caqIpPrecToDscpTable

CISCO-CATOS-ACL-QOS-MIB · .1.3.6.1.4.1.9.9.179.1.1.2

MIB view Table view

Object

table

This table contains the mapping of IP Precedence to DSCP.
This map is used to associate the IP Precedence of IP packets
arriving at a port to a DSCP where the port's trust state is 
trustIpPrec(3).  This map is a table of eight IpPrecedence
values (0 through 7) and their corresponding DSCP values. 
This mapping applies to every port on the device.

Context

MIB: CISCO-CATOS-ACL-QOS-MIB
OID: .1.3.6.1.4.1.9.9.179.1.1.2
Type: table
Status: current
Parent: caqGlobalObjects
Siblings: 10
Children: 1

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
caqCosToDscpTable This table contains the mapping of Cos values to DSCP values. This map is used to associate the Cos of packets arriving at a port to a DSCP where the port's trust state is trustCo…	table	-	`.1.3.6.1.4.1.9.9.179.1.1.1`
caqMacPktClassifyVlansLow A string of octets containing one bit per VLAN for VLANs with VlanIndex value of 0 to 2047. The first octet corresponds to VLANs with VlanIndex values of 0 through 7; the second o…	scalar	OctetString	`.1.3.6.1.4.1.9.9.179.1.1.10`
caqMacPktClassifyVlansHigh A string of octets containing one bit per VLAN for VLANs with VlanIndex value of 2048 to 4095. The first octet corresponds to VLANs with VlanIndex values of 2048 through 2055; the…	scalar	OctetString	`.1.3.6.1.4.1.9.9.179.1.1.11`
caqDscpMappingTable This table always has 64 entries, one for each DSCP value. The table contains three mappings from the DSCP value assigned to a packet. One mapping is to the egress CoS to be store…	table	-	`.1.3.6.1.4.1.9.9.179.1.1.3`
caqCosAssignmentTable This table provides the information for and configuration of assigning packets to queues and thresholds based on their CoS value.	table	-	`.1.3.6.1.4.1.9.9.179.1.1.4`
caqQueueThresholdTable This table maintains threshold parameters for the specified queue number and threshold number of a port type.	table	-	`.1.3.6.1.4.1.9.9.179.1.1.5`
caqQueueTable A table used to configure the WRR (weighted round robin) weights for queues and the ratio of memory buffer allocation for each queue. It only contains entries for the specific por…	table	-	`.1.3.6.1.4.1.9.9.179.1.1.6`
caqDscpMutationMapTable The table provides the DSCP mutation mapping configuration on the device. This table is only instantiated if DSCP Mutation is supported by the device.	table	-	`.1.3.6.1.4.1.9.9.179.1.1.7`
caqVlanMutationIdMapTable The table provides the VLAN to mutation table mapping configuration on the device. This table is only instantiated if DSCP Mutation is supported by the device.	table	-	`.1.3.6.1.4.1.9.9.179.1.1.8`
caqDscpRewriteEnabled Indicates whether DSCP rewrite is enabled or disabled in the device. if true(1), all outgoing packets will have their DSCP value rewrited based on the result of classi…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.179.1.1.9`

Child Objects