cCdmaAhdlcPhysicalIndex
CISCO-CDMA-AHDLC-MIB ·
.1.3.6.1.4.1.9.9.997.1.1.1.1.10
Object
column
CISCO-TCEntPhysicalIndexOrZero
Corresponding AHDLC service adapter entry in the ENTITY-MIB (RFC-2737). This object value should return the corresponding entPhysicalIndex value of the service adapter or 0 if it cannot be determined or is not applicable.
Context
- MIB
- CISCO-CDMA-AHDLC-MIB
- OID
.1.3.6.1.4.1.9.9.997.1.1.1.1.10- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cCdmaAhdlcEngineEntry
- Table
- cCdmaAhdlcEngineTable
- Siblings
- 9
Values & Constraints
Type Constraints
range: 0..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cCdmaAhdlcEngineIndex An arbitrary non-zero integer-value that uniquely
identifies an AHDLC engine. An implementation should
assign AHDLC engines consecutive monotonically
increasing values. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.997.1.1.1.1.1 |
| cCdmaAhdlcEngineName Textual name of the AHDLC engine. The value of this
object should be the name of the component as
assigned by the local device. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.997.1.1.1.1.2 |
| cCdmaAhdlcEngineType AHDLC engine type. Three main types are defined:
- a 'hardware' based engine requires the use of
AHDLC hardware assist. Each hardware based engine is
peer to one … | column | Enumeration | .1.3.6.1.4.1.9.9.997.1.1.1.1.3 |
| cCdmaAhdlcEngineChannelsInUse Number of current active channels handled by this
engine. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.997.1.1.1.1.4 |
| cCdmaAhdlcEngineMaxChannels Maximum number of channels that can be supported
by this engine. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.997.1.1.1.1.5 |
| cCdmaAhdlcEngineConfMaxChannels Maximum number of channels configured by the user.
This value may not be higher than
cCdmaAhdlcEngineMaxChannels. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.997.1.1.1.1.6 |
| cCdmaAhdlcEngineOperState This object defines the current AHDLC engine
operational state. The 'up' indicates the engine
is ready to receive ahdlc packets.
If cCdmaAhdlcEngineAdminState is 'down' then
cCdm… | column | Enumeration | .1.3.6.1.4.1.9.9.997.1.1.1.1.7 |
| cCdmaAhdlcEngineAdminState This object defines the AHDLC engine desired
state. When a managed system initializes, all
interfaces start with 'down' state. As a result
of either explicit management action o… | column | Enumeration | .1.3.6.1.4.1.9.9.997.1.1.1.1.8 |
| cCdmaAhdlcEngineDownNotifEnabled 'true' indicates notification will be sent out
when cCdmaAhdlcEngineAdminState is 'up' and
cCdmaAhdlcEngineOperState is 'down'. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.997.1.1.1.1.9 |