broriginalLPD
BROTHER-MIB ·
.1.3.6.1.4.1.2435.2.4.3.2435.5.22
Object
node
No description available.
Context
- MIB
- BROTHER-MIB
- OID
.1.3.6.1.4.1.2435.2.4.3.2435.5.22- Type
- node
- Parent
- broriginalprotocol
- Siblings
- 21
- Children
- 2
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| broriginalftp | node | - | .1.3.6.1.4.1.2435.2.4.3.2435.5.10 |
| broriginalSecurity | node | - | .1.3.6.1.4.1.2435.2.4.3.2435.5.100 |
| broriginalupnp | node | - | .1.3.6.1.4.1.2435.2.4.3.2435.5.11 |
| broriginalapipa | node | - | .1.3.6.1.4.1.2435.2.4.3.2435.5.12 |
| broriginalmdns | node | - | .1.3.6.1.4.1.2435.2.4.3.2435.5.13 |
| broriginalLAA | node | - | .1.3.6.1.4.1.2435.2.4.3.2435.5.14 |
| broriginalIPv6 | node | - | .1.3.6.1.4.1.2435.2.4.3.2435.5.15 |
| broriginaltelnet | node | - | .1.3.6.1.4.1.2435.2.4.3.2435.5.16 |
| broriginalEWS | node | - | .1.3.6.1.4.1.2435.2.4.3.2435.5.17 |
| broriginalSNMP | node | - | .1.3.6.1.4.1.2435.2.4.3.2435.5.18 |
| broriginalldap | node | - | .1.3.6.1.4.1.2435.2.4.3.2435.5.19 |
| broriginaltcpip | node | - | .1.3.6.1.4.1.2435.2.4.3.2435.5.2 |
| broriginalTFTP | node | - | .1.3.6.1.4.1.2435.2.4.3.2435.5.20 |
| broriginalHTTPS | node | - | .1.3.6.1.4.1.2435.2.4.3.2435.5.21 |
| broriginalRawPort | node | - | .1.3.6.1.4.1.2435.2.4.3.2435.5.23 |
| broriginalLLTD | node | - | .1.3.6.1.4.1.2435.2.4.3.2435.5.24 |
| broriginalWebServices | node | - | .1.3.6.1.4.1.2435.2.4.3.2435.5.25 |
| broriginalLLMNR | node | - | .1.3.6.1.4.1.2435.2.4.3.2435.5.26 |
| broriginalKerberos | node | - | .1.3.6.1.4.1.2435.2.4.3.2435.5.27 |
| broriginalCIFS | node | - | .1.3.6.1.4.1.2435.2.4.3.2435.5.28 |
| broriginalSNTP | node | - | .1.3.6.1.4.1.2435.2.4.3.2435.5.29 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| brLPDSupported mandatory 0 indicates the LPD protocol is not supported.
1 indicates LPD support is implemented by the firmware | scalar | Integer32 | .1.3.6.1.4.1.2435.2.4.3.2435.5.22.1 |
| brLPDEnable mandatory 0 indicates the LPD protocol is not enabled.
1 indicates that the LPD protocol is enabled.
Writing a non-zero value will enable the LPD
protocol if it is supported by the firmware. | scalar | Integer32 | .1.3.6.1.4.1.2435.2.4.3.2435.5.22.2 |