cipslaAutoGroupDescription
CISCO-IPSLA-AUTOMEASURE-MIB ·
.1.3.6.1.4.1.9.9.633.1.1.1.2
Object
column
r/w
OctetString
This field is used to provide description for the group.
Context
- MIB
- CISCO-IPSLA-AUTOMEASURE-MIB
- OID
.1.3.6.1.4.1.9.9.633.1.1.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cipslaAutoGroupEntry
- Table
- cipslaAutoGroupTable
- Siblings
- 12
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-128
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cipslaAutoGroupName A group name which is used by a management application
to identify the group. | column | OctetString | .1.3.6.1.4.1.9.9.633.1.1.1.1 |
| cipslaAutoGroupADMeasureRetry This object specifies number of measurement retries to
be attempted for the discovered end point after the
connection to the end point is broken. If there is no
re-registration … | column | Unsigned32 | .1.3.6.1.4.1.9.9.633.1.1.1.10 |
| cipslaAutoGroupADDestIPAgeout This object represents the ageout time for the discovered
end point. If the end point becomes inactive for the period
of ageout time, the end point will be removed from the
dis… | column | seconds Unsigned32 | .1.3.6.1.4.1.9.9.633.1.1.1.11 |
| cipslaAutoGroupStorageType The storage type of this conceptual row. | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.9.9.633.1.1.1.12 |
| cipslaAutoGroupRowStatus The status of the conceptual group control row.
When the status is active, the other writable objects
may be modified unless the scheduler with name
specified by c… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.633.1.1.1.13 |
| cipslaAutoGroupDestinationName This object refers to the cipslaAutoGroupDestName
in cipslaAutoGroupDestTable. If the name entered
is not present in cipslaAutoGroupDestTable, then when
group is scheduled, no i… | column | OctetString | .1.3.6.1.4.1.9.9.633.1.1.1.3 |
| cipslaAutoGroupADDestPort This object represents the destination port number
for auto discovery use. | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.9.9.633.1.1.1.4 |
| cipslaAutoGroupOperTemplateName A string which is used by a management application to
identify the template which is associated with the group.
Depends on cipslaAutoGroupOperType, this object refers to
cipslaIcm… | column | OctetString | .1.3.6.1.4.1.9.9.633.1.1.1.5 |
| cipslaAutoGroupSchedulerId This object refers to the cipslaAutoGroupSchedId in
cipslaAutoGroupSchedTable, and is used to schedule
this group. | column | OctetString | .1.3.6.1.4.1.9.9.633.1.1.1.6 |
| cipslaAutoGroupQoSEnable When this object is set to true, QoS is enabled for this
group and this group is linked to policy map. The
restriction is that after QoS is enabled, it can not be
disabled for t… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.633.1.1.1.7 |
| cipslaAutoGroupOperType This object specifies the type of IP SLA operation.
When operation type is not ICMP jitter, then
cipslaAutoGroupOperTemplateName must be specified. | column | CISCO-IPSLA-TC-MIBIpSlaOperType | .1.3.6.1.4.1.9.9.633.1.1.1.8 |
| cipslaAutoGroupDestIPADEnable When this object is set to true, destination IP address
is populated through auto-discovery. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.633.1.1.1.9 |