brpsTCPIPUseMethod
BROTHER-MIB ·
.1.3.6.1.4.1.2435.2.4.3.1240.5.2.16
Object
scalar
mandatory
r/w
Integer32
Method type that used set up TCP/IP configuration.
Context
- MIB
- BROTHER-MIB
- OID
.1.3.6.1.4.1.2435.2.4.3.1240.5.2.16- Type
- scalar
- Access
- readwrite
- Status
- mandatory
- Parent
- brtcpip
- Siblings
- 21
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-7
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| brpsTCPIPSupported mandatory 0 indicates the TCP/IP protocol is not supported. 1 indicates TCP/IP
support is implemented by the firmware | scalar | Integer32 | .1.3.6.1.4.1.2435.2.4.3.1240.5.2.1 |
| brpsTCPIPRARPNoSubnet mandatory If enabled, do not set the subnet mask based on the RARP response. | scalar | Integer32 | .1.3.6.1.4.1.2435.2.4.3.1240.5.2.10 |
| brpsTCPIPRARPNoGateway mandatory If enabled, do not set the gateway/router address based on the RARP response. | scalar | Integer32 | .1.3.6.1.4.1.2435.2.4.3.1240.5.2.11 |
| brpsTCPIPUpdate mandatory Hardware MAC address to be updated. This value is write only. Will
read back as zeros. | scalar | OctetString | .1.3.6.1.4.1.2435.2.4.3.1240.5.2.12 |
| brpsTCPIPBanner mandatory 0 indicates the LPR banner print is not enabled.
1 indicates that the LPR banner print is enabled. | scalar | Integer32 | .1.3.6.1.4.1.2435.2.4.3.1240.5.2.13 |
| brpsTCPIPFastTimeoutEnable mandatory 0 indicates the fast timeout is not enabled.
1 indicates that the fast timeout is enabled. | scalar | Integer32 | .1.3.6.1.4.1.2435.2.4.3.1240.5.2.14 |
| brpsTCPIPLPRRetryEnable mandatory 0 indicates the LPR print retry is not enabled.
1 indicates that the LPR print retry is enabled. | scalar | Integer32 | .1.3.6.1.4.1.2435.2.4.3.1240.5.2.15 |
| brpsTCPIPMethodServer mandatory If TCP/IP configuration is setted up by any protocol server,
this entry indicates the IP address of the server. | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.2435.2.4.3.1240.5.2.17 |
| brpsTCPIPAccessTable mandatory This table represents the list of IP address of node that has
parmittion for access.Up to 16 Netware addresses can be enabled. | table | - | .1.3.6.1.4.1.2435.2.4.3.1240.5.2.18 |
| brpsAdvancedTCPIPAccessSupported mandatory 0 indicates the Advanced TCP/IP Access is not supported.
1 indicates Advanced TCP/IP Access support is implemented
by the firmware | scalar | Integer32 | .1.3.6.1.4.1.2435.2.4.3.1240.5.2.19 |
| brpsTCPIPEnable mandatory 0 indicates the TCP/IP protocol is not enabled. 1 indicates that the
TCP/IP protocol is enabled. Writing a non-zero value will enable the
TCP/IP protocol if it is supported by the… | scalar | Integer32 | .1.3.6.1.4.1.2435.2.4.3.1240.5.2.2 |
| brpsAdvancedTCPIPAccessEnable mandatory 0 indicates the Advanced TCP/IP Access is not enabled.
1 indicates that the Advanced TCP/IP Access is enabled. | scalar | Integer32 | .1.3.6.1.4.1.2435.2.4.3.1240.5.2.20 |
| brpsAdvancedTCPIPAccessAdministratorIPAddress mandatory Administrator IPAddress. | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.2435.2.4.3.1240.5.2.21 |
| brpsAdvancedTCPIPAccessSetting mandatory 0 indicates the Advanced TCP/IP Access is reject.
1 indicates that the Advanced TCP/IP Access is Accept. | scalar | Integer32 | .1.3.6.1.4.1.2435.2.4.3.1240.5.2.22 |
| brpsTCPIPAddress mandatory IP Address assigned to the print server. | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.2435.2.4.3.1240.5.2.3 |
| brpsTCPIPSubnetMask mandatory Subnet mask assigned to the print server. | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.2435.2.4.3.1240.5.2.4 |
| brpsTCPIPGateway mandatory Gateway/Router address assigned to the print server. | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.2435.2.4.3.1240.5.2.5 |
| brpsTCPIPMethod mandatory Method used to determine the IP Address. AUTO tries all protocols.
STATIC uses the configured address. DHCP, BOOTP, and RARP use only
that protocol. | scalar | Integer32 | .1.3.6.1.4.1.2435.2.4.3.1240.5.2.6 |
| brpsTCPIPTimeout mandatory Timeout used for LPD connections. | scalar | Integer32 | .1.3.6.1.4.1.2435.2.4.3.1240.5.2.7 |
| brpsTCPIPBootTries mandatory Number of attempts to use BOOTP, RARP, and DHCP. | scalar | Integer32 | .1.3.6.1.4.1.2435.2.4.3.1240.5.2.8 |
| brpsTCPIPMaxWindow mandatory Maximum window size for TCP connections. Due to resource limitations
setting the window to values greater than 10240 is not recommended. | scalar | Integer32 | .1.3.6.1.4.1.2435.2.4.3.1240.5.2.9 |