cabhCdpTimeOffsetSelection
CABH-CDP-MIB ·
.1.3.6.1.4.1.4491.2.4.4.1.1.7
Object
scalar
r/w
Enumeration
This object selects the source to be used by the PS in
determining the time offset to the time of day acquired
from the time server. It is intended to be used in cases
where the time zone information provisioned by the ToD
server or DHCP Server (in DHCP Option 2) is different from
the time zone where the provisioned device is physically
located.
Setting this object to useDhcpOption2(1) configures the PS
to use the value of DHCP Option 2 from the DHCP ACK message
for time of day offset. Setting this object to
useSnmpSetOffset(2) configures the PS to use the value of
cabhCdpServerSnmpSetTimeOffset for time of day offset, and
to ignore DHCP Option 2. When the value of this object is
changed the PS MUST immediately begin using the time
offset specified by the value of this object, regardless
of which time offset the PS was using before the update
occurred.
Context
- MIB
- CABH-CDP-MIB
- OID
.1.3.6.1.4.1.4491.2.4.4.1.1.7- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- cabhCdpBase
- Siblings
- 8
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | useDhcpOption2 |
2 | useSnmpSetOffset |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cabhCdpSetToFactory Reading this object always returns false(2). When the
cabhCdpSetToFactory object is set to true(1), the PS must
take the following actions:
1. Clear all cabhCdpLanAddrEntries in t… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4491.2.4.4.1.1.1 |
| cabhCdpLanTransCurCount The current number of active leases in the
cabhCdpLanAddrTable (the number of row entries in the
table that have a cabhCdpLanAddrMethod value of
reservationActive(2) or dynamicAct… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4491.2.4.4.1.1.2 |
| cabhCdpLanTransThreshold The threshold number of LAN-Trans IP addresses allocated
or assigned above which the PS generates an alarm
condition. Whenever an attempt is made to allocate a
LAN-Trans IP addres… | scalar | Integer32 | .1.3.6.1.4.1.4491.2.4.4.1.1.3 |
| cabhCdpLanTransAction The action taken when the CDS assigns a LAN-Trans
address and the number of LAN-Trans addresses assigned
(cabhCdpLanTransCurCount) is greater than the threshold
(cabhCdpLanTransTh… | scalar | Enumeration | .1.3.6.1.4.1.4491.2.4.4.1.1.4 |
| cabhCdpWanDataIpAddrCount This is the number of WAN-Data IP addresses the
PS's CDC must attempt to acquire via DHCP. When
this MIB object is incremented the CDC MUST
immediately attempt to acquire addition… | scalar | Integer32 | .1.3.6.1.4.1.4491.2.4.4.1.1.5 |
| cabhCdpLastSetToFactory The value of sysUpTime when cabhCdpSetToFactory was
last set to true. Zero if never reset. | scalar | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.4491.2.4.4.1.1.6 |
| cabhCdpSnmpSetTimeOffset This object is intended to be used in cases where the
service provider's provisioning system serves devices in
multiple time zones, or for other times when the service
provider wa… | scalar | seconds Integer32 | .1.3.6.1.4.1.4491.2.4.4.1.1.8 |
| cabhCdpDaylightSavingTimeEnable This object allows a manager to configure the PS to adjust
the current time of day based on Daylight Saving Time. If
the value of this object is enabled(1), the PS adds 3600
secon… | scalar | Enumeration | .1.3.6.1.4.1.4491.2.4.4.1.1.9 |