linkFailureSignalOrSyncLoss
CISCO-CHANNEL-MIB ·
.1.3.6.1.4.1.9.9.20.1.2.1.8
Object
column
SNMPv2-SMICounter32
The number of link failures recognized as a result of a loss of signal or loss of synchronization that persisted longer than the link interval duration, the link interval duration is one second with a tolerance of +1.5 seconds and -0 seconds.
Context
- MIB
- CISCO-CHANNEL-MIB
- OID
.1.3.6.1.4.1.9.9.20.1.2.1.8- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cipCardDaughterBoardEntry
- Table
- cipCardDaughterBoardTable
- Siblings
- 16
Syntax
SNMPv2-SMICounter32
- Source
- SNMPv2-SMICounter32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cipCardDtrBrdIndex This indicates which daughter board is
is being referenced for a particular CMCC card. | column | Integer32 | .1.3.6.1.4.1.9.9.20.1.2.1.1 |
| linkFailureSequenceTimeouts The number of link failures recognized as a result of
a connection recovery timeout or response timeout
occurring while in transmit OLS state. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.20.1.2.1.10 |
| linkFailureInvalidSequences The number of link failures recognized as a result of
an invalid sequence for Link-Level-Facility State.
Either a UD or UDR sequence was recognized while in
wait-for-offline-seque… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.20.1.2.1.11 |
| linkIncidentTrapCause This indicates the reason for the last link
failure.
liStatus indicates that the daughter board status
has changed.
liImplicitIncident indicates that… | column | Enumeration | .1.3.6.1.4.1.9.9.20.1.2.1.12 |
| cipCardDtrBrdLastStat This object indicates how old the statistics are. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.9.9.20.1.2.1.13 |
| cipCardDtrBrdNextStat This object indicates when statistics will next
be read. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.9.9.20.1.2.1.14 |
| cipCardDtrBrdChannelLoad1m The average, over the last minute, of the
percentage of time the channel adapter was
busy communicating to a host. | column | percent Integer32 | .1.3.6.1.4.1.9.9.20.1.2.1.15 |
| cipCardDtrBrdChannelLoad5m The average, over the last 5 minutes, of the
percentage of time the channel adapter was
busy communicating to a host. | column | percent Integer32 | .1.3.6.1.4.1.9.9.20.1.2.1.16 |
| cipCardDtrBrdChannelLoad60m The average, over the last 60 minutes, of the
percentage of time the channel adapter was
busy communicating to a host. | column | percent Integer32 | .1.3.6.1.4.1.9.9.20.1.2.1.17 |
| cipCardDtrBrdType This indicates the channel path interface type. | column | Enumeration | .1.3.6.1.4.1.9.9.20.1.2.1.2 |
| cipCardDtrBrdStatus cipCardDtrBrdStatus is true when the
microcode for the daughter board has been
successfully loaded and is executing, false
otherwise. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.20.1.2.1.3 |
| cipCardDtrBrdSignal For ESCON, cipCardDtrBrdSignal is true when
light has been seen on the fiber and synchronization
has been established, false otherwise.
For the Parallel Channel A… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.20.1.2.1.4 |
| cipCardDtrBrdOnline For ESCON, cipCardDtrBrdOnline is true when a path
has been established with at least one channel,
false otherwise.
For PCA, cipCardDtrBrdOnline is true when the P… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.20.1.2.1.5 |
| implicitIncidents This counts the number of times the ESCON Processor
recovers from an internal error. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.20.1.2.1.6 |
| codeViolationErrors The number of recognized code-violation errors.
A trap is issued when this number exceeds the bit
error rate threshold for ESCON. The bit
error rate threshold is set at 15 error … | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.20.1.2.1.7 |
| linkFailureNOSs The number of link failures recognized as a result of
the not-operational sequence (NOS). | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.20.1.2.1.9 |