caviMaxRate
CISCO-ATM-VIRTUAL-IF-MIB ·
.1.3.6.1.4.1.9.9.129.1.1.1.1.5
Object
ATM virtual interface's maximum cell rate.
If bandwidth is available, the interface will
be allocated bandwidth upto this value.
The total bandwidth of connections configured over this
interface cannot exceed this value.
The value of this object can't exceed the 'ifSpeed' or
'ifHighSpeed' value in ifTable for the associated
'caviPhyIfIndex'.
ATM cell bandwidths for various physical lines are:
OC192 line : 22605280 cells/sec
OC48 line : 5651320 cells/sec
OC12 line : 1412830 cells/sec
OC3 line : 353207 cells/sec
T3 line : 96000 cells/sec
E3 line : 80000 cells/sec.
Context
- MIB
- CISCO-ATM-VIRTUAL-IF-MIB
- OID
.1.3.6.1.4.1.9.9.129.1.1.1.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Units
- cells-per-second
- Parent
- caviEntry
- Table
- caviTable
- Siblings
- 10
Syntax
cells-per-second SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| caviIndex A unique value for the ATM virtual interface. | column | Integer32 | .1.3.6.1.4.1.9.9.129.1.1.1.1.1 |
| caviMinVpiNum This object is mandatory while configuring this ATM virtual
interface as caviIfType evuni(5) or evnni(6). The range of
VPI accepted by the agent depends on caviIfType.
… | column | ATM-TC-MIBAtmVpIdentifier | .1.3.6.1.4.1.9.9.129.1.1.1.1.10 |
| caviMaxVpiNum This object is mandatory while configuring this ATM virtual
interface as caviIfType evuni(5) or evnni(6). The range of
VPI accepted by the agent depends on caviIfType.
… | column | ATM-TC-MIBAtmVpIdentifier | .1.3.6.1.4.1.9.9.129.1.1.1.1.11 |
| caviPhyIfIndex This object identifies the interface number ( 'ifIndex' ) assigned
to sonet(39),ds3(30),ds1(18),atmIma(107). | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.9.9.129.1.1.1.1.2 |
| caviViIfIndex This object identifies the ATM virtual interface number
('ifIndex') assigned to this entry, and is used
to identify corresponding rows in the IF-MIB.
Note that re-inititalization … | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.9.9.129.1.1.1.1.3 |
| caviMinRate ATM virtual interface's guaranteed cell rate.
This is the guaranteed bandwidth allocated for
the interface. The sum of caviMinRate of all ATM
virtual interfaces configured on a si… | column | cells-per-second SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.129.1.1.1.1.4 |
| caviFileId The ID of the file that holds module specific configuration
parameters for this ATM virtual interface. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.129.1.1.1.1.6 |
| caviIfType This object reflects the type of ATM virtual interface that can be
configured within a physical interface. The supported types of virtual
interfaces and their description is shown… | column | Enumeration | .1.3.6.1.4.1.9.9.129.1.1.1.1.7 |
| caviVpiNum This object is used when configuring ATM virtual interfaces of
caviIftype vuni(4) or vnni (3). A non-zero value is required
for vuni / vnni operation.
The value se… | column | ATM-TC-MIBAtmVpIdentifier | .1.3.6.1.4.1.9.9.129.1.1.1.1.8 |
| caviRowStatus This object allows create and delete operations on caviTable
entries.
An entry is created in the table by setting this object to
createAndGo(4).
An entry is deleted from the table… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.129.1.1.1.1.9 |