caqMacPktClassifyVlansLow
CISCO-CATOS-ACL-QOS-MIB ·
.1.3.6.1.4.1.9.9.179.1.1.10
Object
scalar
r/w
OctetString
A string of octets containing one bit per VLAN for
VLANs with VlanIndex value of 0 to 2047. The first
octet corresponds to VLANs with VlanIndex values
of 0 through 7; the second octet to VLANs 8 through
15; etc. The most significant bit of each octet
corresponds to the lowest value VlanIndex in that octet.
For each VLAN, if Ethernet packet classify feature is
enabled then the bit corresponding to that VLAN is set
to '1'.
Note that if the length of this string is less than
256 octets, any 'missing' octets are assumed to contain
the value zero. A NMS may omit any zero-valued octets
from the end of this string in order to reduce SetPDU size,
and the agent may also omit zero-valued trailing octets,
to reduce the size of GetResponse PDUs.
Context
- MIB
- CISCO-CATOS-ACL-QOS-MIB
- OID
.1.3.6.1.4.1.9.9.179.1.1.10- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- caqGlobalObjects
- Siblings
- 10
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-256
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| caqCosToDscpTable This table contains the mapping of Cos values to DSCP values.
This map is used to associate the Cos of packets arriving at a
port to a DSCP where the port's trust state is trustCo… | table | - | .1.3.6.1.4.1.9.9.179.1.1.1 |
| caqMacPktClassifyVlansHigh A string of octets containing one bit per VLAN for
VLANs with VlanIndex value of 2048 to 4095. The first
octet corresponds to VLANs with VlanIndex values
of 2048 through 2055; the… | scalar | OctetString | .1.3.6.1.4.1.9.9.179.1.1.11 |
| caqIpPrecToDscpTable This table contains the mapping of IP Precedence to DSCP.
This map is used to associate the IP Precedence of IP packets
arriving at a port to a DSCP where the port's trust state i… | table | - | .1.3.6.1.4.1.9.9.179.1.1.2 |
| caqDscpMappingTable This table always has 64 entries, one for each DSCP value. The
table contains three mappings from the DSCP value assigned to
a packet. One mapping is to the egress CoS to be store… | table | - | .1.3.6.1.4.1.9.9.179.1.1.3 |
| caqCosAssignmentTable This table provides the information for and configuration of
assigning packets to queues and thresholds based on their CoS
value. | table | - | .1.3.6.1.4.1.9.9.179.1.1.4 |
| caqQueueThresholdTable This table maintains threshold parameters for the specified
queue number and threshold number of a port type. | table | - | .1.3.6.1.4.1.9.9.179.1.1.5 |
| caqQueueTable A table used to configure the WRR (weighted round robin)
weights for queues and the ratio of memory buffer allocation
for each queue. It only contains entries for the specific por… | table | - | .1.3.6.1.4.1.9.9.179.1.1.6 |
| caqDscpMutationMapTable The table provides the DSCP mutation mapping configuration
on the device. This table is only instantiated if DSCP
Mutation is supported by the device. | table | - | .1.3.6.1.4.1.9.9.179.1.1.7 |
| caqVlanMutationIdMapTable The table provides the VLAN to mutation table mapping
configuration on the device. This table is only
instantiated if DSCP Mutation is supported by the
device. | table | - | .1.3.6.1.4.1.9.9.179.1.1.8 |
| caqDscpRewriteEnabled Indicates whether DSCP rewrite is enabled or disabled
in the device.
if true(1), all outgoing packets will have their DSCP
value rewrited based on the result of classi… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.179.1.1.9 |