moipIPOConfigSendSAP
CISCO-DMN-DSG-MOIP-MIB ·
.1.3.6.1.4.1.1429.2.2.5.35.1.1.1.13
Object
column
r/w
Enumeration
Send SAP Messages.
Context
- MIB
- CISCO-DMN-DSG-MOIP-MIB
- OID
.1.3.6.1.4.1.1429.2.2.5.35.1.1.1.13- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- moipIPOConfigEntry
- Table
- moipIPOConfigTable
- Siblings
- 26
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | none |
2 | rfc2327 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| moipIPOConfigID MPEG Over IP Output Instance ID . | column | Integer32 | .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.1 |
| moipIPOConfigMinIPPerSec Minimum Number of IP Packets to be sent per second. | column | Integer32 | .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.10 |
| moipIPOConfigPCRAddition Program Clock Reference Addition.
This OID is read only on D9824, D9854-i and D9859 | column | Enumeration | .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.11 |
| moipIPOConfigPCRStartNewPkt Enabling new Ethernet Packet when new
Program Clock Reference arrives. | column | Enumeration | .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.12 |
| moipIPOConfigUseSAPStr User Configured SAP String or PE1 SDT Channel name
as the Transport Name in the SAP. | column | Enumeration | .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.14 |
| moipIPOConfigMaxTransPktPerIP Maximum Number of Transport Packets per IP Packet. | column | Integer32 | .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.15 |
| moipIPOConfigSAPStr User configured Session Announcement Protocol Transport
Name to be used when DPMIPOConfigUseSAPStr is set to 'YES'. | column | OctetString | .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.16 |
| moipIPOConfigInterfaceMode MPEG Over IP Output port selection. | column | Enumeration | .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.17 |
| moipIPOConfigBitRate Maxmum ASI output rate in Mbps with scaling factor of 6. | column | Integer32 | .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.18 |
| moipIPOConfigTOS TOS field in IP header. This is an 8 bits field divided
into 5 sub-fields namely Precedence, D, T, R and Unused. | column | Integer32 | .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.19 |
| moipIPOConfigOutputEnabled MPEG Over IP Output is enabled. | column | Enumeration | .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.2 |
| moipIPOConfigTTL Time to live. This is an 8 bits fiels that defines how
many hops an IP datagram can travel through. | column | Integer32 | .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.20 |
| moipIPOConfigSAPDestPort SAP Destination Port Number. | column | Integer32 | .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.21 |
| moipIPOFECMode FEC Mode. | column | Enumeration | .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.22 |
| moipIPOFECColDepth FEC Column Depth (L Value). | column | Integer32 | .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.23 |
| moipIPOFECRowWidth FEC Row Width (D Value). | column | Integer32 | .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.24 |
| moipIPOAnnexType FEC arrangement : Non block-aligned (Annex A in Pro-MPEG FEC,
Annex B in SMPTE 2022), Block-aligned (Annex B in Pro-MPEG FEC,
Annex C in SMPTE-2022). | column | Enumeration | .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.25 |
| moipIPOFEC1UDPPort UDP Port for FEC Columns Stream in step of 2. | column | Integer32 | .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.26 |
| moipIPOFEC2UDPPort UDP Port for FEC Rows Stream in step of 2. | column | Integer32 | .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.27 |
| moipIPOConfigInstanceName MPEG Over IP Output Name. | column | OctetString | .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.3 |
| moipIPOConfigTPProtocol Transport Protocol to be used: UDP/ RPT. | column | Enumeration | .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.4 |
| moipIPOConfigIPVer Internet Protocol version of the destination
IP address:IPv4/IPv6. | column | OctetString | .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.5 |
| moipIPOConfigDestIPAddr MPEG Over IP Destination IP Address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.6 |
| moipIPOConfigSAPMulticastIPAddr MPEG Over IP Destination IP Address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.7 |
| moipIPOConfigDestPort Source UDP Port - 0 allows automatic Port Selection,
enter a value to override.. | column | Integer32 | .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.8 |
| moipIPOConfigSrcPort Source UDP Port - 0 allows automatic Port Selection,
enter a value to override.. | column | Integer32 | .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.9 |