bstunRouteRSAP
CISCO-BSTUN-MIB ·
.1.3.6.1.4.1.9.9.35.1.4.1.1.13
Object
column
Integer32
If bstunRouteType is serialLLC2 then this is the llc2 sap value used for the point-to-point link to the remote partner; if bstunRouteType is ip or serial or serialFrameRelay then this field is 0.
Context
- MIB
- CISCO-BSTUN-MIB
- OID
.1.3.6.1.4.1.9.9.35.1.4.1.1.13- Type
- column
- Access
- readonly
- Status
- current
- Parent
- bstunRouteEntry
- Table
- bstunRouteTable
- Siblings
- 18
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| bstunRouteGroupIndex The index of the BSTUN Group owning this
station. | column | Integer32 | .1.3.6.1.4.1.9.9.35.1.4.1.1.1 |
| bstunRouteRxBytes Count of bytes received from the serial
interface with this station's address. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.35.1.4.1.1.10 |
| bstunRouteTxBytes Count of bytes transmitted at the serial
interface with this station's address. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.35.1.4.1.1.11 |
| bstunRouteDLCI If bstunRouteType is serialFrameRelay or serialLLC2
then this is the frame relay dlci circuit used for
the point-to-point link to the remote partner;
if bstunRouteType is ip or … | column | Integer32 | .1.3.6.1.4.1.9.9.35.1.4.1.1.12 |
| bstunLLC2Priority If bstunRouteType is serialLLC2 then this
is the llc2 priority used for the point-to-point
link to the remote partner;
if bstunRouteType is ip or serial or serialFrameRelay
then… | column | Integer32 | .1.3.6.1.4.1.9.9.35.1.4.1.1.14 |
| bstunRouteBIPPassive Specifies whether the bip peer will wait for an inbound connection
or actively connect to the remote peer. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.35.1.4.1.1.15 |
| bstunRouteBIPLocalPort If bstunRouteType is bip then this is the local port used when
connecting to the remote peer. | column | Integer32 | .1.3.6.1.4.1.9.9.35.1.4.1.1.16 |
| bstunRouteBIPForeignPort If bstunRouteType is bip then this is the for port used to
connect to the remote peer. | column | Integer32 | .1.3.6.1.4.1.9.9.35.1.4.1.1.17 |
| bstunRouteBIPDeviceStatus If bstunRouteType is bip then this indicates the OR bit mask
status of the mapped bisync device:
if no bits are set, indicates t… | column | Bits | .1.3.6.1.4.1.9.9.35.1.4.1.1.18 |
| bstunRouteAPIPHeaderVersion Specifies the tunneling header format to use for APIP:
v0, if set, indicates a 2 byte encapsulation header.
The length of the header is included in the size of
the sent … | column | Enumeration | .1.3.6.1.4.1.9.9.35.1.4.1.1.19 |
| bstunRouteStationAddress The poll address of the station. 256 indicates the ALL parameter
on the STUN ROUTE command, which is the route for all
unrecognized addresses. | column | Integer32 | .1.3.6.1.4.1.9.9.35.1.4.1.1.2 |
| bstunRouteType The type of identification of the remote partner.
If ip then the value is in bstunRouteIP; if serial or
serialDirect then the value is in bstunRouteSerial; if
bip or apip then th… | column | Enumeration | .1.3.6.1.4.1.9.9.35.1.4.1.1.3 |
| bstunRouteIP The ip address of the remote BSTUN partner.
0.0.0.0 if partner address type is not ip. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.9.35.1.4.1.1.4 |
| bstunRouteSerial If bstunRouteType is serial then this is the
serial interface index of the point-to-point
link to the remote partner;
if bstunRouteType is serialDirect then the
partner is in t… | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.9.9.35.1.4.1.1.5 |
| bstunRoutePriority The priority with which this station's traffic will
be routed across the network. | column | Enumeration | .1.3.6.1.4.1.9.9.35.1.4.1.1.6 |
| bstunRoutePeerState The state of the peer connection through the
BSTUN tunnel. | column | Enumeration | .1.3.6.1.4.1.9.9.35.1.4.1.1.7 |
| bstunRouteRxPackets Count of frames received from the serial
interface with this station's address. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.35.1.4.1.1.8 |
| bstunRouteTxPackets Count of frames transmitted at the serial
interface with this station's address. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.35.1.4.1.1.9 |