caviRowStatus
CISCO-ATM-VIRTUAL-IF-MIB ·
.1.3.6.1.4.1.9.9.129.1.1.1.1.9
Object
This object allows create and delete operations on caviTable entries. An entry is created in the table by setting this object to createAndGo(4). An entry is deleted from the table by setting this object to destroy(6). An entry in this table may be modified after creation.
Context
- MIB
- CISCO-ATM-VIRTUAL-IF-MIB
- OID
.1.3.6.1.4.1.9.9.129.1.1.1.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- caviEntry
- Table
- caviTable
- Siblings
- 10
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| caviIndex A unique value for the ATM virtual interface. | column | Integer32 | .1.3.6.1.4.1.9.9.129.1.1.1.1.1 |
| caviMinVpiNum This object is mandatory while configuring this ATM virtual
interface as caviIfType evuni(5) or evnni(6). The range of
VPI accepted by the agent depends on caviIfType.
… | column | ATM-TC-MIBAtmVpIdentifier | .1.3.6.1.4.1.9.9.129.1.1.1.1.10 |
| caviMaxVpiNum This object is mandatory while configuring this ATM virtual
interface as caviIfType evuni(5) or evnni(6). The range of
VPI accepted by the agent depends on caviIfType.
… | column | ATM-TC-MIBAtmVpIdentifier | .1.3.6.1.4.1.9.9.129.1.1.1.1.11 |
| caviPhyIfIndex This object identifies the interface number ( 'ifIndex' ) assigned
to sonet(39),ds3(30),ds1(18),atmIma(107). | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.9.9.129.1.1.1.1.2 |
| caviViIfIndex This object identifies the ATM virtual interface number
('ifIndex') assigned to this entry, and is used
to identify corresponding rows in the IF-MIB.
Note that re-inititalization … | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.9.9.129.1.1.1.1.3 |
| caviMinRate ATM virtual interface's guaranteed cell rate.
This is the guaranteed bandwidth allocated for
the interface. The sum of caviMinRate of all ATM
virtual interfaces configured on a si… | column | cells-per-second SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.129.1.1.1.1.4 |
| caviMaxRate ATM virtual interface's maximum cell rate.
If bandwidth is available, the interface will
be allocated bandwidth upto this value.
The total bandwidth of connections configured over… | column | cells-per-second SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.129.1.1.1.1.5 |
| caviFileId The ID of the file that holds module specific configuration
parameters for this ATM virtual interface. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.129.1.1.1.1.6 |
| caviIfType This object reflects the type of ATM virtual interface that can be
configured within a physical interface. The supported types of virtual
interfaces and their description is shown… | column | Enumeration | .1.3.6.1.4.1.9.9.129.1.1.1.1.7 |
| caviVpiNum This object is used when configuring ATM virtual interfaces of
caviIftype vuni(4) or vnni (3). A non-zero value is required
for vuni / vnni operation.
The value se… | column | ATM-TC-MIBAtmVpIdentifier | .1.3.6.1.4.1.9.9.129.1.1.1.1.8 |