charPortEntry
CHARACTER-MIB ·
.1.3.6.1.2.1.19.2.1
Object
row
Status and parameter values for a character port.
Context
- MIB
- CHARACTER-MIB
- OID
.1.3.6.1.2.1.19.2.1- Type
- row
- Status
- current
- Parent
- charPortTable
- Table
- charPortTable
- Children
- 21
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| charPortIndex A unique value for each character port, perhaps
corresponding to the same value of ifIndex when the
character port is associated with a hardware port
represented by an ifIndex. | column | PortIndex | .1.3.6.1.2.1.19.2.1.1 |
| charPortOutFlowType deprecated The port's type of output flow control. 'none'
indicates no flow control at this level or below.
'xonXoff' indicates software flow control by
recognizing XON and XOFF characters.… | column | Enumeration | .1.3.6.1.2.1.19.2.1.10 |
| charPortInFlowState The current operational state of input flow control
on the port. 'none' indicates not applicable.
'unknown' indicates this level does not know.
'stop' indicates flow not allowed.… | column | Enumeration | .1.3.6.1.2.1.19.2.1.11 |
| charPortOutFlowState The current operational state of output flow
control on the port. 'none' indicates not
applicable. 'unknown' indicates this level does not
know. 'stop' indicates flow not allow… | column | Enumeration | .1.3.6.1.2.1.19.2.1.12 |
| charPortInCharacters Total number of characters detected as input from
the port since system re-initialization and while
the port operational state was 'up', 'active', or
'maintenance', including, for… | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.19.2.1.13 |
| charPortOutCharacters Total number of characters detected as output to
the port since system re-initialization and while
the port operational state was 'up', 'active', or
'maintenance', including, for … | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.19.2.1.14 |
| charPortAdminOrigin The administratively allowed origin for
establishing session on the port. 'dynamic' allows
'network' or 'local' session establishment. 'none'
disallows session establishment. | column | Enumeration | .1.3.6.1.2.1.19.2.1.15 |
| charPortSessionMaximum The maximum number of concurrent sessions allowed
on the port. A value of -1 indicates no maximum.
Setting the maximum to less than the current number
of sessions has unspecified… | column | Integer32 | .1.3.6.1.2.1.19.2.1.16 |
| charPortSessionNumber The number of open sessions on the port that are in
the connecting, connected, or disconnecting state. | column | SNMPv2-SMIGauge32 | .1.3.6.1.2.1.19.2.1.17 |
| charPortSessionIndex The value of charSessIndex for the port's first or
only active session. If the port has no active
session, the agent returns the value zero. | column | Integer32 | .1.3.6.1.2.1.19.2.1.18 |
| charPortInFlowTypes The port's types of input flow control at the
software level. Hardware-level flow control is
independently controlled by the appropriate
hardware-level MIB.
A valu… | column | OctetString | .1.3.6.1.2.1.19.2.1.19 |
| charPortName An administratively assigned name for the port,
typically with some local significance. | column | OctetString | .1.3.6.1.2.1.19.2.1.2 |
| charPortOutFlowTypes The port's types of output flow control at the
software level. Hardware-level flow control is
independently controlled by the appropriate
hardware-level MIB.
… | column | OctetString | .1.3.6.1.2.1.19.2.1.20 |
| charPortLowerIfIndex The ifIndex value of the lower level hardware supporting
this character port, zero if none. | column | IF-MIBInterfaceIndex | .1.3.6.1.2.1.19.2.1.21 |
| charPortType The port's type, 'physical' if the port represents
an external hardware connector, 'virtual' if it does
not. | column | Enumeration | .1.3.6.1.2.1.19.2.1.3 |
| charPortHardware A reference to hardware MIB definitions specific to
a physical port's external connector. For example,
if the connector is RS-232, then the value of this
object refers to a MIB s… | column | SNMPv2-TCAutonomousType | .1.3.6.1.2.1.19.2.1.4 |
| charPortReset A control to force the port into a clean, initial
state, both hardware and software, disconnecting all
the port's existing sessions. In response to a
get-request or get-next-requ… | column | Enumeration | .1.3.6.1.2.1.19.2.1.5 |
| charPortAdminStatus The port's desired state, independent of flow
control. 'enabled' indicates that the port is
allowed to pass characters and form new sessions.
'disabled' indicates that the port i… | column | Enumeration | .1.3.6.1.2.1.19.2.1.6 |
| charPortOperStatus The port's actual, operational state, independent
of flow control. 'up' indicates able to function
normally. 'down' indicates inability to function
for administra… | column | Enumeration | .1.3.6.1.2.1.19.2.1.7 |
| charPortLastChange The value of sysUpTime at the time the port entered
its current operational state. If the current state
was entered prior to the last reinitialization of
the local network manage… | column | SNMPv2-SMITimeTicks | .1.3.6.1.2.1.19.2.1.8 |
| charPortInFlowType deprecated The port's type of input flow control. 'none'
indicates no flow control at this level or below.
'xonXoff' indicates software flow control by
recognizing XON and XOFF characters. … | column | Enumeration | .1.3.6.1.2.1.19.2.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| charPortIndex A unique value for each character port, perhaps
corresponding to the same value of ifIndex when the
character port is associated with a hardware port
represented by an ifIndex. | column | PortIndex | .1.3.6.1.2.1.19.2.1.1 |