEntPhone This object indicates the enterprise phone number
for the client. | column | CISCO-TCCvE164Address | .1.3.6.1.4.1.9.9.599.3.4.1.2.1.1.18 |
| cldccOperParamsCellPhone This object indicates the cell phone number
for the client. | column | CISCO-TCCvE164Address | .1.3.6.1.4.1.9.9.599.3.4.1.2.1.1.19 |
| cldccOperParamsRadioType This object indicates the radio type of the client. | column | OctetString | .1.3.6.1.4.1.9.9.599.3.4.1.2.1.1.2 |
| cldccOperParamsFirmwareVersion This object indicates the string identifying the
version of firmware currently installed
on the client. | column | OctetString | .1.3.6.1.4.1.9.9.599.3.4.1.2.1.1.20 |
| cldccOperParamsDriverVersion This object indicates the string identifying the
driver version of firmware currently installed
on the client. | column | OctetString | .1.3.6.1.4.1.9.9.599.3.4.1.2.1.1.21 |
| cldccOperParamsPowerSaveMode This object indicates the type of power save mode configured
on the client. | column | CISCO-LWAPP-DOT11-CLIENT-CCX-TC-MIBCiscoLwappDot11ClientPowerSaveMode | .1.3.6.1.4.1.9.9.599.3.4.1.2.1.1.22 |
| cldccOperParamsAuthMethod This object indicates the authentication method
currently used by the client. | column | CISCO-LWAPP-DOT11-CLIENT-CCX-TC-MIBCiscoLwappDot11ClientAuthMethod | .1.3.6.1.4.1.9.9.599.3.4.1.2.1.1.23 |
| cldccOperParamsEncrMethod This object indicates the encryption method
currently used by the client. | column | CISCO-LWAPP-DOT11-CLIENT-CCX-TC-MIBCiscoLwappDot11ClientEncryptionMethod | .1.3.6.1.4.1.9.9.599.3.4.1.2.1.1.26 |
| cldccOperParamsDot1xSecurity This object indicates the 802.1x security
parameters currently configured for the client. | column | OctetString | .1.3.6.1.4.1.9.9.599.3.4.1.2.1.1.27 |
| cldccOperParamsSysName This object indicates the name of the client device.
It contains the system name assigned by the
operating system to the host device incorporating the
wireless network adaptor, … | column | OctetString | .1.3.6.1.4.1.9.9.599.3.4.1.2.1.1.28 |
| cldccOperParamsLocalization This object indicates the localization information
of the client device. | column | OctetString | .1.3.6.1.4.1.9.9.599.3.4.1.2.1.1.29 |
| cldccOperParamsSSId This object indicates the SSId being used by the client. | column | CISCO-LWAPP-DOT11-CLIENT-CCX-TC-MIBCiscoLwappDot11ClientSSId | .1.3.6.1.4.1.9.9.599.3.4.1.2.1.1.7 |
| cldccOperParamsDeviceName This object indicates the device name assigned to the
wireless network adaptor by the operating system,
e.g., WLAN Connection 1. | column | OctetString | .1.3.6.1.4.1.9.9.599.3.4.1.2.1.1.8 |
| cldccOperParamsDeviceType This object indicates what type of device is the client.
The different types of devices are:
laptop - the client machine is a laptop
pc - the client machine is a PC… | column | Enumeration | .1.3.6.1.4.1.9.9.599.3.4.1.2.1.1.9 |