ciuIfLoopStatus

Object

column Enumeration

Current ISDN BRI integrated U interface Loop status and
NT maintenance mode.  The definition of maintenance modes 
are as follows:
none - The U interface is not in either Loopback or
     maintenance mode.
type2Loopback - Type 2 (CO to U interface) Loopback
     mode; this mode is set to perform the loopback between
     CO and the ISDN BRI integrated U interface.
type3Loopback - Type 3 (processor to U interface) Loopback
     mode; this mode is set by router to perform the loopback
     between the router processor and the ISDN BRI integrated
     U interface.
ntQuietMode - NT quiet mode; this mode is set by CO for
     metallic loop tests. In the NT quiet mode, the ISDN U 
     interface will not attempt a start-up or will not 
     initiate transmission during metallic loop tests 
     conducted by the network.
ilmtMode - Insertion loss measurement test (ILMT); this mode 
     is set by CO for the Insertion loss measurement test. 
     The insertion loss measurement test will cause a known 
     test signal to be generated by the NT. This test will 
     be used in network measurements of DSL (Digital 
     Subscriber Line) transmission characteristics.

Context

MIB: CISCO-ISDNU-IF-MIB
OID: .1.3.6.1.4.1.9.9.18.1.1.2.1.6
Type: column
Access: readonly
Status: current
Parent: ciuIfStatusEntry
Groups: 1

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ISDNU-IF-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ISDNU-IF-MIB::ciuIfLoopStatus'

More examples

Read one indexed instance

/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'CISCO-ISDNU-IF-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ISDNU-IF-MIB::ciuIfLoopStatus.<ifIndex>'

Translate to a numeric OID

/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-ISDNU-IF-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-ISDNU-IF-MIB::ciuIfLoopStatus'

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	none
`2`	type2Loopback
`3`	type3Loopback
`4`	ntQuietMode
`5`	ilmtMode

Object

Context

Net-SNMP examples

Syntax

Values & Constraints

Conformance