cIpNetworkDiscoverySpinLock
CISCO-IP-NW-DISCOVERY-MIB ·
.1.3.6.1.4.1.9.9.434.1.1.6
Object
This object is used to facilitate modification of
cIpNetworkGigEIfIndexToDiscover,
cIpNetworkInetAddrTypeToDiscover,
cIpNetworkGigEInetAddrToDiscover
and cIpNetworkDiscoveryCommand objects by multiple
managers.
The procedure for modifying the above four objects are
as follows:
1. For interface specific discovery, determine the new
values for cIpNwGigEIfIndexToDiscover,
cIpNetworkInetAddrTypeToDiscover,
cIpNetworkGigEInetAddrToDiscover objects.
2. Retrieve the value of 'cIpNetworkDiscoverySpinLock'
object.
3. Set the value of 'cIpNetworkDiscoverySpinLock'
object to the retrieved value, and (in the same PDU)
the value of 'cIpNetworkGigEIfIndexToDiscover' to
the new value. If the set fails for the
'cIpNetworkDiscoverySpinLock' object, go back to
step 2.
4. Set the value of 'cIpNetworkDiscoverySpinLock'
object to the retrieved value incremented by one, and
(in the same PDU) the value of
'cIpNetworkInetAddrTypeToDiscover' object to the
new value.
5. Set the value of 'cIpNetworkDiscoverySpinLock'
object to the retrieved value incremented by two,
and (in the same PDU) the value of
'cIpNetworkGigEInetAddrToDiscover' object to the
new value.
If the set fails for 'cIpNetworkDiscoverySpinLock'
object go back to step 2.
6. Set the value of 'cIpNetworkDiscoverySpinLock'
object to the retrieved value incremented by four, and
(in the same PDU) the value of
'cIpNetworkDiscoveryCommand' object to
'interfaceSpecific'.
If the set fails for 'cIpNetworkDiscoverySpinLock'
object go back to step 2.
Note that if it's possible to include
'cIpNetworkGigEInetAddrToDiscover' and/or
'cIpNetworkDiscoveryCommand' object in the
(Set Request) PDU of an earlier step, then step 4 (or) 5
(or) 6 can be eliminated.
Context
- MIB
- CISCO-IP-NW-DISCOVERY-MIB
- OID
.1.3.6.1.4.1.9.9.434.1.1.6- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- cIpNetworkDiscoveryConfig
- Siblings
- 10
Values & Constraints
Type Constraints
range: 0..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cIpNetworkAutomaticDiscovery This object indicates whether the automatic discovery
to find the reachability on the IP networks is enabled
or not in the system.
If automatic discovery is not enabl… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.434.1.1.1 |
| cIpNetworkDiscoveryCommand The IP network discovery command to be executed.
Command Remarks
all Run IP network discovery for all the
… | scalar | Enumeration | .1.3.6.1.4.1.9.9.434.1.1.10 |
| cIpNetworkDiscoveryCmdStatus The status of the last IP network discovery command
operation.
success (1) - IP network discovery operation completed
successfully.
none (2) … | scalar | Enumeration | .1.3.6.1.4.1.9.9.434.1.1.11 |
| cIpNetworkDiscoveryDelay This object indicates the time duration between the
state change of an IP interface and the start of
discovery operation of interface, if Automatic
discovery is configured as 't… | scalar | seconds Integer32 | .1.3.6.1.4.1.9.9.434.1.1.2 |
| cIpNetworkDiscoveryTypeSpinLock This object is used to facilitate modification of
cIpNetworkDiscoverType, cIpNetworkDiscoverPort
objects by multiple managers.
The procedure for modifying the above two… | scalar | SNMPv2-TCTestAndIncr | .1.3.6.1.4.1.9.9.434.1.1.3 |
| cIpNetworkDiscoveryType This object indicates type of discovery packets to
be sent for carrying out the IP network discovery. | scalar | Enumeration | .1.3.6.1.4.1.9.9.434.1.1.4 |
| cIpNetworkDiscoveryPort This object indicates TCP/UDP port used for of IP network
discovery operation, if the cIpNetworkDiscoveryType
object is set to 'tcp' or 'udp'. | scalar | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.9.9.434.1.1.5 |
| cIpNetworkGigEIfIndexToDiscover This object represents the 'ifIndex' of the specified
gigabit ethernet interface for which the IP network
discovery needs to be done incrementally.
This object MUST b… | scalar | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.9.9.434.1.1.7 |
| cIpNetworkInetAddrTypeToDiscover This object represents the 'InetAddressType' of the
address of the Gigabit ethernet port on which to
perform the discovery.
This object MUST be set to a valid value be… | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.434.1.1.8 |
| cIpNetworkGigEInetAddrToDiscover This object represents the 'InetAddress' of the specified
gigabit ethernet interface specified in the
'cIpNetworkGigEIfIndexToDiscover' for which the IP
network discovery needs t… | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.434.1.1.9 |