swFCPortLipLastAlpa
BROCADE-SYSTEM-MIB ·
.1.3.6.1.4.1.1588.2.1.1.1.6.2.1.33
Object
column
OctetString
This object indicates the Physical Address (AL_PA) of the loop device that initiated the last Loop Initialization.
Context
- MIB
- BROCADE-SYSTEM-MIB
- OID
.1.3.6.1.4.1.1588.2.1.1.1.6.2.1.33- Type
- column
- Access
- readonly
- Status
- current
- Parent
- swFCPortEntry
- Table
- swFCPortTable
- Siblings
- 35
Syntax
OctetString
Values & Constraints
Object Constraints
range: 4-4
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| swFCPortIndex This object identifies the switch port index.
Note that the value of a port index is 1 higher than the
port number labeled on the front panel.
E.g. port index 1 correspond to port… | column | Brocade-TCSwPortIndex | .1.3.6.1.4.1.1588.2.1.1.1.6.2.1.1 |
| swFCPortTxWords This object counts the number of Fibre Channel
words that the port has transmitted. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1588.2.1.1.1.6.2.1.11 |
| swFCPortRxWords This object counts the number of Fibre Channel
words that the port has received. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1588.2.1.1.1.6.2.1.12 |
| swFCPortTxFrames This object counts the number of (Fibre Channel)
frames that the port has transmitted. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1588.2.1.1.1.6.2.1.13 |
| swFCPortRxFrames This object counts the number of (Fibre Channel)
frames that the port has received. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1588.2.1.1.1.6.2.1.14 |
| swFCPortRxC2Frames This object counts the number of Class 2
frames that the port has received. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1588.2.1.1.1.6.2.1.15 |
| swFCPortRxC3Frames This object counts the number of Class 3
frames that the port has received. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1588.2.1.1.1.6.2.1.16 |
| swFCPortRxLCs This object counts the number of Link Control
frames that the port has received. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1588.2.1.1.1.6.2.1.17 |
| swFCPortRxMcasts This object counts the number of Multicast
frames that the port has received. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1588.2.1.1.1.6.2.1.18 |
| swFCPortTooManyRdys This object counts the number of times when RDYs
exceeds the frames received. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1588.2.1.1.1.6.2.1.19 |
| swFCPortType This object identifies the type of switch port.
It may be of type stitch(1), flannel(2), loom(3) , bloom(4),rdbloom(5) or wormhole(6). | column | Enumeration | .1.3.6.1.4.1.1588.2.1.1.1.6.2.1.2 |
| swFCPortNoTxCredits This object counts the number of times when the
transmit credit has reached zero. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1588.2.1.1.1.6.2.1.20 |
| swFCPortRxEncInFrs This object counts the number of encoding error or
disparity error inside frames received. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1588.2.1.1.1.6.2.1.21 |
| swFCPortRxCrcs This object counts the number of CRC errors
detected for frames received. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1588.2.1.1.1.6.2.1.22 |
| swFCPortRxTruncs This object counts the number of truncated
frames that the port has received. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1588.2.1.1.1.6.2.1.23 |
| swFCPortRxTooLongs This object counts the number of received frames that
are too long. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1588.2.1.1.1.6.2.1.24 |
| swFCPortRxBadEofs This object counts the number of received frames that
have bad EOF delimiter. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1588.2.1.1.1.6.2.1.25 |
| swFCPortRxEncOutFrs This object counts the number of encoding error or
disparity error outside frames received. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1588.2.1.1.1.6.2.1.26 |
| swFCPortRxBadOs This object counts the number of invalid Ordered
Sets received. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1588.2.1.1.1.6.2.1.27 |
| swFCPortC3Discards This object counts the number of Class 3
frames that the port has discarded. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1588.2.1.1.1.6.2.1.28 |
| swFCPortMcastTimedOuts This object counts the number of Multicast
frames that has been timed out. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1588.2.1.1.1.6.2.1.29 |
| swFCPortPhyState This object identifies the physical state of
the port:
noCard(1) no card present in this switch slot;
noTransceiver(2) no Transceiver module in this port.
… | column | Enumeration | .1.3.6.1.4.1.1588.2.1.1.1.6.2.1.3 |
| swFCPortTxMcasts This object counts the number of Multicast
frames that has been transmitted. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1588.2.1.1.1.6.2.1.30 |
| swFCPortLipIns This object counts the number of Loop Initializations
that has been initiated by loop devices attached. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1588.2.1.1.1.6.2.1.31 |
| swFCPortLipOuts This object counts the number of Loop Initializations
that has been initiated by the port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1588.2.1.1.1.6.2.1.32 |
| swFCPortWwn The World_wide_Name of the Fibre Channel port.
The contents of an instance are in the IEEE extended format
as specified in FC-PH; the 12-bit port identifier represents
the port nu… | column | OctetString | .1.3.6.1.4.1.1588.2.1.1.1.6.2.1.34 |
| swFCPortSpeed The desired baud rate for the port. It can have the
values of 1GB (1), 2GB (2), Auto-Negotiate (3), 4GB (4), 8GB (5),
or 10GB (6). Some of the above values may not be supported
by… | column | Enumeration | .1.3.6.1.4.1.1588.2.1.1.1.6.2.1.35 |
| swFCPortName A string indicates the name of the addressed port.
The names should be persistent across switch reboots.
Port names do not have to be unique within a switch or
within a fabric. | column | OctetString | .1.3.6.1.4.1.1588.2.1.1.1.6.2.1.36 |
| swFCPortSpecifier This string indicates the physical port number of the addressed port.
The format of the string is: <slot>/port, where 'slot' being
present only for bladed systems. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1588.2.1.1.1.6.2.1.37 |
| swFCPortFlag A bit map of port status flags which includes the information of port type.
Currently this will indicate if the port is virtual or physical. | column | FcPortFlag | .1.3.6.1.4.1.1588.2.1.1.1.6.2.1.38 |
| swFCPortBrcdType The Brocade port type. | column | Enumeration | .1.3.6.1.4.1.1588.2.1.1.1.6.2.1.39 |
| swFCPortOpStatus This object identifies the operational status of
the port. The online(1) state indicates that user frames
can be passed. The unknown(0) state indicates that likely
the port module… | column | Enumeration | .1.3.6.1.4.1.1588.2.1.1.1.6.2.1.4 |
| swFCPortAdmStatus The desired state of the port. A management station
may place the port in a desired state by setting this
object accordingly. The testing(3) state indicates that
no user frames c… | column | Enumeration | .1.3.6.1.4.1.1588.2.1.1.1.6.2.1.5 |
| swFCPortLinkState This object indicates the link state of the port.
The value may be:
enabled(1) - port is allowed to participate in the FC-PH
protocol with its attached port (or ports if it … | column | Enumeration | .1.3.6.1.4.1.1588.2.1.1.1.6.2.1.6 |
| swFCPortTxType This object indicates the media transmitter type of
the port. The value may be:
unknown(1) cannot determined to the port driver
lw(2) long wave laser
sw(3) … | column | Enumeration | .1.3.6.1.4.1.1588.2.1.1.1.6.2.1.7 |