swBootDate
BROCADE-SYSTEM-MIB ·
.1.3.6.1.4.1.1588.2.1.1.1.1.2
Object
scalar
OctetString
The date and time when the system last booted, in displayable textual format.
Context
- MIB
- BROCADE-SYSTEM-MIB
- OID
.1.3.6.1.4.1.1588.2.1.1.1.1.2- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- swSystem
- Siblings
- 19
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-64
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| swCurrentDate The current date information in displayable textual
format. | scalar | OctetString | .1.3.6.1.4.1.1588.2.1.1.1.1.1 |
| swSsn The soft serial number of the switch. | scalar | OctetString | .1.3.6.1.4.1.1588.2.1.1.1.1.10 |
| swFlashDLOperStatus The operational status of the FLASH.
The operational states are as follow:
o swCurrent(1) indicates that the FLASH contains the
current firmware image or config file;
o swFwUpgr… | scalar | Enumeration | .1.3.6.1.4.1.1588.2.1.1.1.1.11 |
| swFlashDLAdmStatus The state of the FLASH.
o swCurrent(1) indicates that the FLASH contains the
current firmware image or config file;
o swFwUpgrade(2) means that the firmware in the FLASH is to b… | scalar | Enumeration | .1.3.6.1.4.1.1588.2.1.1.1.1.12 |
| swBeaconOperStatus The current operational status of the switch beacon.
When the beacon is on, the LEDs on the front panel
of the switch run alternately from left to right
and right to left. The col… | scalar | Enumeration | .1.3.6.1.4.1.1588.2.1.1.1.1.18 |
| swBeaconAdmStatus The desired status of the switch beacon.
When the beacon is set to on, the LEDs on the front
panel of the switch run alternately from left to right
and right to left. The color is… | scalar | Enumeration | .1.3.6.1.4.1.1588.2.1.1.1.1.19 |
| swDiagResult The result of the power-on startup (POST)
diagnostics. | scalar | Enumeration | .1.3.6.1.4.1.1588.2.1.1.1.1.20 |
| swNumSensors The number of sensors inside the switch. | scalar | Integer32 | .1.3.6.1.4.1.1588.2.1.1.1.1.21 |
| swSensorTable The table of sensor entries. | table | - | .1.3.6.1.4.1.1588.2.1.1.1.1.22 |
| swID The number of the logical switch (0/1). | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1588.2.1.1.1.1.24 |
| swEtherIPAddress The IP Address of the Ethernet interface of this logical
switch. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1588.2.1.1.1.1.25 |
| swEtherIPMask The IP Mask of the Ethernet interface of this logical switch. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1588.2.1.1.1.1.26 |
| swIPv6Address IPV6 address. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1588.2.1.1.1.1.29 |
| swFWLastUpdated The information indicates the date when the firmware
was last updated, in displayable textual format. | scalar | OctetString | .1.3.6.1.4.1.1588.2.1.1.1.1.3 |
| swIPv6Status The current status of ipv6 address. | scalar | Enumeration | .1.3.6.1.4.1.1588.2.1.1.1.1.30 |
| swFlashLastUpdated The information indicates the date when the FLASH
was last updated, in displayable textual format. | scalar | OctetString | .1.3.6.1.4.1.1588.2.1.1.1.1.4 |
| swBootPromLastUpdated The information indicates the date when the boot PROM
was last updated, in displayable textual format. | scalar | OctetString | .1.3.6.1.4.1.1588.2.1.1.1.1.5 |
| swFirmwareVersion The current version of the firwmare. | scalar | OctetString | .1.3.6.1.4.1.1588.2.1.1.1.1.6 |
| swOperStatus The current operational status of the switch.
The states are as follow:
o online(1) means the switch is accessible by an external
port;
o offline(2) means the switch is not acce… | scalar | Enumeration | .1.3.6.1.4.1.1588.2.1.1.1.1.7 |