bstunRouteBIPDeviceStatus
CISCO-BSTUN-MIB ·
.1.3.6.1.4.1.9.9.35.1.4.1.1.18
Object
column
Bits
If bstunRouteType is bip then this indicates the OR bit mask
status of the mapped bisync device:
if no bits are set, indicates that the
bisync device is up and operational.
Bit 0, if set, indicates that the bisync device is
reporting an operation check error.
Bit 2, if set, indicates that the bisync device is
reporting a data check error.
Bit 3, if set, indicates that the bisync device is
reporting an equipment check error.
Bit 4, if set, indicates that the bisync device is
reporting that intervention is required.
Bit 5, if set, indicates that the bisync device is
reporting that a command has been rejected.
Bit 6, if set, indicates that the bisync device is
not responding to polls.
Bit 7, if set, indicates that the bisync device is
now responding to polls and is operational.
Bit 9, if set, indicates that the bisync device is
reporting that is no longer busy.
Bit 10, if set, indicates that the bisync device is
reporting a device unit specify.
Bit 11, if set, indicates that the bisync device is
reporting a busy condition.
Context
- MIB
- CISCO-BSTUN-MIB
- OID
.1.3.6.1.4.1.9.9.35.1.4.1.1.18- Type
- column
- Access
- readonly
- Status
- current
- Parent
- bstunRouteEntry
- Table
- bstunRouteTable
- Siblings
- 18
Syntax
Bits
Values & Constraints
Enumerated Values
0 | operationcheck |
1 | reservedBit1 |
2 | datacheck |
3 | equipmentcheck |
4 | interventionrequired |
5 | commandreject |
6 | deviceinactive |
7 | deviceactive |
8 | reservedBit8 |
9 | deviceend |
10 | unitspecify |
11 | devicebusy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| bstunRouteGroupIndex The index of the BSTUN Group owning this
station. | column | Integer32 | .1.3.6.1.4.1.9.9.35.1.4.1.1.1 |
| bstunRouteRxBytes Count of bytes received from the serial
interface with this station's address. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.35.1.4.1.1.10 |
| bstunRouteTxBytes Count of bytes transmitted at the serial
interface with this station's address. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.35.1.4.1.1.11 |
| bstunRouteDLCI If bstunRouteType is serialFrameRelay or serialLLC2
then this is the frame relay dlci circuit used for
the point-to-point link to the remote partner;
if bstunRouteType is ip or … | column | Integer32 | .1.3.6.1.4.1.9.9.35.1.4.1.1.12 |
| bstunRouteRSAP If bstunRouteType is serialLLC2 then this
is the llc2 sap value used for the point-to-point
link to the remote partner;
if bstunRouteType is ip or serial or serialFrameRelay
the… | column | Integer32 | .1.3.6.1.4.1.9.9.35.1.4.1.1.13 |
| bstunLLC2Priority If bstunRouteType is serialLLC2 then this
is the llc2 priority used for the point-to-point
link to the remote partner;
if bstunRouteType is ip or serial or serialFrameRelay
then… | column | Integer32 | .1.3.6.1.4.1.9.9.35.1.4.1.1.14 |
| bstunRouteBIPPassive Specifies whether the bip peer will wait for an inbound connection
or actively connect to the remote peer. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.35.1.4.1.1.15 |
| bstunRouteBIPLocalPort If bstunRouteType is bip then this is the local port used when
connecting to the remote peer. | column | Integer32 | .1.3.6.1.4.1.9.9.35.1.4.1.1.16 |
| bstunRouteBIPForeignPort If bstunRouteType is bip then this is the for port used to
connect to the remote peer. | column | Integer32 | .1.3.6.1.4.1.9.9.35.1.4.1.1.17 |
| bstunRouteAPIPHeaderVersion Specifies the tunneling header format to use for APIP:
v0, if set, indicates a 2 byte encapsulation header.
The length of the header is included in the size of
the sent … | column | Enumeration | .1.3.6.1.4.1.9.9.35.1.4.1.1.19 |
| bstunRouteStationAddress The poll address of the station. 256 indicates the ALL parameter
on the STUN ROUTE command, which is the route for all
unrecognized addresses. | column | Integer32 | .1.3.6.1.4.1.9.9.35.1.4.1.1.2 |
| bstunRouteType The type of identification of the remote partner.
If ip then the value is in bstunRouteIP; if serial or
serialDirect then the value is in bstunRouteSerial; if
bip or apip then th… | column | Enumeration | .1.3.6.1.4.1.9.9.35.1.4.1.1.3 |
| bstunRouteIP The ip address of the remote BSTUN partner.
0.0.0.0 if partner address type is not ip. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.9.35.1.4.1.1.4 |
| bstunRouteSerial If bstunRouteType is serial then this is the
serial interface index of the point-to-point
link to the remote partner;
if bstunRouteType is serialDirect then the
partner is in t… | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.9.9.35.1.4.1.1.5 |
| bstunRoutePriority The priority with which this station's traffic will
be routed across the network. | column | Enumeration | .1.3.6.1.4.1.9.9.35.1.4.1.1.6 |
| bstunRoutePeerState The state of the peer connection through the
BSTUN tunnel. | column | Enumeration | .1.3.6.1.4.1.9.9.35.1.4.1.1.7 |
| bstunRouteRxPackets Count of frames received from the serial
interface with this station's address. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.35.1.4.1.1.8 |
| bstunRouteTxPackets Count of frames transmitted at the serial
interface with this station's address. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.35.1.4.1.1.9 |