cabhCdpSnmpSetTimeOffset
CABH-CDP-MIB ·
.1.3.6.1.4.1.4491.2.4.4.1.1.8
Object
scalar
r/w
seconds Integer32
This object is intended to be used in cases where the
service provider's provisioning system serves devices in
multiple time zones, or for other times when the service
provider wants UTC time offset to be provisioned in a
device other than from the ToD server or from the DHCP
Server (in DHCP Option 2).
This object allows a manager to set a value for UTC time
offset. If DHCP Option 2 is not present in the DHCP ACK
message, or if the value of DHCP Option 2 is null, and time
offset information is not provided in the response received
from the time of day server, the PS MUST add the value of
cabhCdpServerTimeOffset to the UTC time acquired from the
time of day server to create the current time of day.
If the value of cabhCdpServerTimeOffsetSelection is
useSnmpSetOffset(2), the PS adds the value of
cabhCdpServerSnmpSetTimeOffset to the UTC time acquired
from the time of day server to create the current time
of day.
If the value of cabhCdpServerTimeOffsetSelection is
useDhcpOption2(1) the PS ignores
cabhCdpServerSnmpSetTimeOffset.
Context
- MIB
- CABH-CDP-MIB
- OID
.1.3.6.1.4.1.4491.2.4.4.1.1.8- Type
- scalar
- Access
- readwrite
- Status
- current
- Units
- seconds
- Parent
- cabhCdpBase
- Siblings
- 8
Syntax
seconds Integer32
Values & Constraints
Object Constraints
range: -43200-46800
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cabhCdpSetToFactory Reading this object always returns false(2). When the
cabhCdpSetToFactory object is set to true(1), the PS must
take the following actions:
1. Clear all cabhCdpLanAddrEntries in t… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4491.2.4.4.1.1.1 |
| cabhCdpLanTransCurCount The current number of active leases in the
cabhCdpLanAddrTable (the number of row entries in the
table that have a cabhCdpLanAddrMethod value of
reservationActive(2) or dynamicAct… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4491.2.4.4.1.1.2 |
| cabhCdpLanTransThreshold The threshold number of LAN-Trans IP addresses allocated
or assigned above which the PS generates an alarm
condition. Whenever an attempt is made to allocate a
LAN-Trans IP addres… | scalar | Integer32 | .1.3.6.1.4.1.4491.2.4.4.1.1.3 |
| cabhCdpLanTransAction The action taken when the CDS assigns a LAN-Trans
address and the number of LAN-Trans addresses assigned
(cabhCdpLanTransCurCount) is greater than the threshold
(cabhCdpLanTransTh… | scalar | Enumeration | .1.3.6.1.4.1.4491.2.4.4.1.1.4 |
| cabhCdpWanDataIpAddrCount This is the number of WAN-Data IP addresses the
PS's CDC must attempt to acquire via DHCP. When
this MIB object is incremented the CDC MUST
immediately attempt to acquire addition… | scalar | Integer32 | .1.3.6.1.4.1.4491.2.4.4.1.1.5 |
| cabhCdpLastSetToFactory The value of sysUpTime when cabhCdpSetToFactory was
last set to true. Zero if never reset. | scalar | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.4491.2.4.4.1.1.6 |
| cabhCdpTimeOffsetSelection This object selects the source to be used by the PS in
determining the time offset to the time of day acquired
from the time server. It is intended to be used in cases
where the … | scalar | Enumeration | .1.3.6.1.4.1.4491.2.4.4.1.1.7 |
| cabhCdpDaylightSavingTimeEnable This object allows a manager to configure the PS to adjust
the current time of day based on Daylight Saving Time. If
the value of this object is enabled(1), the PS adds 3600
secon… | scalar | Enumeration | .1.3.6.1.4.1.4491.2.4.4.1.1.9 |