caqAclObjects
CISCO-CATOS-ACL-QOS-MIB ·
.1.3.6.1.4.1.9.9.179.1.3
Object
node
No description available.
Context
- MIB
- CISCO-CATOS-ACL-QOS-MIB
- OID
.1.3.6.1.4.1.9.9.179.1.3- Type
- node
- Parent
- ciscoCatOSAclQosMIBObjects
- Siblings
- 9
- Children
- 15
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| caqGlobalObjects | node | - | .1.3.6.1.4.1.9.9.179.1.1 |
| caqDownloadAclObjects | node | - | .1.3.6.1.4.1.9.9.179.1.10 |
| caqInterfaceObjects | node | - | .1.3.6.1.4.1.9.9.179.1.2 |
| caqQosStatsObjects | node | - | .1.3.6.1.4.1.9.9.179.1.4 |
| caqExtObjects | node | - | .1.3.6.1.4.1.9.9.179.1.5 |
| caqPbfObjects | node | - | .1.3.6.1.4.1.9.9.179.1.6 |
| caqLoggingObjects | node | - | .1.3.6.1.4.1.9.9.179.1.7 |
| caqArpInspObjects | node | - | .1.3.6.1.4.1.9.9.179.1.8 |
| caqAclHitCountObjects | node | - | .1.3.6.1.4.1.9.9.179.1.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| caqAclCapabilities Indicates what ACL capabilities are supported on the device.
An ACL belongs to one of the following types: IP, IPX and MAC.
Furthermore, an ACL can be used for either QoS or Secur… | scalar | Bits | .1.3.6.1.4.1.9.9.179.1.3.1 |
| caqSecurityAclCaptureIfTable This table contains all the physical ports which are capable
of being capture interfaces on which captured packets are
output. | table | - | .1.3.6.1.4.1.9.9.179.1.3.10 |
| caqFlowPolicerExcessBurstSupport Indicates whether the device supports excess burst
size configuration. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.179.1.3.11 |
| caqSecurityRateLimitFeatures Indicates the features which implement rate limit
on their traffic flows using the rate limit value
denoted by caqSecurityAclRateLimit object. This
rate limit value is shared amo… | scalar | Bits | .1.3.6.1.4.1.9.9.179.1.3.12 |
| caqSecurityAclRateLimit Indicates the maximum rate of all traffic flows
subjected to rate limiting imposed by all features
denoted by caqSecurityRateLimitFeatures object. | scalar | packet per second SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.179.1.3.13 |
| caqQosDefaultActionTable This table contains the QoS default action taken by the
device for traffic which is not matched by a specific
QoS ACE. | table | - | .1.3.6.1.4.1.9.9.179.1.3.14 |
| caqAclFeatureCpb Indicates the set of features that the device supports
related to ACLs configured in the device.
vlanAclHitCount(0) indicates that the device supports
ACL hit count f… | scalar | Bits | .1.3.6.1.4.1.9.9.179.1.3.15 |
| caqIpAceTable This table contains a list of IP ACEs. Each ACE consists of
a filter specification and behavior associated with it which
describes what action to carry out on packets which match.… | table | - | .1.3.6.1.4.1.9.9.179.1.3.2 |
| caqIpxAceTable This table contains a list of IPX ACEs. Each ACE consists of
a filter specification and behavior associated with it which
describes what action to carry out on packets which match… | table | - | .1.3.6.1.4.1.9.9.179.1.3.3 |
| caqMacAceTable This table contains a list of MAC ACEs. Each ACE consists of
a filter specification and behavior associated with it which
describes what action to carry out on packets which match… | table | - | .1.3.6.1.4.1.9.9.179.1.3.4 |
| caqFlowPolicingCpb Indicates the flow policing capability of the device.
microFlow(0) indicates that microflow can be policed.
aggregate(1) indicates that aggregate flow can be… | scalar | Bits | .1.3.6.1.4.1.9.9.179.1.3.5 |
| caqQosActionSelectTable This table describes the actions of ACEs. Once an ACE is
matched, it follows its MatchedAction object to an entry of this
table to get an action for the matching ACE.
An action … | table | - | .1.3.6.1.4.1.9.9.179.1.3.6 |
| caqFlowPolicerExcessRateSupport Indicates whether the device supports excess rate
configuration. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.179.1.3.7 |
| caqFlowPolicerTable This table defines the flow policing rules. A flow policing
rule comprises a rate, burst size and drop-or-mark indication. | table | - | .1.3.6.1.4.1.9.9.179.1.3.8 |
| caqSecurityActionTable This table describes the actions of Security ACEs. Once an ACE
is matched and it can go through an entry of this table to find
the Security action. | table | - | .1.3.6.1.4.1.9.9.179.1.3.9 |