cds1StatisticalAlarmSeverity – CISCO-DS1-EXT-MIB

Object

column r/w Enumeration

This variable is used to setup the severity of any of the
Statistical alarms. So when a Statistical Counter exceeds its
specified threshold, the system will send the alarm with
appropriate severity. A value of none(3) indicates that no
alarm will be raised.

Context

MIB: CISCO-DS1-EXT-MIB
OID: .1.3.6.1.4.1.9.9.229.1.2.2.1.1
Type: column
Access: readwrite
Status: current
Parent: cds1AlarmConfigEntry
Table: cds1AlarmConfigTable
Siblings: 5

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	minor
`2`	major
`3`	none

Related Objects

Sibling Objects

Object	Type	Syntax	OID
cds1StatisticalAlarmState This is a bitmap of the DS1 Line Statistical alarms. A clear bitmap (i.e. no bit is set) will indicate that no alarms are present. The values of individual bits mea…	column	Bits	`.1.3.6.1.4.1.9.9.229.1.2.2.1.2`
cds1AlarmUpCount This parameter specifies the increment to the Near End alarm integration counters. The local alarms are LOS and LOF. The integration counter is incremented by this value every 100…	column	Integer32	`.1.3.6.1.4.1.9.9.229.1.2.2.1.3`
cds1AlarmDownCount This parameter specifies the decrement to the Near End alarm integration counters. The alarms are LOS and LOF. The integration counter is decremented by this value every 100 ms …	column	Integer32	`.1.3.6.1.4.1.9.9.229.1.2.2.1.4`
cds1AlarmThreshold The value set in this object determines the value that the alarm integration counter must reach for an near end alarm to be declared. If the up count is 6, and the threshold 150,…	column	Integer32	`.1.3.6.1.4.1.9.9.229.1.2.2.1.5`
cds1AlarmThresholdActiveGroup The value of this object identifies the row in the cds1AlarmThresholdGroupTable which contains the threshold values for different statistics, and is currently active.	column	Integer32	`.1.3.6.1.4.1.9.9.229.1.2.2.1.6`