cabhCdpSetToFactory
CABH-CDP-MIB ·
.1.3.6.1.4.1.4491.2.4.4.1.1.1
Object
Reading this object always returns false(2). When the
cabhCdpSetToFactory object is set to true(1), the PS must
take the following actions:
1. Clear all cabhCdpLanAddrEntries in the CDP LAN Address
Table.
2. The CDS must offer the factory default DHCP options
at the next lease renewal time.
3. Reset the following objects to their factory default
values:
cabhCdpLanTransThreshold,
cabhCdpLanTransAction,
cabhCdpWanDataIpAddrCount,
cabhCdpTimeOffsetSelection,
cabhCdpSnmpSetTimeOffset,
cabhCdpDaylightSavingTimeEnable,
cabhCdpLanPoolStartType,
cabhCdpLanPoolStart,
cabhCdpLanPoolEndType,
cabhCdpLanPoolEnd,
cabhCdpServerNetworkNumberType,
cabhCdpServerNetworkNumber,
cabhCdpServerSubnetMaskType,
cabhCdpServerSubnetMask,
cabhCdpServerTimeOffset,
cabhCdpServerRouterType,
cabhCdpServerRouter,
cabhCdpServerDnsAddressType,
cabhCdpServerDnsAddress,
cabhCdpServerSyslogAddressType,
cabhCdpServerSyslogAddress,
cabhCdpServerDomainName,
cabhCdpServerTTL,
cabhCdpServerInterfaceMTU,
cabhCdpServerVendorSpecific,
cabhCdpServerLeaseTime,
cabhCdpServerDhcpAddressType,
cabhCdpServerDhcpAddress,
cabhCdpServerCommitStatus
Context
- MIB
- CABH-CDP-MIB
- OID
.1.3.6.1.4.1.4491.2.4.4.1.1.1- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- cabhCdpBase
- Siblings
- 8
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cabhCdpLanTransCurCount The current number of active leases in the
cabhCdpLanAddrTable (the number of row entries in the
table that have a cabhCdpLanAddrMethod value of
reservationActive(2) or dynamicAct… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4491.2.4.4.1.1.2 |
| cabhCdpLanTransThreshold The threshold number of LAN-Trans IP addresses allocated
or assigned above which the PS generates an alarm
condition. Whenever an attempt is made to allocate a
LAN-Trans IP addres… | scalar | Integer32 | .1.3.6.1.4.1.4491.2.4.4.1.1.3 |
| cabhCdpLanTransAction The action taken when the CDS assigns a LAN-Trans
address and the number of LAN-Trans addresses assigned
(cabhCdpLanTransCurCount) is greater than the threshold
(cabhCdpLanTransTh… | scalar | Enumeration | .1.3.6.1.4.1.4491.2.4.4.1.1.4 |
| cabhCdpWanDataIpAddrCount This is the number of WAN-Data IP addresses the
PS's CDC must attempt to acquire via DHCP. When
this MIB object is incremented the CDC MUST
immediately attempt to acquire addition… | scalar | Integer32 | .1.3.6.1.4.1.4491.2.4.4.1.1.5 |
| cabhCdpLastSetToFactory The value of sysUpTime when cabhCdpSetToFactory was
last set to true. Zero if never reset. | scalar | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.4491.2.4.4.1.1.6 |
| cabhCdpTimeOffsetSelection This object selects the source to be used by the PS in
determining the time offset to the time of day acquired
from the time server. It is intended to be used in cases
where the … | scalar | Enumeration | .1.3.6.1.4.1.4491.2.4.4.1.1.7 |
| cabhCdpSnmpSetTimeOffset This object is intended to be used in cases where the
service provider's provisioning system serves devices in
multiple time zones, or for other times when the service
provider wa… | scalar | seconds Integer32 | .1.3.6.1.4.1.4491.2.4.4.1.1.8 |
| cabhCdpDaylightSavingTimeEnable This object allows a manager to configure the PS to adjust
the current time of day based on Daylight Saving Time. If
the value of this object is enabled(1), the PS adds 3600
secon… | scalar | Enumeration | .1.3.6.1.4.1.4491.2.4.4.1.1.9 |