moipIPOAnnexType

CISCO-DMN-DSG-MOIP-MIB · .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.25

Object

column r/w Enumeration

FEC arrangement : Non block-aligned (Annex A in Pro-MPEG FEC, 
Annex B in SMPTE 2022), Block-aligned (Annex B in Pro-MPEG FEC, 
Annex C in SMPTE-2022).

Context

MIB: CISCO-DMN-DSG-MOIP-MIB
OID: .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.25
Type: column
Access: readwrite
Status: current
Parent: moipIPOConfigEntry
Table: moipIPOConfigTable
Siblings: 26

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	annexA
`2`	annexB

Related Objects

Sibling Objects

Object	Type	Syntax	OID
moipIPOConfigID MPEG Over IP Output Instance ID .	column	Integer32	`.1.3.6.1.4.1.1429.2.2.5.35.1.1.1.1`
moipIPOConfigMinIPPerSec Minimum Number of IP Packets to be sent per second.	column	Integer32	`.1.3.6.1.4.1.1429.2.2.5.35.1.1.1.10`
moipIPOConfigPCRAddition Program Clock Reference Addition. This OID is read only on D9824, D9854-i and D9859	column	Enumeration	`.1.3.6.1.4.1.1429.2.2.5.35.1.1.1.11`
moipIPOConfigPCRStartNewPkt Enabling new Ethernet Packet when new Program Clock Reference arrives.	column	Enumeration	`.1.3.6.1.4.1.1429.2.2.5.35.1.1.1.12`
moipIPOConfigSendSAP Send SAP Messages.	column	Enumeration	`.1.3.6.1.4.1.1429.2.2.5.35.1.1.1.13`
moipIPOConfigUseSAPStr User Configured SAP String or PE1 SDT Channel name as the Transport Name in the SAP.	column	Enumeration	`.1.3.6.1.4.1.1429.2.2.5.35.1.1.1.14`
moipIPOConfigMaxTransPktPerIP Maximum Number of Transport Packets per IP Packet.	column	Integer32	`.1.3.6.1.4.1.1429.2.2.5.35.1.1.1.15`
moipIPOConfigSAPStr User configured Session Announcement Protocol Transport Name to be used when DPMIPOConfigUseSAPStr is set to 'YES'.	column	OctetString	`.1.3.6.1.4.1.1429.2.2.5.35.1.1.1.16`
moipIPOConfigInterfaceMode MPEG Over IP Output port selection.	column	Enumeration	`.1.3.6.1.4.1.1429.2.2.5.35.1.1.1.17`
moipIPOConfigBitRate Maxmum ASI output rate in Mbps with scaling factor of 6.	column	Integer32	`.1.3.6.1.4.1.1429.2.2.5.35.1.1.1.18`
moipIPOConfigTOS TOS field in IP header. This is an 8 bits field divided into 5 sub-fields namely Precedence, D, T, R and Unused.	column	Integer32	`.1.3.6.1.4.1.1429.2.2.5.35.1.1.1.19`
moipIPOConfigOutputEnabled MPEG Over IP Output is enabled.	column	Enumeration	`.1.3.6.1.4.1.1429.2.2.5.35.1.1.1.2`
moipIPOConfigTTL Time to live. This is an 8 bits fiels that defines how many hops an IP datagram can travel through.	column	Integer32	`.1.3.6.1.4.1.1429.2.2.5.35.1.1.1.20`
moipIPOConfigSAPDestPort SAP Destination Port Number.	column	Integer32	`.1.3.6.1.4.1.1429.2.2.5.35.1.1.1.21`
moipIPOFECMode FEC Mode.	column	Enumeration	`.1.3.6.1.4.1.1429.2.2.5.35.1.1.1.22`
moipIPOFECColDepth FEC Column Depth (L Value).	column	Integer32	`.1.3.6.1.4.1.1429.2.2.5.35.1.1.1.23`
moipIPOFECRowWidth FEC Row Width (D Value).	column	Integer32	`.1.3.6.1.4.1.1429.2.2.5.35.1.1.1.24`
moipIPOFEC1UDPPort UDP Port for FEC Columns Stream in step of 2.	column	Integer32	`.1.3.6.1.4.1.1429.2.2.5.35.1.1.1.26`
moipIPOFEC2UDPPort UDP Port for FEC Rows Stream in step of 2.	column	Integer32	`.1.3.6.1.4.1.1429.2.2.5.35.1.1.1.27`
moipIPOConfigInstanceName MPEG Over IP Output Name.	column	OctetString	`.1.3.6.1.4.1.1429.2.2.5.35.1.1.1.3`
moipIPOConfigTPProtocol Transport Protocol to be used: UDP/ RPT.	column	Enumeration	`.1.3.6.1.4.1.1429.2.2.5.35.1.1.1.4`
moipIPOConfigIPVer Internet Protocol version of the destination IP address:IPv4/IPv6.	column	OctetString	`.1.3.6.1.4.1.1429.2.2.5.35.1.1.1.5`
moipIPOConfigDestIPAddr MPEG Over IP Destination IP Address.	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.1429.2.2.5.35.1.1.1.6`
moipIPOConfigSAPMulticastIPAddr MPEG Over IP Destination IP Address.	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.1429.2.2.5.35.1.1.1.7`
moipIPOConfigDestPort Source UDP Port - 0 allows automatic Port Selection, enter a value to override..	column	Integer32	`.1.3.6.1.4.1.1429.2.2.5.35.1.1.1.8`
moipIPOConfigSrcPort Source UDP Port - 0 allows automatic Port Selection, enter a value to override..	column	Integer32	`.1.3.6.1.4.1.1429.2.2.5.35.1.1.1.9`