caqDscpMappingTable
CISCO-CATOS-ACL-QOS-MIB ·
.1.3.6.1.4.1.9.9.179.1.1.3
Object
table
This table always has 64 entries, one for each DSCP value. The table contains three mappings from the DSCP value assigned to a packet. One mapping is to the egress CoS to be stored in the layer-2 frame headers for output on 802.1Q or ISL interfaces. The other two mappings are to the remarked (or 'marked down') DSCP values which are used when a policer's requires that a packet's DSCP value to be modified. Of these two mappings, one is for a Normal Rate policer, and the other is for an Excess Rate policer. These mappings apply for every port on the device.
Context
- MIB
- CISCO-CATOS-ACL-QOS-MIB
- OID
.1.3.6.1.4.1.9.9.179.1.1.3- Type
- table
- Status
- current
- Parent
- caqGlobalObjects
- Siblings
- 10
- Children
- 1
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| caqCosToDscpTable This table contains the mapping of Cos values to DSCP values.
This map is used to associate the Cos of packets arriving at a
port to a DSCP where the port's trust state is trustCo… | table | - | .1.3.6.1.4.1.9.9.179.1.1.1 |
| caqMacPktClassifyVlansLow A string of octets containing one bit per VLAN for
VLANs with VlanIndex value of 0 to 2047. The first
octet corresponds to VLANs with VlanIndex values
of 0 through 7; the second o… | scalar | OctetString | .1.3.6.1.4.1.9.9.179.1.1.10 |
| caqMacPktClassifyVlansHigh A string of octets containing one bit per VLAN for
VLANs with VlanIndex value of 2048 to 4095. The first
octet corresponds to VLANs with VlanIndex values
of 2048 through 2055; the… | scalar | OctetString | .1.3.6.1.4.1.9.9.179.1.1.11 |
| caqIpPrecToDscpTable This table contains the mapping of IP Precedence to DSCP.
This map is used to associate the IP Precedence of IP packets
arriving at a port to a DSCP where the port's trust state i… | table | - | .1.3.6.1.4.1.9.9.179.1.1.2 |
| caqCosAssignmentTable This table provides the information for and configuration of
assigning packets to queues and thresholds based on their CoS
value. | table | - | .1.3.6.1.4.1.9.9.179.1.1.4 |
| caqQueueThresholdTable This table maintains threshold parameters for the specified
queue number and threshold number of a port type. | table | - | .1.3.6.1.4.1.9.9.179.1.1.5 |
| caqQueueTable A table used to configure the WRR (weighted round robin)
weights for queues and the ratio of memory buffer allocation
for each queue. It only contains entries for the specific por… | table | - | .1.3.6.1.4.1.9.9.179.1.1.6 |
| caqDscpMutationMapTable The table provides the DSCP mutation mapping configuration
on the device. This table is only instantiated if DSCP
Mutation is supported by the device. | table | - | .1.3.6.1.4.1.9.9.179.1.1.7 |
| caqVlanMutationIdMapTable The table provides the VLAN to mutation table mapping
configuration on the device. This table is only
instantiated if DSCP Mutation is supported by the
device. | table | - | .1.3.6.1.4.1.9.9.179.1.1.8 |
| caqDscpRewriteEnabled Indicates whether DSCP rewrite is enabled or disabled
in the device.
if true(1), all outgoing packets will have their DSCP
value rewrited based on the result of classi… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.179.1.1.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| caqDscpMappingEntry Each row contains the mapping from DSCP value to CoS value
and policed DSCP. | row | - | .1.3.6.1.4.1.9.9.179.1.1.3.1 |