cipCardSubChannelStatPending
CISCO-CHANNEL-MIB ·
.1.3.6.1.4.1.9.9.20.1.3.1.16
Object
column
SNMPv2-TCTruthValue
Indicates that the CMCC has status to present for a particular device. The indication is cleared when the mainframe excepts the status.
Context
- MIB
- CISCO-CHANNEL-MIB
- OID
.1.3.6.1.4.1.9.9.20.1.3.1.16- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cipCardSubChannelEntry
- Table
- cipCardSubChannelTable
- Siblings
- 17
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cipCardSubChannelIndex This indicates which subchannel is being referenced
for a particular daughter board on a CMCC card.
This value is constructed as follows:
path * 256 + device
Path and device are… | column | Integer32 | .1.3.6.1.4.1.9.9.20.1.3.1.1 |
| cipCardSubChannelCuBusies This is the number of control unit busies sent to the
channel when this device was requested. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.20.1.3.1.10 |
| cipCardSubChannelCmdRetries Number of times the subchannel went into command
retry state. The sum of this value and
cipCardSubChannelConnections gives
the number of start subchannels. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.20.1.3.1.11 |
| cipCardSubChannelResetEvent A state that a device gets into after a system reset
and is cleared by a resetting event unit check. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.20.1.3.1.12 |
| cipCardSubChannelShortBusy A transient state that a device can get into during
processing of various resets. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.20.1.3.1.13 |
| cipCardSubChannelCMDRetry A state that a device can get into if the mainframe
tries to write data to the CMCC when the CMCC has no
buffers for it or if the mainframe performs a read
operation and the CMC… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.20.1.3.1.14 |
| cipCardSubChannelBufferWait A state that a device can get into when the mainframe
tries to write data to the CMCC and the CMCC has no
buffers for all of the write operation. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.20.1.3.1.15 |
| cipCardSubChannelSuspend Indicates that the device task has decided to suspend data
transfer for a particular device. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.20.1.3.1.17 |
| cipCardSubChannelFBLWait A state that a device can get into when the mainframe
tries to write data to the CMCC and the CMCC has no buffers
for all of the write operation. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.20.1.3.1.18 |
| cipCardSubChannelConnections Number of times a device was connected to the
subchannel. For some devices, this correlates with
the number of start subchannels. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.20.1.3.1.2 |
| cipCardSubChannelCancels Number of halt subchannels. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.20.1.3.1.3 |
| cipCardSubChannelSelectiveResets Number of selective resets. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.20.1.3.1.4 |
| cipCardSubChannelSystemResets Number of system resets. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.20.1.3.1.5 |
| cipCardSubChannelDeviceErrors Number of device level errors. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.20.1.3.1.6 |
| cipCardSubChannelWriteBlocksDropped Number of times a block was received by the channel
and a router buffer was not available so the block
was discarded. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.20.1.3.1.7 |
| cipCardSubChannelLastSenseData This is the last sense data sent to the channel
by this device. | column | OctetString | .1.3.6.1.4.1.9.9.20.1.3.1.8 |
| cipCardSubChannelLastSenseDataTime This indicates the time when the last sense data
was sent to the channel by this device. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.9.20.1.3.1.9 |